Preparation and thermodynamic analysis of the porous ZrO2/(ZrO2+Ni) functionally graded bolted joint

[1]  W. Pilkey.  Peterson's Stress Concentration Factors , 2020 .

[2]  L. F. Silva,et al.  Testing and simulation of mixed adhesive joints for aerospace applications , 2015 .

[3]  B. Zuccarello,et al.  Numerical experimental analysis of hybrid double lap aluminum-CFRP joints , 2015 .

[4]  D. Fang,et al.  Measuring residual stress and its influence on properties of porous ZrO2/(ZrO2+Ni) ceramics , 2015 .

[5]  D. Fang,et al.  Design and fabrication of porous ZrO2/(ZrO2 + Ni) sandwich ceramics with low thermal conductivity and high strength , 2014 .

[6]  Chunsheng Lu,et al.  Finite Element Simulation on Thermal Fatigue of a Turbine Blade with Thermal Barrier Coatings , 2014 .

[7]  Hui-li Wang,et al.  Fatigue performance analysis of frictional type high strength bolts of overlapped joints , 2013 .

[8]  Wenqiang Zhang,et al.  Finite element simulation of stress distribution and development of Cf/SiC ceramic–matrix composite coated with single layer SiC coating during thermal shock , 2013 .

[9]  H. Hu,et al.  Design, preparation and properties of online-joints of C/SiC–C/SiC with pins , 2013 .

[10]  O. Sayman,et al.  Failure analysis of mechanically fastened glass fiber/epoxy composite joints under thermal effects , 2013 .

[11]  B. Zuccarello,et al.  Toward a design method for metal-composite co-cured joints based on the G-SIFs , 2013 .

[12]  H. Hu,et al.  Preparation and mechanical properties of C/SiC nuts and bolts , 2012 .

[13]  Erik P. A. M. Bakkers,et al.  Position-controlled [100] InP nanowire arrays , 2012 .

[14]  Paolo Navaretti,et al.  Thermal resistance reduction in high power superluminescent diodes by using active multi-mode interferometer , 2012 .

[15]  B. Serier,et al.  Numerical analysis of the effect of thermal residual stresses on the performances of bonded composite repairs in aircraft structures , 2011 .

[16]  S. Du,et al.  Comparison of tensile properties between NiCoCrAl/YSZ microlaminates and the monolithic NiCoCrAl foil fabricated by EB-PVD , 2009 .

[17]  Yong Jiang,et al.  Application of functionally graded interlayer on reducing the residual stress discontinuities at interfaces within a plasma-sprayed thermal barrier coating , 2007 .

[18]  A. Waas,et al.  Thermomechanical Behavior of Damaged TPS Including Hypersonic Flow Effects , 2006 .

[19]  Gary L. Kinzel,et al.  Reduction of Stress Concentration in Bolt-Nut Connectors , 2006 .

[20]  Sung-hoon Ahn,et al.  Effect of functionally graded material (FGM) layers on the residual stress of polytypoidally joined Si3N4–Al2O3 , 2006 .

[21]  A. Waas,et al.  Thermomechanical Analysis of a Thermal Protection System with Defects and Heat Shorts , 2006 .

[22]  Johan Ekh,et al.  Secondary Bending in Multi Fastener, Composite-to-Aluminium Single Shear Lap Joints , 2005 .

[23]  Guo‐Jun Zhang,et al.  Fabrication of Porous Ceramics with Unidirectionally Aligned Continuous Pores , 2004 .

[24]  Thomas Sattelmayer,et al.  Theoretical studies of high-temperature multilayer thermal insulations using radiation scaling , 2004 .

[25]  Jingchuan Zhu,et al.  Optimal design and fabrication of hydroxyapatite-Ti asymmetrical functionally graded biomaterial , 2003 .

[26]  F. S. Ortega,et al.  Monomer systems for the gelcasting of foams , 2002 .

[27]  Daryabeigi Kamran.  Thermal Analysis and Design of Multi-Layer Insulation for Re-Entry Aerodynamic Heating , 2001 .

[28]  T. Ohji,et al.  High-strength porous silicon nitride fabricated by the sinter-forging technique , 2001 .

[29]  T. C. H. Liu,et al.  Moment-Rotation-Temperature Characteristics of Steel/Composite Connections , 1999 .

[30]  敏雄 平井,et al.  CVD in-situ複合セラミックス , 1987 .

[31]  H. Hu,et al.  Theoretical simulation and experimental verification of C/SiC joints with pins or bolts , 2014 .

[32]  Vincent Caccese,et al.  Experimental characterization of hybrid composite-to-metal bolted joints under flexural loading , 2007 .

[33]  J. Schön,et al.  Quasi-static behaviour of composite joints with countersunk composite and metal fasteners , 2001 .

[34]  Robert O. Parmley.  Standard handbook of fastening and joining , 1977 .

[35]  W. D. Kingery,et al.  Introduction to Ceramics , 1976 .