CMOS Backplane Pixel Circuit With Leakage and Voltage Drop Compensation for an Micro-LED Display Achieving 5000 PPI or Higher

Micro-displays based on micro-LEDs are becoming more and more attractive in AR/MR (Augmented/Mixed Reality) applications. A display size of 0.5 to 0.7-inch is preferred, with 5,000 PPI (Pixel Per Inch) or higher. Due to this pixel density and size, a CMOS (Complementary Metal-Oxide-Silicon) backplane is an ideal solution to drive these pixelized micro-LEDs. As the required pixel size gets smaller, the design of the appropriate pixel circuit becomes more challenging. The simplest 2T1C (2 transistors & 1 capacitor) pixel circuit has potential problems, due to the leakage current of the switch transistor and the voltage drop on the matrix array layout. In this paper, a pixel circuit is proposed as a solution to overcome these two issues. Our simulation results show that the variation of the driving current to the LED is improved by 95 %, and the IR drop error rate is around 2.2 % compared to the 2T1C circuit. The test results also show that the error rate of IPIXEL for the whole region of display is under 2.5 %. This work is verified using a test chip implementation with 180 nm CMOS process technology.

[1]  Saibal Mukhopadhyay,et al.  Leakage current mechanisms and leakage reduction techniques in deep-submicrometer CMOS circuits , 2003, Proc. IEEE.

[2]  Su Jian,et al.  An Image Enhancement Method Based on Gamma Correction , 2009, 2009 Second International Symposium on Computational Intelligence and Design.

[3]  배병성,et al.  Threshold Voltage and IR drop compensation of an AMOLED Pixel Circuit without VDD line , 2013 .

[4]  M. J. Deen,et al.  DIBL in short-channel NMOS devices at 77 K , 1992 .

[5]  Jae Gwang Um,et al.  Active‐Matrix GaN µ‐LED Display Using Oxide Thin‐Film Transistor Backplane and Flip Chip LED Bonding , 2018, Advanced Electronic Materials.

[6]  F. Fournel,et al.  Chip to wafer direct bonding technologies for high density 3D integration , 2012, 2012 IEEE 62nd Electronic Components and Technology Conference.

[7]  Young-Chai Ko,et al.  High performance and low power timing controller design for LCoS microdisplay system , 2017, 2017 International SoC Design Conference (ISOCC).

[8]  J. Deen,et al.  Fully Multi-Functional GaN-based Micro-LEDs for 2500 PPI Micro-displays, Temperature Sensing, Light Energy Harvesting, and Light Detection , 2018, 2018 IEEE International Electron Devices Meeting (IEDM).

[9]  Hae-Seung Lee,et al.  A CMOS-based microdisplay with calibrated backplane , 2005, ISSCC. 2005 IEEE International Digest of Technical Papers. Solid-State Circuits Conference, 2005..

[10]  Bohr‐Ran Huang,et al.  Novel LTPS-TFT Pixel Circuit with OLED Luminance Compensation for 3D AMOLED Displays , 2016, Journal of Display Technology.

[11]  Oh-Kyong Kwon,et al.  A 2822-ppi Resolution Pixel Circuit With High Luminance Uniformity for OLED Microdisplays , 2016, Journal of Display Technology.

[12]  Ajit Paranjpe,et al.  45‐2: Invited Paper: Micro‐LED Displays: Key Manufacturing Challenges and Solutions , 2018 .

[13]  Uwe Vogel,et al.  OLED-on-Silicon Microdisplays: Technology, Devices, Applications , 2018, 2018 48th European Solid-State Device Research Conference (ESSDERC).

[14]  W. Chong,et al.  Investigation of Photon-Generated Leakage Current for High-Performance Active Matrix Micro-LED Displays , 2016, IEEE Transactions on Electron Devices.

[15]  Keith Strickland.  52‐5: Late-News Paper: The Future of MicroLED Displays using Next‐generation Technologies , 2018 .

[16]  Y. Maekawa,et al.  $V_{T}$ Compensation Circuit for AM OLED Displays Composed of Two TFTs and One Capacitor , 2007, IEEE Transactions on Electron Devices.