Discrete element modelling (DEM) input parameters: understanding their impact on model predictions using statistical analysis

[1]  Chuan-Yu Wu,et al.  DEM simulations of die filling during pharmaceutical tabletting , 2008 .

[2]  Jonas Sjöblom,et al.  Parameter estimation in heterogeneous catalysis , 2009 .

[3]  Paul W. Cleary,et al.  DEM modelling of industrial granular flows: 3D case studies and the effect of particle shape on hopper discharge , 2002 .

[4]  François Bertrand,et al.  Discrete element simulation of particle mixing and segregation in a tetrapodal blender , 2014, Comput. Chem. Eng..

[5]  Andy Ingram,et al.  Developing Mechanistic Understanding of Granular Behaviour in Complex Moving Geometry using the Discrete Element Method. Part A: Measurement and Reconstruction of Turbula Mixer Motion using Positron Emission Particle Tracking , 2010 .

[6]  Bruno C. Hancock,et al.  An implementation of granular dynamics for simulating frictional elastic particles based on the DL_POLY code , 2005, Comput. Phys. Commun..

[7]  Jonas Jansson.  Studies of Catalytic Low-Temperature CO Oxidation over Cobalt Oxide and Related Transition Metal Oxides , 2002 .

[8]  M. Marigo,et al.  Discrete Element Method (DEM) for Industrial Applications: Comments on Calibration and Validation for the Modelling of Cylindrical Pellets , 2015 .

[9]  D. Marquardt.  An Algorithm for Least-Squares Estimation of Nonlinear Parameters , 1963 .

[10]  Ali Hassanpour,et al.  Single and bulk compressions of soft granules: Experimental study and DEM evaluation , 2005 .

[11]  J. Bao,et al.  Numerical simulation of particle dynamics in different flow regimes in a rotating drum , 2007 .

[12]  Peter P. Valko,et al.  Principal component analysis of kinetic models , 1985 .

[13]  Colin Thornton,et al.  Numerical simulation of the impact fracture and fragmentation of agglomerates , 1996 .

[14]  Ronald M. Aarts,et al.  Efficient tracking of the cross-correlation coefficient , 2002, IEEE Trans. Speech Audio Process..

[15]  Hans J. Herrmann,et al.  Discrete element simulations of dense packings and heaps made of spherical and non-spherical particles , 2000 .

[16]  G. Alderborn,et al.  Flowability of surface modified pharmaceutical granules: A comparative experimental and numerical study. , 2011, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

[17]  H. Hertz.  Ueber die Berührung fester elastischer Körper. , 1882 .

[18]  Michael H. Moys,et al.  Measurement of impact behaviour between balls and walls in grinding mills , 2003 .

[19]  Dionisios G. Vlachos,et al.  Is the water–gas shift reaction on Pt simple?: Computer-aided microkinetic model reduction, lumped rate expression, and rate-determining step , 2005 .

[20]  Michael Thompson,et al.  Modelling the solids inflow and solids conveying of single-screw extruders using the discrete element method , 2005 .

[21]  Sung Joon Moon,et al.  Role of friction in pattern formation in oscillated granular layers. , 2003, Physical review. E, Statistical, nonlinear, and soft matter physics.

[22]  R. Jones,et al.  From Single Particle AFM Studies of Adhesion and Friction to Bulk Flow: Forging the Links , 2003 .

[23]  Raymond D. Mindlin,et al.  Compliance of elastic bodies in contact , 1949 .

[24]  Aibing Yu,et al.  A simulation study of the effects of dynamic variables on the packing of spheres , 2001 .

[25]  C. Thornton,et al.  Applications of Theoretical Contact Mechanics to Solid Particle System Simulation , 1988 .

[26]  C. Roberts,et al.  Characterization of Drug Particle Surface Energetics and Young’s Modulus by Atomic Force Microscopy and Inverse Gas Chromatography , 2005, Pharmaceutical Research.

