Analysis and Monitoring Results of a Building Integrated Photovoltaic Façade Using PV Ceramic Tiles in Taiwan

Single-crystal silicon-based solar cells laminated with tempered-glass and ceramic tiles for use in a building’s facade have been developed. The optical, thermal, and electrical properties of the proposed PV module are first evaluated, and then a wind-resistance test is carried out to evaluate the feasibility of installing it in Taiwan. The electrical and deflection characteristics of the proposed PV module did not change significantly after a 50 thermal cycling test and a 200-hour humidity-freeze test, based on IEC 61215 and a wind-resistance test. Finally, the electrical power generation ability of the proposed BIPV system with 1 kWp electrical power capacity was examined. Building information modeling software tools were used to simulate the BIPV system and carry out the energy analysis. The simulation results show a very consistent trend with regard to the actual monthly electricity production of the BIPV system designed in this work. The BIPV system was able to produce an accumulative electrical power of 185 kWh during the 6-month experimental period. In addition, the exterior temperature of the demonstration house was about 10°C lower than the surface of the BIPV system, which could reduce indoor temperature.

[1]  Lingyun Liu,et al.  Analytical performance monitoring of a 142.5kWp grid-connected rooftop BIPV system in Singapore , 2012 .

[2]  Ying Huang,et al.  Building-integrated photovoltaics (BIPV) in architectural design in China , 2011 .

[3]  M. J. Palacios,et al.  A test method to evaluate the thermal performance of window glazings , 2000 .

[4]  Kwang Ho Lee,et al.  An experimental study on the annual surface temperature characteristics of amorphous silicon BIPV window , 2013 .

[5]  Kasun Hewage,et al.  Building Information Modeling (BIM) partnering framework for public construction projects , 2013 .

[6]  Chen,et al.  Self-Power Consumption Research with the Thermal Effects and Optical Properties of the HCRI-BIPV Window System , 2012 .

[7]  Jeong Tai Kim,et al.  Optimization of Photovoltaic Integrated Shading Devices , 2010 .

[8]  Jong-ho Yoon,et al.  Practical application of building integrated photovoltaic (BIPV) system using transparent amorphous silicon thin-film PV module , 2011 .

[9]  Ricardo Rüther,et al.  The potential of building-integrated (BIPV) and building-applied photovoltaics (BAPV) in single-family, urban residences at low latitudes in Brazil , 2012 .

[10]  Marco Raugei,et al.  Life cycle impacts and costs of photovoltaic systems: Current state of the art and future outlooks , 2009 .

[11]  E. Centurioni,et al.  Thin-film solar cells on commercial ceramic tiles , 2009 .

[12]  Wolfram Sparber,et al.  Analysis and Monitoring Results of a BIPV System in Northern Italy , 2010 .

[13]  Gabrial Anandarajah,et al.  Pathways to a Low-Carbon Economy , 2009 .

[14]  Rosenberg J. Romero,et al.  Experimental thermodynamic evaluation for a single stage heat transformer prototype build with commercial PHEs , 2015 .