Experimental investigation and improvement in heat transfer of paraffin PCM RT58 storage system to take advantage of low peak tariff rates for heat pump applications

This paper reports on an experimental energy storage system, consisting of a longitudinally finned concentric container incorporating 98 kg of RT58 phase change material (PCM) with a melting point of 60°C. The research forms part of a wider study to explore PCMs to take advantage of off-peak electricity tariffs. The experimental study results have been reported using temperature time curves, isotherm plots, trend of heat transfer coefficients based on quantitative amounts of energy charged and discharged from the PCM. Isotherm plots indicated uneven heat distribution and the charge and discharge rates of energy averaged 0.6 and 0.2 kW, respectively, prompting the need to develop a more efficient heat transfer technique to improve charge and discharge rates. Increased average inlet heat transfer fluid temperature from 60.9 to 65.9°C improved heat transfer coefficient by as much as 70% for charging and 11.3% for discharge process. Copyright , Oxford University Press.

[1]  Guoyuan Ma,et al.  Experimental study of a heat pump system with flash-tank coupled with scroll compressor , 2008 .

[2]  Mervyn Smyth,et al.  A comparison of heat transfer enhancement in a medium temperature thermal energy storage heat exchanger using fins , 2009 .

[3]  Zongjin Li,et al.  Granular phase changing composites for thermal energy storage , 2005 .

[4]  Shuangquan Shao,et al.  Performance representation of variable-speed compressor for inverter air conditioners based on experimental data , 2004 .

[5]  A. Abhat.  Low temperature latent heat thermal energy storage: Heat storage materials , 1983 .

[6]  Wang Kai,et al.  Investigation of the heat pump water heater using economizer vapor injection system and mixture of R22/R600a , 2009 .

[7]  Neil Hewitt,et al.  Defrost cycle performance for a circular shape evaporator air source heat pump , 2008 .

[8]  Sunil Kumar Singal,et al.  Review of mathematical modeling on latent heat thermal energy storage systems using phase-change material , 2008 .

[9]  Reinhard Radermacher,et al.  Field performance measurements of a heat pump desiccant unit in dehumidification mode , 2008 .

[10]  Jun Zhao,et al.  A case study of underground thermal storage in a solar-ground coupled heat pump system for residential buildings , 2009 .

[11]  Li Zhao,et al.  Theoretical and basic experimental analysis on load adjustment of geothermal heat pump systems , 2003 .

[12]  J. D. Hunt,et al.  A numerical model for a heat flux DSC: Determining heat transfer coefficients within a DSC , 2005 .

[13]  Khamid Mahkamov,et al.  Solar energy storage using phase change materials , 2007 .

[14]  Neil Hewitt,et al.  The development of a finned phase change material (PCM) storage system to take advantage of off-peak electricity tariff for improvement in cost of heat pump operation , 2010 .

[15]  Guoliang Ding,et al.  Dynamic simulation of air-to-water dual-mode heat pump with screw compressor , 2003 .

[16]  Jeong-Gun Park,et al.  The development of compressor-driven metal hydride heat pump (CDMHHP) system as an air conditioner , 2002 .

[17]  Neil Hewitt,et al.  Advanced cycles and replacement working fluids in heat pumps , 2001 .

[18]  Rita Mastrullo,et al.  Determination of the compressor optimal working conditions , 2009 .

[19]  Eric Dumont,et al.  Modelling of reciprocating and scroll compressors , 2007 .

[20]  Reinhard Radermacher,et al.  Thermodynamic and heat transfer implications of working fluid mixtures in Rankine cycles , 1989 .

[21]  J. Long,et al.  Numerical and experimental study on heat pump water heater with PCM for thermal storage , 2008 .

[22]  Tarek Abdel-Salam,et al.  Two-stage direct expansion solar-assisted heat pump for high temperature applications , 2009 .

[23]  Francisco J. Batlles,et al.  Integration of the solar thermal energy in the construction: Analysis of the solar-assisted air-conditioning system installed in CIESOL building , 2009 .

[24]  R. Radermacher,et al.  Methods for comparing the performance of pure and mixed refrigerants in the vapour compression cycle , 1987 .

[25]  Wang Zhiyi,et al.  Defrost improvement by heat pump refrigerant charge compensating , 2008 .

[26]  Francis Agyenim,et al.  A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS) , 2010 .

[27]  Guoyuan Ma,et al.  Exergetic optimization of a key design parameter in heat pump systems with economizer coupled with scroll compressor , 2007 .

[28]  Reinhard Radermacher,et al.  Calculation of the performance of vapour compression heat pumps with solution circuits using the mixture R22-DEGDME , 1986 .

[29]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[30]  Satoru Okamoto.  A heat pump system with a latent heat storage utilizing seawater installed in an aquarium , 2006 .

[31]  N. Hewitt,et al.  The replacement of CFCS in refrigeration equipment by environmentally benign alternatives , 1997 .