[27]  C. Kloss,et al.  Models, algorithms and validation for opensource DEM and CFD-DEM , 2012 .

[28]  Christophe L. Martin,et al.  Study of the cold compaction of composite powders by the discrete element method , 2003 .

[29]  Paul W. Cleary,et al.  Prediction of screw conveyor performance using the Discrete Element Method (DEM) , 2009 .

[30]  Rimantas Kačianauskas,et al.  COMPACTING OF PARTICLES FOR BIAXIAL COMPRESSION TEST BY THE DISCRETE ELEMENT METHOD , 2006 .

[31]  M. Kamlah,et al.  A novel and simple approach for characterizing the Young’s modulus of single particles in a soft matrix by nanoindentation , 2012 .

[32]  Jidong Zhao,et al.  Numerical modeling of fluid-particle interaction in granular media , 2013 .

[33]  Jian Fei Chen,et al.  Assessment of rolling resistance models in discrete element simulations , 2011 .

[34]  Bruno C. Hancock,et al.  Predicting discharge dynamics from a rectangular hopper using the discrete element method (DEM) , 2008 .

[35]  Hertz.  On the Contact of Elastic Solids , 1882 .

[36]  Colin Thornton,et al.  Impact breakage of spherical, cuboidal and cylindrical agglomerates , 2010 .

[37]  Jin Y. Ooi,et al.  Establishing predictive capabilities of DEM – Verification and validation for complex granular processes , 2013 .

[38]  G. Lodewijks,et al.  DEM speedup: Stiffness effects on behavior of bulk material , 2014 .

[39]  Marianthi G. Ierapetritou,et al.  Discrete element reduced‐order modeling of dynamic particulate systems , 2014 .

[40]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[41]  D. Vlachos,et al.  Parameter Optimization of Molecular Models: Application to Surface Kinetics , 2003 .

[42]  Jennifer S. Curtis,et al.  Predicting the flow mode from hoppers using the discrete element method , 2009 .

[43]  Yves Schuurman,et al.  Kinetic modelling of CO conversion over a Cu/ceria catalyst , 2007 .

[44]  Aibing Yu,et al.  Steady-state granular flow in a 3D cylindrical hopper with flat bottom: macroscopic analysis , 2005 .

[45]  Fernando J. Muzzio,et al.  A study of the mixing and segregation mechanisms in the Bohle Tote blender via DEM simulations , 2006 .

[46]  Ali Hassanpour,et al.  Distinct element analysis and experimental evaluation of the Heckel analysis of bulk powder compression , 2004 .

[47]  S. Wilkinson.  Reaction kinetics in formulated industrial catalysts , 2014 .

[48]  Aibing Yu,et al.  Flow characteristics and discharge rate of ellipsoidal particles in a flat bottom hopper , 2014 .

[49]  Jonas Sjöblom,et al.  New approach for microkinetic mean-field modelling using latent variables , 2007, Comput. Chem. Eng..

[50]  M. Marigo,et al.  How Good is Your Model , 2015 .

[51]  C. Thornton,et al.  A comparison of discrete element simulations and experiments for ‘sandpiles’ composed of spherical particles , 2005 .

[52]  Michele Marigo,et al.  Developing mechanistic understanding of granular behaviour in complex moving geometry using the Discrete Element Method: Part B: Investigation of flow and mixing in the Turbula® mixer , 2011 .

[53]  Balaji Prabhu,et al.  Microstructural And Mechanical Characterization Of Al-al2o3 Nanocomposites Synthesized By High-energy Milling , 2005 .

[54]  Colin Thornton,et al.  Numerical analysis of density-induced segregation during die filling , 2010 .

[55]  Paul Zulli,et al.  An experimental and numerical study of the angle of repose of coarse spheres , 2002 .

[56]  James Bowen,et al.  Relationship between single and bulk mechanical properties for zeolite ZSM5 spray-dried particles , 2014 .