Performance evaluation of Al6061-graphene nanocomposites surface engineered by a novel multiple microchannel reinforcement approach in friction stir processing

[1]  Abhishek Sharma,et al.  A comprehensive review on the dispersion and survivability issues of carbon nanotubes in Al/CNT nanocomposites fabricated via friction stir processing , 2021, Carbon Letters.

[2]  Minjie Song,et al.  Effects of laser cladding on crack resistance improvement for aluminum alloy used in aircraft skin , 2021 .

[3]  Abhishek Sharma,et al.  Influence of reinforcement incorporation approach on mechanical and tribological properties of AA6061- CNT nanocomposite fabricated via FSP , 2020 .

[4]  Jogender Singh,et al.  Mechanical and tribological characterization of industrial wastes reinforced aluminum alloy composites fabricated via friction stir processing , 2020, Journal of Alloys and Compounds.

[5]  M. Gürbüz,et al.  Microstructure and wear behaviour of graphene–$$\hbox {Si}_{\mathrm {3}}\hbox {N}_{\mathrm {4}}$$ binary particle-reinforced aluminium hybrid composites , 2020, Bulletin of Materials Science.

[6]  M. Saravanan,et al.  Effect of graphene addition on the mechanical characteristics of AA7075 aluminium nanocomposites , 2020, Carbon Letters.

[7]  H. Liao,et al.  Wear resistance of graphene nano-platelets (GNPs) reinforced AlSi10Mg matrix composite prepared by SLM , 2020 .

[8]  Surjya K. Pal,et al.  Friction stir lap welding of AA6061 aluminium alloy with a graphene interlayer , 2020 .

[9]  M. Şenel.  Microstructure and wear behaviour of graphene–Si3N4 binary particle-reinforced aluminium hybrid composites , 2020 .

[10]  Abhishek Sharma,et al.  Fabrication of bulk aluminum-graphene nanocomposite through friction stir alloying , 2020, Journal of Composite Materials.

[11]  R. P. Mahto,et al.  Surface alteration of aluminium alloy by an exfoliated graphitic tribolayer during friction surfacing using a consumable graphite rich tool , 2019, Surface Topography: Metrology and Properties.

[12]  Abhishek Sharma,et al.  A comparative study on microstructural evolution and surface properties of graphene/CNT reinforced Al6061−SiC hybrid surface composite fabricated via friction stir processing , 2019, Transactions of Nonferrous Metals Society of China.

[13]  Abhishek Sharma,et al.  Effect of exfoliated few-layered graphene on corrosion and mechanical behaviour of the graphitized Al–SiC surface composite fabricated by FSP , 2019, Bulletin of Materials Science.

[14]  Abhishek Sharma,et al.  Surface modification of Al6061-SiC surface composite through impregnation of graphene, graphite & carbon nanotubes via FSP: A tribological study , 2019, Surface and Coatings Technology.

[15]  B. Sunil,et al.  Magnesium/fish bone derived hydroxyapatite composites by friction stir processing: studies on mechanical behaviour and corrosion resistance , 2019, Bulletin of Materials Science.

[16]  C. Jacob,et al.  Substrate free synthesis of graphene nanoflakes by atmospheric pressure chemical vapour deposition using Ni powder as a catalyst , 2019, Bulletin of Materials Science.

[17]  Zhengyi Jiang,et al.  Graphene encapsulated SiC nanoparticles as tribology-favoured nanofillers in aluminium composite , 2019, Composites Part B: Engineering.

[18]  D. Almonti,et al.  Improvement of thermal properties of micro head engine electroplated by graphene: experimental and thermal simulation , 2019, Materials and Manufacturing Processes.

[19]  A. Heidarzadeh,et al.  Influence of multi-pass FSP on the microstructure, mechanical properties and tribological characterization of Al/B4C composite fabricated by accumulative roll bonding (ARB) , 2019, Surface and Coatings Technology.

[20]  Zhengyi Jiang,et al.  Effect of graphene on the tribolayer of aluminum matrix composite during dry sliding wear , 2019, Surface and Coatings Technology.

[21]  Surjya K. Pal,et al.  Effect of multiple micro channel reinforcement filling strategy on Al6061-graphene nanocomposite fabricated through friction stir processing , 2019, Journal of Manufacturing Processes.

[22]  A. Varghese,et al.  Remediation of heavy metals and dyes from wastewater using cellulose-based adsorbents , 2018, Environmental Chemistry Letters.

[23]  M. B. Kiran,et al.  Investigation of friction stir processing effect on AA 2014-T6 , 2018, Materials and Manufacturing Processes.

[24]  Abhishek Sharma,et al.  Particle size and shape effects on the surface mechanical properties of aluminium coated with carbonaceous materials , 2018, Journal of Composite Materials.

