Design and validation of high-precision wireless strain sensors for structural health monitoring of steel structures

Due to their cost-effectiveness and ease of installation, smart wireless sensors have received considerable recent attention for structural health monitoring of civil infrastructure. Though various wireless smart sensor networks (WSSN) have been successfully implemented for full-scale structural health monitoring (SHM) applications, monitoring of low-level ambient strain still remains a challenging problem for wireless smart sensors (WSS) due to A/D converter resolution, inherent circuit noise, and the need for automatic operation. In this paper, the design and validation of high-precision strain sensor board for Imote2 WSS platform and its application to SHM of a cable-stayed bridge are presented. By accurate and automated balancing the Wheatstone bridge, signal amplification of up to 2507-times can be obtained. Temperature compensation and shunt calibration are implemented. In addition to traditional foil-type strain gages, the sensor board has been designed to accommodate a friction-type magnet strain sensor, facilitating fast and easy deployment. The sensor board has been calibrated using lab-scale tests, and then deployed on a full-scale cable-stayed bridge to verify its performance.

[1]  Gul Agha,et al.  Flexible smart sensor framework for autonomous structural health monitoring , 2010 .

[2]  Sreenivas Alampalli,et al.  Estimating Fatigue Life of Bridge Components Using Measured Strains , 2006 .

[3]  Hojung Cha,et al.  Structural Health Monitoring system based on strain gauge enabled wireless sensor nodes , 2008, 2008 5th International Conference on Networked Sensing Systems.

[4]  G. Agha,et al.  Wireless Strain Sensor Development for Civil Infrastructure , 2004 .

[5]  Gul Agha,et al.  Structural health monitoring of a cable-stayed bridge using smart sensor technology: deployment and evaluation , 2010 .

[6]  Matthew J. Whelan,et al.  Design of a Robust, High-rate Wireless Sensor Network for Static and Dynamic Structural Monitoring , 2009 .

[7]  Nam-Sik Kim,et al.  Estimation of Displacement Response from FBG Strain Sensors Using Empirical Mode Decomposition Technique , 2012 .

[8]  Jerome P. Lynch,et al.  Design of a Wireless Sensor for Scalable Distributed In- Network Computation in a Structural Health Monitoring System , 2006 .

[9]  Shinae Jang,et al.  Structural health monitoring of a cable-stayed bridge using wireless smart sensor technology: data analyses , 2010 .

[10]  Mike Fraser,et al.  Automatic Vehicle Type Classification Using Strain Gauge Sensors , 2007, Fifth Annual IEEE International Conference on Pervasive Computing and Communications Workshops (PerComW'07).

[11]  Jian Li,et al.  Hybrid wireless smart sensor network for full-scale structural health monitoring of a cable-stayed bridge , 2011, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[12]  Jerome P. Lynch,et al.  FATIGUE LIFE MONITORING OF METALLIC STRUCTURES BY DECENTRALIZED RAINFLOW COUNTING EMBEDDED IN A WIRELESS SENSOR NETWORK , 2010 .

[13]  Jerome P. Lynch,et al.  Long-term assessment of an autonomous wireless structural health monitoring system at the new Carquinez Suspension Bridge , 2011, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[14]  Lennart Elfgren,et al.  Event-based strain monitoring on a railway bridge with a wireless sensor network , 2009 .