Systematic development of optimal activated sludge process designs

Abstract As a result of the complexity of activated sludge systems, most biological water treatment plants have been designed by scale-up, based upon the empirical knowledge gained from pilot plant experiments and simulations. Due to a lack of applicable design methodologies that are able to handle the complexity of the activated sludge process models, systematic process synthesis issues have not received much attention to date. We apply recently developed stochastic optimisation-based synthesis technology for reaction/separation networks to the activated sludge process design problem known as the single sludge denitrification, which aims at performing simultaneous oxidation of the organic matter and complete removal of organic and ammonia nitrogen. The study aims at acquiring design knowledge from the biochemical reactor network with sludge separation and recycles in order to identify design directions towards improved process performances as well as to reveal the scope for improvement. The study reveals designs and the principles behind these that allow for the development of activated sludge processes with significantly enhanced denitrification performance as compared with the conventional, sequential sludge system designs.

[1]  D. Glasser,et al.  The attainable region and optimal reactor structures , 1990 .

[2]  M. Zaiat,et al.  Anaerobic sequencing batch reactors for wastewater treatment: a developing technology , 2001, Applied Microbiology and Biotechnology.

[3]  Antonis C. Kokossis,et al.  Scoping and screening complex reaction networks using stochastic optimization , 1999 .

[4]  G. A. Ekama,et al.  A GENERAL MODEL FOR THE ACTIVATED SLUDGE PROCESS , 1981 .

[5]  S. Isaacs,et al.  An analysis of nitrogen removal and control strategies in an alternating activated sludge process , 1995 .

[6]  Lorenz T. Biegler,et al.  Synthesis of Optimal Chemical Reactor Networks , 1996 .

[7]  A. Rivas,et al.  Selection of operational strategies in activated sludge processes based on optimization algorithms , 1998 .

[8]  K Brindle,et al.  The application of membrane biological reactors for the treatment of wastewaters. , 2000, Biotechnology and bioengineering.

[9]  L. Biegler,et al.  Constructive targeting approaches for the synthesis of chemical reactor networks , 1992 .

[10]  Derin Orhon,et al.  Evaluation of nitrogen removal by step feeding in large treatment plants , 1996 .

[11]  Antonis C. Kokossis,et al.  Nonisothermal synthesis of homogeneous and multiphase reactor networks , 2000 .

[12]  G. Marais,et al.  Evaluation of the General Activated Sludge Model Proposed by the IAWPRC Task Group , 1986 .

[13]  A. C. van Haandel,et al.  The activated sludge process—3 single sludge denitrification , 1981 .

[14]  Antonis C. Kokossis,et al.  Development of novel multiphase reactors using a systematic design framework , 1997 .

[15]  W. Gujer,et al.  A general model for single-sludge wastewater treatment systems , 1987 .

[16]  Ehl Emile Aarts,et al.  Statistical cooling : a general approach to combinatorial optimization problems , 1985 .

[17]  M. Fuerhacker,et al.  Approach for a novel control strategy for simultaneous nitrification/denitrification in activated sludge reactors , 2000 .

[18]  George Tchobanoglous,et al.  Wastewater Engineering Treatment Disposal Reuse , 1972 .