[25]  A. N. Siddiquee,et al.  Multipass FSP on AA6063-T6 Al: Strategy to fabricate surface composites , 2018 .

[26]  Surjya K. Pal,et al.  Friction stir processing of Al6061-SiC-graphite hybrid surface composites , 2018 .

[27]  Abhishek Kumar,et al.  Strategical parametric investigation on manufacturing of Al–Mg–Zn–Cu alloy surface composites using FSP , 2018 .

[28]  Surjya K. Pal,et al.  Surface modification of Al6061 by graphene impregnation through a powder metallurgy assisted friction surfacing , 2018 .

[29]  Bao Wang,et al.  Preparation and tribological properties of homogeneously dispersed graphene-reinforced aluminium matrix composites , 2018 .

[30]  A. N. Siddiquee,et al.  Distribution of reinforcement particles in surface composite fabrication via friction stir processing: Suitable strategy , 2018 .

[31]  A. Gerlich,et al.  Effects of graphene nano-platelets (GNPs) on the microstructural characteristics and textural development of an Al-Mg alloy during friction-stir processing , 2018 .

[32]  Julio Blanco Fernández,et al.  Tribological Behavior of AA1050H24-Graphene Nanocomposite Obtained by Friction Stir Processing , 2018 .

[33]  M. Anthony Xavior,et al.  Encapsulation and microwave hybrid processing of Al 6061–Graphene–SiC composites , 2018 .

[34]  M. A. Xavior,et al.  Encapsulation and microwave hybrid processing of Al 6061–Graphene–SiC composites , 2018 .

[35]  Julio Blanco Fernández,et al.  Tribological Behavior of AA 1050 H 24-Graphene Nanocomposite Obtained by Friction Stir Processing , 2018 .

[36]  K. R. Ravi,et al.  Microstructural evolution in ultrafine grained Al-Graphite composite synthesized via combined use of ultrasonic treatment and friction stir processing , 2017 .

[37]  M. Anthony Xavior,et al.  Effect of graphene addition and tribological performance of Al 6061/graphene flake composite , 2017 .

[38]  P. Derosa,et al.  The role of agglomeration in the conductivity of carbon nanotube composites near percolation , 2017 .

[39]  Abhishek Sharma,et al.  Surface modification of aluminium by graphene impregnation , 2017 .

[40]  J. Ramkumar,et al.  Effect of carbonaceous reinforcements on the mechanical and tribological properties of friction stir processed Al6061 alloy , 2016 .

[41]  Pradeep L. Menezes,et al.  Tribological performance of self-lubricating aluminum matrix nanocomposites: Role of graphene nanoplatelets , 2016 .

[42]  M. A. Xavior,et al.  Fatigue and Wear Behavior of Al6061–Graphene Composites Synthesized by Powder Metallurgy , 2016, Transactions of the Indian Institute of Metals.

[43]  S. Mukherjee,et al.  Titanium nitride deposition on aluminium for adhesion promotion , 2016 .

[44]  Wenzheng Zhai,et al.  Tribological Behavior of NiAl–1.5 wt% Graphene Composite Under Different Velocities , 2014 .

[45]  A. Gerlich,et al.  Friction stir processing of Al/SiC composites fabricated by powder metallurgy , 2013 .

[46]  B. Xiao,et al.  Formation mechanism of in situ Al3Ti in Al matrix during hot pressing and subsequent friction stir processing , 2011 .

[47]  F. Karimzadeh,et al.  Novel artificial neural network model for evaluating hardness of stir zone of submerge friction stir processed Al 6061-T6 plate , 2011 .

[48]  G. Faraji,et al.  Producing Ultrafine-Grained AZ91 from As-Cast AZ91 by FSP , 2010 .

[49]  Yufeng Sun,et al.  Effect of gap on FSW joint formation and development of friction powder processing , 2010 .

[50]  K. Nogi,et al.  Fullerene/A5083 composites fabricated by material flow during friction stir processing , 2007 .

[51]  K. Nogi,et al.  Fullerene / A 5083 composites fabricated by material flow during friction stir processing , 2007 .

[52]  Y. Morisada,et al.  Nanocrystallized magnesium alloy – uniform dispersion of C60 molecules , 2006 .

[53]  Y. Morisada,et al.  Effect of friction stir processing with SiC particles on microstructure and hardness of AZ31 , 2006 .

[54]  E. S. Puchi-Cabrera,et al.  Fatigue behaviour of 7075-T6 aluminium alloy coated with WC–12Co alloy deposited by plasma spray , 2006 .

[55]  Y. Morisada,et al.  MWCNTs/AZ31 surface composites fabricated by friction stir processing , 2006 .

[56]  A. Mukherjee,et al.  High Strain Rate Superplasticity in a Friction Stir Processed 7075 Al Alloy , 1999 .