Systematic characterization of degas-driven flow for poly(dimethylsiloxane) microfluidic devices.

Degas-driven flow is a novel phenomenon used to propel fluids in poly(dimethylsiloxane) (PDMS)-based microfluidic devices without requiring any external power. This method takes advantage of the inherently high porosity and air solubility of PDMS by removing air molecules from the bulk PDMS before initiating the flow. The dynamics of degas-driven flow are dependent on the channel and device geometries and are highly sensitive to temporal parameters. These dependencies have not been fully characterized, hindering broad use of degas-driven flow as a microfluidic pumping mechanism. Here, we characterize, for the first time, the effect of various parameters on the dynamics of degas-driven flow, including channel geometry, PDMS thickness, PDMS exposure area, vacuum degassing time, and idle time at atmospheric pressure before loading. We investigate the effect of these parameters on flow velocity as well as channel fill time for the degas-driven flow process. Using our devices, we achieved reproducible flow with a standard deviation of less than 8% for flow velocity, as well as maximum flow rates of up to 3 nL∕s and mean flow rates of approximately 1-1.5 nL∕s. Parameters such as channel surface area and PDMS chip exposure area were found to have negligible impact on degas-driven flow dynamics, whereas channel cross-sectional area, degas time, PDMS thickness, and idle time were found to have a larger impact. In addition, we develop a physical model that can predict mean flow velocities within 6% of experimental values and can be used as a tool for future design of PDMS-based microfluidic devices that utilize degas-driven flow.

[1]  T. Merkel,et al.  Gas sorption, diffusion, and permeation in poly(dimethylsiloxane) , 2000 .

[2]  Ute Drechsler,et al.  Autonomous microfluidic capillary system. , 2002, Analytical chemistry.

[3]  David J Beebe,et al.  A passive pumping method for microfluidic devices. , 2002, Lab on a chip.

[4]  Jan Eijkel,et al.  Evaporation driven pumping for chromatography application. , 2002, Lab on a chip.

[5]  P. Cremer,et al.  Microfluidic diffusion diluter: bulging of PDMS microchannels under pressure-driven flow , 2003 .

[6]  G. Whitesides,et al.  Microfluidic devices fabricated in Poly(dimethylsiloxane) for biological studies , 2003, Electrophoresis.

[7]  Wei Wang,et al.  A microfluidic device based on gravity and electric force driving for flow cytometry and fluorescence activated cell sorting. , 2004, Lab on a chip.

[8]  V. Studer,et al.  An integrated AC electrokinetic pump in a microfluidic loop for fast and tunable flow control. , 2004, The Analyst.

[9]  Kae Sato,et al.  Power-free poly(dimethylsiloxane) microfluidic devices for gold nanoparticle-based DNA analysis. , 2004, Lab on a chip.

[10]  Heinz Schmid,et al.  Continuous flow in open microfluidics using controlled evaporation. , 2005, Lab on a chip.

[11]  Mizuo Maeda,et al.  Power-free sequential injection for microchip immunoassay toward point-of-care testing. , 2006, Lab on a chip.

[12]  A. Manz,et al.  Micro total analysis systems. Latest advancements and trends. , 2006, Analytical chemistry.

[13]  Yasunobu Sato,et al.  Surface plasmon resonance imaging on a microchip for detection of DNA-modified gold nanoparticles deposited onto the surface in a non-cross-linking configuration. , 2006, Analytical biochemistry.

[14]  S. Takayama,et al.  Gravity-driven microfluidic particle sorting device with hydrodynamic separation amplification. , 2007, Analytical chemistry.

[15]  Mizuo Maeda,et al.  Immunoassay on a power-free microchip with laminar flow-assisted dendritic amplification. , 2007, Analytical chemistry.

[16]  Detection of non-cross-linking interaction between DNA-modified gold nanoparticles and a DNA-modified flat gold surface using surface plasmon resonance imaging on a microchip. , 2008, Colloids and surfaces. B, Biointerfaces.

[17]  Q. Ouyang,et al.  A fast cell loading and high-throughput microfluidic system for long-term cell culture in zero-flow environments. , 2008, Biotechnology and bioengineering.

[18]  Luke P. Lee,et al.  Stand-alone self-powered integrated microfluidic blood analysis system (SIMBAS). , 2011, Lab on a chip.