Optimization methods for 3D lithography process utilizing DMD-based maskless grayscale photolithography system

Digital Micromirror Device (DMD)-based grayscale lithography is a promising tool for three dimensional (3D) microstructuring of thick-film photoresist since it is a maskless process, provides possibility for the free-form of 3D microstructures, and therefore rapid and cost-effective microfabrication. However, process parameter determination lacks efficient optimization tool, and thus conventional look-up table (indicating the relationship between development depth and exposure dose value under a fixed development time) approach with manual try-and-error adjustment is still gold standard. In this paper, we firstly present a complete “input target-output parameters” single exposure optimization method for 3D microstructuring utilizing DMD-based grayscale lithography. This numerical optimization based on lithography simulation and sensitivity analysis can automatically optimize a combination of three process parameters for target microstructure; exposure dose pattern, a focal position, and development time. Through a series of experiments using a 20 μm thick positive photoresist, validity of the proposed optimization approach has been successfully verified. Secondly, with the purpose of further advancing accuracy and improve the uniformity of precision for the target area, a multiple exposure optimization method is proposed. The simulated results proved that the multiple exposure optimization method is a promising strategy to further improve precision for thicker photoresist structure.

[1]  W. Hsu,et al.  Fabrication of a polymer-based torsional vertical comb drive using a double-side partial exposure method , 2008 .

[2]  M. Schmid.  Principles Of Optics Electromagnetic Theory Of Propagation Interference And Diffraction Of Light , 2016 .

[3]  Masayoshi Esashi,et al.  Fabrication of three-dimensional microstructure using maskless gray-scale lithography , 2006 .

[4]  Chi Liu,et al.  Imaging simulation of maskless lithography using a DMD , 2005, SPIE/COS Photonics Asia.

[6]  R. Maeda,et al.  Maskless Lithographic Fine Patterning on Deeply Etched or Slanted Surfaces, and Grayscale Lithography, Using Newly Developed Digital Mirror Device Lithography Equipment , 2012 .

[7]  James A. Sethian,et al.  Level Set Methods and Fast Marching Methods/ J. A. Sethian , 1999 .

[8]  C. Mack.  Fundamental principles of optical lithography , 2007 .

[9]  Toshiyuki Tsuchiya,et al.  Moving mask UV lithography for three-dimensional structuring , 2007 .

[10]  Guy Voirin,et al.  One-step 3D shaping using a gray-tone mask for optical and microelectronic applications , 1994 .

[11]  Zhao-Xiang Fang,et al.  Microscopic lithography with pixelate diffraction of a digital micro-mirror device for micro-lens fabrication. , 2014, Applied optics.

[12]  James A. Sethian,et al.  Level Set Methods and Fast Marching Methods , 1999 .

[13]  Reza Ghodssi,et al.  Investigation of gray-scale technology for large area 3D silicon MEMS structures , 2003 .

[14]  J. A. Sethian,et al.  Fast Marching Methods , 1999, SIAM Rev..

[15]  O. Tabata,et al.  A three-dimensional microstructuring technique exploiting the positive photoresist property , 2010 .

[16]  R. Ghodssi,et al.  Development of a deep silicon phase Fresnel lens using Gray-scale lithography and deep reactive ion etching , 2004, Journal of Microelectromechanical Systems.

[17]  Yoshihisa Sensu,et al.  Study of proximity lithography simulations using measurements of dissolution rate and calculation of the light intensity distributions in the photoresist , 2004, SPIE Advanced Lithography.

[18]  Chris A. Mack.  Thirty years of lithography simulation , 2004, SPIE Advanced Lithography.

[19]  G. Arfken.  Mathematical Methods for Physicists , 1967 .

[20]  F. Keulen,et al.  Automatic process design for 3D thick-film grayscale photolithography , 2013, 2013 Transducers & Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS & EUROSENSORS XXVII).

[21]  罗宁宁,et al.  Fabrication of continuous relief micro-optic elements using real-time maskless lithography technique based on DMD , 2014 .