Proposal and experimental validation of the electrophoretic Coulter method for analyzing microparticles and biological cells

Abstract Zeta potential measurement is one of the simplest methods for analyzing the electrical surface properties of microparticles and biological cells in a solution. The authors propose a new methodology for simultaneous measurement of the number, size and zeta potential of different specimens in a microchannel, referred to as the electrophoretic Coulter (EC) method. First, a microchannel is fabricated using soft lithography, a small amount of a specimen is injected into it, and ion current modulation through the microchannel is measured while a DC electric field is applied. The results are then compared with those obtained using the conventional methods involving dynamic light scattering (DLS) method and microscopy. The results of the EC method show good agreement with those of the conventional approaches. Accordingly, the technique enables high-throughput analysis of different specimens including nano materials and biomolecules using a micro/nanochannel, thereby significantly contributing to the field of bio-nano fusion research.

[1]  S. Harding,et al.  Static Light Scattering Studies on Xanthan in Aqueous Solutions , 1996 .

[2]  Michael A. Bevan,et al.  Light scattering characterization of polystyrene latex with and without adsorbed polymer , 2002 .

[3]  S. Digumarthy,et al.  Isolation of rare circulating tumour cells in cancer patients by microchip technology , 2007, Nature.

[4]  F. Champlin,et al.  Status of methods for assessing bacterial cell surface charge properties based on zeta potential measurements. , 2001, Journal of microbiological methods.

[5]  M. Smoluchowski.  Versuch einer mathematischen Theorie der Koagulationskinetik kolloider Lösungen , 1918 .

[6]  C. Syldatk,et al.  Zeta potential measurement as a diagnostic tool in enzyme immobilisation. , 2008, Colloids and surfaces. B, Biointerfaces.

[7]  Lydia L Sohn,et al.  Cell characterization using a protein-functionalized pore. , 2008, Lab on a chip.

[8]  Makoto Ishida,et al.  A sensor for blood cell counter using MEMS technology , 2002 .

[9]  E. Uzgiris,et al.  Study of lymphocyte and erythrocyte electrophoretic mobility by laser Doppler spectroscopy. , 1974, Analytical Biochemistry.

[10]  H. Walter,et al.  Differential electrophoretic behavior in aqueous polymer solutions of red blood cells from Alzheimer patients and from normal individuals. , 1995, Biochimica et biophysica acta.

[11]  Urs Staufer,et al.  Sensing protein molecules using nanofabricated pores , 2006 .

[12]  T. Ukai,et al.  Detection of surface immunoreactions on individual cells by electrophoretic mobility measurement in a micro-channel , 2008 .

[13]  G. Whitesides,et al.  Flexible Methods for Microfluidics , 2001 .

[14]  S. Manalis,et al.  Integrated measurement of the mass and surface charge of discrete microparticles using a suspended microchannel resonator. , 2009, Analytical chemistry.

[15]  Alan G. R. Evans,et al.  Design and fabrication of a micromachined Coulter counter , 1999 .

[16]  R. Crooks,et al.  Comparison of nanoparticle size and electrophoretic mobility measurements using a carbon-nanotube-based coulter counter, dynamic light scattering, transmission electron microscopy, and phase analysis light scattering. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[17]  Takanori Ichiki,et al.  Cell electrophoresis on a chip: what can we know from the changes in electrophoretic mobility? , 2008, Analytical and bioanalytical chemistry.

[18]  G. B. Petersen,et al.  Dynamically resizable nanometre-scale apertures for molecular sensing , 2007 .

[19]  Jay T. Groves,et al.  Detection of molecular interactions at membrane surfaces through colloid phase transitions , 2004, Nature.