Workspace Analysis for Planar and Spatial Redundant Cable Robots

This paper presents workspace analysis of planar and spatial cable robots having one or more redundant cables. The proposed approach, which is based on a variant of Bland's pivot rule, provides all poses (positions/orientations) reachable by the cable robot platform with any number of cable redundancies. By virtue of this method, there is no need to use successive determinants to compute the workspace; this results in less computation time. Additionally, another algorithm, which takes advantage of reduced row-echelon form of the system matrix, is proposed for the case of cable robots with only one redundant cable and also to include upper limit for tensions in cables as an important factor in workspace analysis of the cable robots. Simulation results are provided to show the merits of the proposed methods to compute the available static workspace of the redundant cable robots.

[1]  Pascal Lafourcade,et al.  Design of a Parallel Wire-Driven Manipulator for Wind Tunnels , 2002 .

[2]  Imme Ebert-Uphoff,et al.  Wrench-feasible workspace generation for cable-driven robots , 2006, IEEE Transactions on Robotics.

[3]  Ou Ma,et al.  Workspace Determination of General 6-d.o.f. Cable Manipulators , 2008, Adv. Robotics.

[4]  Ou Ma,et al.  Force-closure analysis of 6-DOF cable manipulators with seven or more cables , 2009, Robotica.

[5]  Paolo Gallina,et al.  3-d.o.f. Wire Driven Planar Haptic Interface , 2001, J. Intell. Robotic Syst..

[6]  Jean-Pierre Merlet,et al.  Determination of the wrench-closure workspace of 6-DOF parallel cable-driven mechanisms , 2006, ARK.

[7]  Clément Gosselin,et al.  Analysis of the wrench-closure workspace of planar parallel cable-driven mechanisms , 2006, IEEE Transactions on Robotics.

[8]  Sunil K. Agrawal,et al.  Workspace and Design Analysis of Cable-Suspended Planar Parallel Robots , 2002 .

[9]  Mustafa Shabbir Kurbanhusen,et al.  Force-closure workspace analysis of cable-driven parallel mechanisms , 2006 .

[10]  Aiguo Ming,et al.  Study on multiple degree-of-freedom positioning mechanism using wires. II: Development of a planar completely restrained positioning mechanism , 1994 .

[11]  David Avis,et al.  Solving Inequalities and Proving Farkas's Lemma Made Easy , 2002, Am. Math. Mon..

[12]  Jean-Pierre Merlet,et al.  Wrench-Feasible Workspace of Parallel Cable-Driven Mechanisms , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[13]  Imme Ebert-Uphoff,et al.  Wrench-based analysis of cable-driven robots , 2004, IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004.

[14]  Xiumin Diao,et al.  Study of 6-DOF Cable Robots for Potential Application of HIL Microgravity Contact-Dynamics Simulation , 2006 .

[15]  W. Greub.  Linear Algebra , 1981 .

[16]  Manfred Hiller,et al.  Estimating the Controllable Workspace of Tendon-Based Stewart Platforms , 2000 .

[17]  C. Gosselin,et al.  Determination of the Dynamic Workspace of Cable-Driven Planar Parallel Mechanisms , 2005 .

[18]  Ou Ma,et al.  A method of verifying force-closure condition for general cable manipulators with seven cables , 2007 .

[19]  Vijay R. Kumar,et al.  Workspaces of Cable-Actuated Parallel Manipulators , 2006 .

[20]  Imme Ebert-Uphoff,et al.  Force-feasible workspace analysis for underconstrained, point-mass cable robots , 2004, IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004.

[21]  Ou Ma,et al.  Workspace Analysis of a 6-DOF Cable Robot for Hardware-in-the-Loop Dynamic Simulation , 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[22]  James S. Albus,et al.  The NIST robocrane , 1993, J. Field Robotics.

[23]  Sunil K. Agrawal,et al.  Cable suspended robots: design, planning and control , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).