Modeling the Effect of Nail Corrosion on the Lateral Strength of Joints

Abstract This article describes a theoretical method of linking fastener corrosion in wood connections to potential reduction in lateral shear strength. It builds upon published quantitative data o...

[1]  R. Baechler.  Corrosion of Metal Fastenings in Zinc-Chloride-Treated Wood , 1934 .

[2]  K. W. Johansen,et al.  Theory of Timber Connections , 1949 .

[3]  R. A. Legault,et al.  Kinetics of the Atmospheric Corrosion of Low-Alloy Steels in an Industrial Environment , 1975 .

[4]  R. Legault,et al.  Kinetics of the Atmospheric Corrosion of Galvanized Steel , 1978 .

[5]  P. Aune,et al.  Lateral load-bearing capacity of nailed joints based on the yield theory. Theoretical development , 1986 .

[6]  Lawrence A. Soltis,et al.  Bearing Strength of Bolted Timber Joints , 1986 .

[7]  Lawrence A. Soltis,et al.  Bolted-connection design , 1987 .

[8]  M. J. Richards.  Effect of CCA-C wood preservative on moisture content reading by the electronic resistance-type moisture meter. , 1990 .

[9]  Thomas E. McLain.  Strength of Lag‐Screw Connections , 1992 .

[10]  A. Baker,et al.  Corrosion of nails in CCA- and ACA-treated wood in two environments , 1992 .

[11]  Corrosion of nails in wood construction interfaces , 1992 .

[12]  Thomas Lee Wilkinson.  BOLTED CONNECTION DESIGN VALUES BASED ON EUROPEAN YIELD MODEL , 1993 .

[13]  J. K. Dennis,et al.  Corrosion Resistance of Zinc-alloy Coated Steel in Construction Industry Environments , 1997 .

[14]  X. G. Zhang,et al.  Corrosion of Zinc and Zinc Alloys , 2005 .

[15]  E. R. Miller,et al.  The effectiveness of end-grain sealers in improving paint performance on softwood joinery , 1992, Holz als Roh- und Werkstoff.

[16]  E. R. Miller,et al.  The effectiveness of end-grain sealers in improving paint performance in softwood joinery , 1987, Holz als Roh- und Werkstoff.

[17]  Jan Carmeliet,et al.  CONSERVATIVE MODELLING OF THE MOISTURE AND HEAT TRANSFER IN BUILDING COMPONENTS UNDER ATMOSPHERIC EXCITATION , 2007 .

[18]  Douglas R. Rammer,et al.  Electrochemical corrosion testing of fasteners in extracts of treated wood , 2008 .

[19]  G. Kear,et al.  Weight loss studies of fastener materials corrosion in contact with timbers treated with copper azole and alkaline copper quaternary compounds , 2009 .

[20]  N. Guan,et al.  A Comprehensive Review of Copper-Based Wood Preservatives , 2009 .

[21]  Douglas R. Rammer,et al.  Corrosion Rates of Fasteners in Treated Wood Exposed to 100% Relative Humidity , 2009 .

[22]  Donald S. Stone,et al.  Exposure testing of fasteners in preservative treated wood: Gravimetric corrosion rates and corrosion product analyses , 2010 .

[23]  D. Stone,et al.  The effect of tannins and pH on the corrosion of steel in wood extracts , 2011 .

[24]  D. Stone,et al.  Corrosion of metals in wood: Comparing the results of a rapid test method with long-term exposure tests across six wood treatments , 2011 .

[25]  Dominique Derome,et al.  Combining hygrothermal and corrosion models to predict corrosion of metal fasteners embedded in wood , 2011 .

[26]  A. Baker,et al.  Corrosion of metals in preservative-treated wood , 2012 .

[27]  Greg Foliente,et al.  Corrosion effects in the structural design of metal fasteners for timber construction , 2013 .