Process control strategies for flexible operation of post-combustion CO2 capture plants

Abstract With increasing penetration of intermittent renewable energy into the electricity grid, one can expect thermal power plants to be required to operate in a more dynamic fashion, with more frequent departures from design point operation. However, the application of optimal control strategies can offer solutions to these operational challenges, associated with the integration of the power plant with the capture plant. In this paper a process control strategy is developed in order to select the optimal control variables for a PCC process. In addition, economically efficient control structures for operation of a post-combustion capture process with minimum energy requirements for coal and natural gas power plant are designed. The results have shown that with an appropriate and well-tuned control strategy, it is possible to maintain critical parameters, such as the degree of CO 2 capture, at the desired set-point, even during periods of significant fluctuation in the power plant load and even if based on simple and well established control technologies, such as PID, avoids the need for more risky solutions such as adding solvent storage tanks to the process.

[1]  David Shan-Hill Wong,et al.  Plantwide control of CO2 capture by absorption and stripping using monoethanolamine solution , 2011, Proceedings of the 2011 American Control Conference.

[2]  Mai Bui,et al.  Dynamic modelling and optimisation of flexible operation in post-combustion CO2 capture plants - A review , 2014, Comput. Chem. Eng..

[3]  Ali Abbas,et al.  Dynamic modelling, identification and preliminary control analysis of an amine-based post-combustion CO2 capture pilot plant , 2016 .

[4]  Nilay Shah,et al.  Optimisation of Post-combustion CO2 Capture for Flexible Operation , 2014 .

[5]  Nilay Shah,et al.  An overview of CO2 capture technologies , 2010 .

[6]  Peter L. Douglas,et al.  On the operability of power plants with CO2 capture and storage , 2009 .

[7]  George Jackson,et al.  New reference equation of state for associating liquids , 1990 .

[8]  Nilay Shah,et al.  Dynamic modelling and analysis of an amine-based post-combustion CO2 capture absorption column , 2013 .

[9]  Jon Gibbins,et al.  Scope for reductions in the cost of CO2 capture using flue gas scrubbing with amine solvents , 2004 .

[10]  Frances E. Pereira,et al.  Transferable SAFT-VR models for the calculation of the fluid phase equilibria in reactive mixtures of carbon dioxide, water, and n-alkylamines in the context of carbon capture. , 2011, The journal of physical chemistry. B.

[11]  Eric Croiset,et al.  Dynamic modelling and control of MEA absorption processes for CO2 capture from power plants , 2014 .

[12]  O. Edenhofer,et al.  Climate change 2014 : mitigation of climate change , 2014 .

[13]  Nilay Shah,et al.  Flexible operation of solvent regeneration systems for CO2 capture processes using advanced control techniques: Towards operational cost minimisation , 2012 .

[14]  E. J. Anthony,et al.  Carbon capture and storage update , 2014 .

[15]  Luis A. Ricardez-Sandoval,et al.  Dynamic modelling of a commercial-scale CO2 capture plant integrated with a natural gas combined cycle (NGCC) power plant , 2016 .

[16]  Ali Abbas,et al.  Dynamic modelling and control strategies for flexible operation of amine-based post-combustion CO2 capture systems , 2015 .

[17]  N. Shah,et al.  The multi-period optimisation of an amine-based CO2 capture process integrated with a super-critical coal-fired power station for flexible operation , 2015, Comput. Chem. Eng..

[18]  Nilay Shah,et al.  Identification of the cost-optimal degree of CO2 capture: An optimisation study using dynamic process models , 2013 .

[19]  Sigurd Skogestad,et al.  Economically efficient operation of CO2 capturing process. Part II. Design of control layer , 2012 .

[20]  Luis A. Ricardez-Sandoval,et al.  Controllability and optimal scheduling of a CO2 capture plant using model predictive control , 2014 .

[21]  Shi-Shang Jang,et al.  Control strategies for flexible operation of power plant with CO2 capture plant , 2012 .

[22]  Gary T. Rochelle,et al.  Dynamic Modeling to Minimize Energy Use for CO2 Capture in Power Plants by Aqueous Monoethanolamine , 2009 .

[23]  Luis A. Ricardez-Sandoval,et al.  Flexible operation and simultaneous scheduling and control of a CO2 capture plant using model predictive control , 2016 .

[24]  Sigurd Skogestad,et al.  Control structure design for complete chemical plants , 2004, Comput. Chem. Eng..

[25]  Claire S. Adjiman,et al.  Modeling the Fluid Phase Behavior of Carbon Dioxide in Aqueous Solutions of Monoethanolamine Using Transferable Parameters with the SAFT-VR Approach , 2010 .

[26]  Edward S. Rubin,et al.  Identifying Cost-Effective CO2 Control Levels for Amine-Based CO2 Capture Systems , 2006 .

[27]  Sigurd Skogestad,et al.  Economically efficient operation of CO2 capturing process part I: Self-optimizing procedure for selecting the best controlled variables , 2011 .

[28]  George Jackson,et al.  SAFT: Equation-of-state solution model for associating fluids , 1989 .

[29]  Iain Staffell,et al.  The role of flexible CCS in the UK's future energy system , 2016 .

[30]  Ali Abbas,et al.  Flexible dynamic operation of solar-integrated power plant with solvent based post-combustion carbon capture (PCC) process , 2015 .

[31]  George Jackson,et al.  THE THERMODYNAMICS OF MIXTURES AND THE CORRESPONDING MIXING RULES IN THE SAFT-VR APPROACH FOR POTENTIALS OF VARIABLE RANGE , 1998 .