On the dynamic response of externally wetted ionic liquid ion sources

The electrostatic extraction of nearly monochromatic solvated ions from externally wetted emitters is possible in the case of some ionic liquids or room temperature molten salts. These compact devices are similar to liquid metal ion sources but positive or negative ion beams can be obtained simply by selecting the appropriate polarity for the power supply. dc operation on a single polarity over relatively long periods of time induces electrochemical degradation of the liquid–metal system making voltage alternation at frequencies of the order of 1 Hz necessary to sustain chemical neutrality. This periodic interruption forces a non-steady state behaviour. In particular, the ion current onset is delayed from a square-shaped voltage input signal by a few milliseconds for tungsten metal emitters wetted with the ionic liquid 1-ethyl-3-methylimidazolium tetrafluoroborate, setting the upper bound for the alternation frequency at about 75 Hz. The dependences of these delays on absolute applied voltages are experimentally explored for this compound, suggesting that viscous drag is the main factor determining the dynamic response.