As the size and number of wind power plants (also called wind farms) increases, power system planners will need to study their impact on the power system in more detail. As the level of wind power penetration into the grid increases, the transmission system integration requirements becomes more critical. A very large wind power plant may contain hundreds of megawatt-size wind turbines. These turbines are interconnected by an intricate collector system. While the impact of individual turbines on the larger power system network is minimal, collectively, wind turbines can have a significant impact on the power systems during a severe disturbance such as a nearby fault. Since it is not practical to represent all individual wind turbines to conduct simulations, a simplified equivalent representation is required. This paper focuses on our effort to develop an equivalent representation of a wind power plant collector system for power system planning studies. The layout of the wind power plant, the size and type of conductors used, and the method of delivery (overhead or buried cables) all influence the performance of the collector system inside the wind power plant. Our effort to develop an equivalent representation of the collector system for wind power plants is an attempt to simplify power system modeling for future developments or planned expansions of wind power plants. Although we use a specific large wind power plant as a case study, the concept is applicable for any type of wind power plant
[1]
Richard R. Gaillardetz,et al.
Making the Connections
,
2002
.
[2]
William Kersting,et al.
Distribution System Modeling and Analysis
,
2001,
Electric Power Generation, Transmission, and Distribution: The Electric Power Engineering Handbook.
[3]
D. S. Zinger,et al.
A variable speed wind turbine power control
,
1997
.
[4]
N.W. Miller,et al.
Dynamic modeling of GE 1.5 and 3.6 MW wind turbine-generators for stability simulations
,
2003,
2003 IEEE Power Engineering Society General Meeting (IEEE Cat. No.03CH37491).
[5]
J.C. Smith,et al.
Status of wind-related US national and regional grid code activities
,
2005,
IEEE Power Engineering Society General Meeting, 2005.