论文信息 - Operating temperature and distribution of a working fluid in LHP

Operating temperature and distribution of a working fluid in LHP

Abstract One of the main factors that influence the operating temperature of a loop heat pipe (LHP) is the distribution of a working fluid in the device. The paper presents the classification of LHP operating modes on the basis of the criterion of presence or absence of the working-fluid vapor phase in the compensation chamber (CC). It gives a description of method of calculating the LHP operating temperature for every operating mode and shows the characteristic features, advantages and disadvantages of every mode.

[1] M. Poniewski. Peculiarities of boiling heat transfer on capillary-porous coverings , 2004 .

[2] Yu. F. Maidanik,et al. Miniature loop heat pipes for electronics cooling , 2003 .

[3] Jentung Ku,et al. Operating Characteristics of Loop Heat Pipes , 1999 .

[4] Yu.F. Maydanik,et al. Loop heat pipes , 2005 .

[5] Darius Nikanpour,et al. STEADY-STATE AND TRANSIENT LOOP HEAT PIPE PERFORMANCE DURING PERIODIC HEATING CYCLES , 2004 .

[6] Yu. G. Fershtater,et al. Design and Investigation of Methods of Regulation of Loop Heat Pipes for Terrestrial and Space Applications , 1994 .

[7] Michael Pauken,et al. Performance Characterization and Model Verification of a Loop Heat Pipe , 2000 .

[8] Yu. G. Fershtater,et al. Adaptation of loop heat pipes to zero-g conditions , 1997 .

[9] Y. Maydanik,et al. Miniature loop heat pipes - a promising means for cooling electronics , 2005, The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena In Electronic Systems (IEEE Cat. No.04CH37543).