Static and dynamic electrowetting of an ionic liquid in a solid/liquid/liquid system.

A droplet of an ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate, bmim.BF(4)) is immersed in an immiscible liquid (n-hexadecane) and electrowetted on a flat Teflon AF1600-coated ITO electrode. The static contact angle decreases significantly when voltage is applied between the droplet and the electrode: from 145 degrees down to 50 degrees (with DC voltage) and 15 degrees (with AC voltage). The electrowetting curves (contact angle versus voltage) are similar to the ones obtained in other solid/liquid/vapor and solid/liquid/liquid systems: symmetric with respect to zero voltage and correctly described by Young-Lippmann equation below saturation. The reversibility is excellent and contact angle hysteresis is minimal (approximately 2 degrees). The step size used in applying the DC voltage and the polarity of the voltage are unimportant. The saturation contact angle cannot be predicted with the simple zero-interfacial tension theory. Spreading (after applying a DC voltage) and retraction (after switching off the voltage) of the droplet is monitored. The base area of the droplet varies exponentially during wetting (exponential saturation) and dewetting (exponential decay). The characteristic time is 20 ms for spreading and 35 ms for retraction (such asymmetry is not observed with water-glycerol mixtures of a similar viscosity). The spreading kinetics (dynamic contact angle versus contact line speed) can be described by the hydrodynamic model (Voinov's equation) for small contact angles and by the molecular-kinetic model (Blake's equation) for large contact angles. The role of viscous and molecular dissipation follows the scheme outlined by Brochard-Wyart and de Gennes.

[1]  R. G. Cox.  The dynamics of the spreading of liquids on a solid surface. Part 1. Viscous flow , 1986, Journal of Fluid Mechanics.

[2]  John Ralston,et al.  Contact angle saturation in electrowetting. , 2005, The journal of physical chemistry. B.

[3]  J. Ralston,et al.  Dynamics of liquid-liquid displacement. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[4]  J. Ralston,et al.  Dynamics of Wetting from an Experimental Point of View , 2008 .

[5]  C. Werner,et al.  Electrokinetic Measurements Reveal Interfacial Charge at Polymer Films Caused by Simple Electrolyte Ions , 2001 .

[6]  H. Verheijen,et al.  REVERSIBLE ELECTROWETTING AND TRAPPING OF CHARGE : MODEL AND EXPERIMENTS , 1999, cond-mat/9908328.

[7]  John Ralston,et al.  Differential Capacitance of the Electrical Double Layer in Imidazolium-Based Ionic Liquids: Influence of Potential, Cation Size, and Temperature , 2008 .

[8]  Robin D. Rogers,et al.  Ionic Liquids--Solvents of the Future? , 2003, Science.

[9]  R. Fair,et al.  An integrated digital microfluidic lab-on-a-chip for clinical diagnostics on human physiological fluids. , 2004, Lab on a chip.

[10]  Robert A. Hayes,et al.  Amorphous fluoropolymers as insulators for reversible low-voltage electrowetting , 2001 .

[11]  B. Berge,et al.  Variable focal lens controlled by an external voltage: An application of electrowetting , 2000 .

[12]  Hiroyuki Ohno,et al.  Electrochemical Aspects of Ionic Liquids: Ohno/Electrochemical Aspects of Ionic Liquids , 2005 .

[13]  Bokke J. Feenstra,et al.  52.1: A High Brightness Colour 160 PPI Reflective Display Technology Based on Electrowetting , 2004 .

[14]  S. Herminghaus,et al.  Switching liquid morphologies on linear grooves. , 2007, Langmuir.

[15]  R. Horn,et al.  Electrowetting Measurements with Mercury Showing Mercury/Mica Interfacial Energy Depends on Charging , 2004 .

[16]  B. Berge,et al.  Limiting phenomena for the spreading of water on polymer films by electrowetting , 1999 .

