Formation and Characterization of Inkjet-Printed Nanosilver Lines on Plasma-Treated Glass Substrates

In this study, we investigated geometrical characteristics of the inkjet-printed lines with non-zero receding contact angle (CA) on plasma-treated substrates in terms of various printing variables and analyzed the fluidic behavior and hydrodynamic instability involved in the line formation process. The printing variables included surface energy, droplet overlap ratio, printing frequency, a number of ink droplets, substrate temperature and printing procedures. For the study, a colloidal suspension containing 56 wt % silver nanoparticles in tetradecane solvent was used as a printing ink. It has electrical resistivity of 4.7 μΩ·cm. The substrates were obtained by performing a plasma enhanced chemical vapor deposition (PECVD) process with C4F8 and O2 under various treatment conditions. As results of the experiments, the surface shape and pattern of the inkjet-printed Ag lines were dominantly influenced by the surface energy of the substrates, among the printing variables. Accordingly even when the receding CA was non-zero, bulging instability of the lines occurred forming separate circular patterns or regular bulges connected by ridges. It is a new finding of this study, which is completely different with the bulging instability of inkjet lines with zero receding CA specified by previous researches. The bulging instability decreased by increasing surface temperature of the substrates or employing interlacing procedure instead of continuous procedure for printing. The interlacing procedure also was advantageous to fabricate thick and narrow Ag lines with well-defined shape through overprinting on a hydrophobic substrate. These results will contribute greatly to not only the production of various printed electronics containing high-aspect-ratio structures but also the improvement of working performance of the devices.

[1]  S. Jang,et al.  Electrical sintering characteristics of inkjet-printed conductive Ag lines on a paper substrate , 2013 .

[2]  H. Fuchs,et al.  In Situ Surface‐Modification‐Induced Superhydrophobic Patterns with Reversible Wettability and Adhesion , 2013, Advanced materials.

[3]  U. Schubert,et al.  Inkjet Printing of Polymers: State of the Art and Future Developments , 2004 .

[4]  Vivek Subramanian,et al.  Methodology for inkjet printing of partially wetting films. , 2010, Langmuir : the ACS journal of surfaces and colloids.

[5]  Je Hoon Oh,et al.  High-resolution electrohydrodynamic printing of silver nanoparticle ink via commercial hypodermic needles , 2015 .

[6]  S. Jang,et al.  Influence of Processing Conditions and Material Properties on Electrohydrodynamic Direct Patterning of a Polymer Solution , 2015, Journal of Electronic Materials.

[7]  M Paturzo,et al.  Dispensing nano-pico droplets and liquid patterning by pyroelectrodynamic shooting. , 2010, Nature nanotechnology.

[8]  P. Calvert Inkjet Printing for Materials and Devices , 2001 .

[9]  Je Hoon Oh,et al.  Geometrical characterization of inkjet-printed conductive lines of nanosilver suspensions on a polymer substrate , 2010 .

[10]  Je Hoon Oh,et al.  Influence of C4F8 plasma treatment on size control of inkjet-printed dots on a flexible substrate , 2010 .

[11]  Hiromichi Kataura,et al.  Inkjet printing of single-walled carbon nanotube thin-film transistors patterned by surface modification , 2011 .

[12]  K. Guarini,et al.  High-Resolution Inkjet Printing of All-Polymer Transistor Circuits , 2009 .

[13]  Tim C. Claypole,et al.  Flexographic printing of ultra-thin semiconductor polymer layers , 2016 .

[14]  H W Li,et al.  Dewetting of conducting polymer inkjet droplets on patterned surfaces , 2004, Nature materials.

[15]  A. Chiolerio,et al.  Silver nanoparticle ink technology: state of the art , 2016, Nanotechnology, science and applications.

[16]  Jonathan Stringer,et al.  Limits to feature size and resolution in ink jet printing , 2009 .

[17]  J. Oh,et al.  Control of the crystalline structure of inkjet-printed semiconductor layers using overlap condition and surface wettability , 2015 .

[18]  M. Desmulliez,et al.  Inkjet printing of conductive materials: a review , 2012 .

[19]  Je Hoon Oh,et al.  Solvent and substrate effects on inkjet-printed dots and lines of silver nanoparticle colloids , 2011 .

[20]  G. Jabbour,et al.  Inkjet Printing—Process and Its Applications , 2010, Advanced materials.

[21]  P. Duineveld,et al.  The stability of ink-jet printed lines of liquid with zero receding contact angle on a homogeneous substrate , 2003, Journal of Fluid Mechanics.

[22]  Je Hoon Oh,et al.  All-inkjet-printed electrical components and circuit fabrication on a plastic substrate , 2012 .

[23]  Kilwon Cho,et al.  Evaporation-induced self-organization of inkjet-printed organic semiconductors on surface-modified dielectrics for high-performance organic transistors. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[24]  Alessandro Chiolerio,et al.  Inkjet-printed PEDOT:PSS electrodes on plasma-modified PDMS nanocomposites: Quantifying plasma treatment hardness , 2014 .

[25]  V. Subramanian,et al.  Inkjet-printed line morphologies and temperature control of the coffee ring effect. , 2008, Langmuir : the ACS journal of surfaces and colloids.

[26]  Y. S. Kim,et al.  Effects of plasma surface treatments on inkjet-printed feature sizes and surface characteristics , 2011 .