[17]  Behrouz Abedian,et al.  Low voltage electrowetting using thin fluoroploymer films. , 2006, Journal of colloid and interface science.

[18]  Craig Priest,et al.  Electrowetting of Aqueous Solutions of Ionic Liquid in Solid−Liquid−Liquid Systems , 2010 .

[19]  G. Evans,et al.  Assessment of hydrodynamic and molecular-kinetic models applied to the motion of the dewetting contact line between a small bubble and a solid surface , 2003 .

[20]  J. Andrade,et al.  Streaming potential investigations: Polymer thin films , 1981 .

[21]  T. Blake.  The physics of moving wetting lines. , 2006, Journal of colloid and interface science.

[22]  O. Voinov.  Hydrodynamics of wetting , 1976 .

[23]  T. Blake,et al.  The influence of solid-liquid interactions on dynamic wetting. , 2002, Advances in colloid and interface science.

[24]  Stephan Herminghaus,et al.  Dynamical instability of thin liquid films between conducting media. , 1999 .

[25]  Françoise Brochard-Wyart,et al.  Dynamics of partial wetting , 1992 .

[26]  Daniel T. Chiu,et al.  Electrowetting-Induced Droplet Movement in an Immiscible Medium , 2003 .

[27]  Franklin T. Dodge,et al.  The spreading of liquid droplets on solid surfaces , 1988 .

[28]  L. G. J. Fokkink,et al.  Fast Electrically Switchable Capillary Effects , 1998 .

[29]  Richard B. Fair,et al.  Digital microfluidics: is a true lab-on-a-chip possible? , 2007 .

[30]  John Ralston,et al.  Influence of the Electrical Double Layer in Electrowetting , 2003 .

[31]  Asim Nisar,et al.  MEMS-based micropumps in drug delivery and biomedical applications , 2008 .

[32]  G. Beni,et al.  Electrowetting switch for multimode optical fibers , 1983 .

[33]  B. J. Feenstra,et al.  Video-speed electronic paper based on electrowetting , 2003, Nature.

[34]  T. Blake,et al.  Kinetics of displacement , 1969 .

[35]  John Ralston,et al.  Electrowetting of ionic liquids. , 2006, Journal of the American Chemical Society.

[36]  Douglas R. MacFarlane,et al.  Electrodeposition from Ionic Liquids , 2008 .

[37]  B. Shapiro,et al.  Equilibrium behavior of sessile drops under surface tension, applied external fields, and material variations , 2003 .

[38]  J. Ralston,et al.  Dynamic Dewetting Regimes Explored , 2009 .

[39]  Kwan Hyoung Kang,et al.  A numerical investigation on AC electrowetting of a droplet , 2008 .

[40]  Frieder Mugele,et al.  Electrowetting-induced oil film entrapment and instability. , 2006, Physical review letters.

[41]  Behrouz Abedian,et al.  Irreversible electrowetting on thin fluoropolymer films. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[42]  B. Berge,et al.  Electrowetting of water and aqueous solutions on poly(ethylene terephthalate) insulating films , 1996 .

[43]  Bruno Berge,et al.  Investigation of effective interface potentials by electrowetting , 2002 .

[44]  Bruno Berge,et al.  Two liquids wetting and low hysteresis electrowetting on dielectric applications. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[45]  N. Churaev,et al.  Prediction of contact angles on the basis of the Frumkin-Derjaguin approach , 1995 .

[46]  Wolfgang Göpel,et al.  Competitive Electrowetting of Polymer Surfaces by Water and Decane , 2000 .

[47]  Shaun Berry,et al.  Engineering the electrocapillary behavior of electrolyte droplets on thin fluoropolymer films. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[48]  P. Gennes.  Deposition of Langmuir-Blodgett layers , 1986 .

[49]  J. Baret,et al.  Electrowetting: from basics to applications , 2005 .

[50]  Robin D. Rogers,et al.  Ionic liquids as green solvents : progress and prospects , 2003 .