Influence of Ag replacement on supercooled liquid region and icosahedral phase precipitation of Zr65Al7.5Ni10Cu17.5-xAgx (x = 0–17.5 at%) glassy alloys

[1]  Tao Zhang,et al.  Glass-forming ability, crystallization kinetics, mechanical property, and corrosion behavior of Zr–Al–Ni–Ag glassy alloys , 2014 .

[2]  A. Takeuchi,et al.  Recent development and application products of bulk glassy alloys , 2011 .

[3]  A. Yavari,et al.  Malleable hypoeutectic Zr–Ni–Cu–Al bulk glassy alloys with tensile plastic elongation at room temperature , 2009 .

[4]  L. Schultz,et al.  Production of Zr55Cu30Ni5Al10 Glassy Alloy Rod of 30 mm in Diameter by a Cap-Cast Technique , 2007 .

[5]  Akira Takeuchi,et al.  Classification of Bulk Metallic Glasses by Atomic Size Difference, Heat of Mixing and Period of Constituent Elements and Its Application to Characterization of the Main Alloying Element , 2005 .

[6]  J. Schroers.  The superplastic forming of bulk metallic glasses , 2005 .

[7]  S. J. Kim,et al.  Nanocrystallization and high tensile strength of amorphous Zr-Al-Ni-Cu-Ag alloys , 2001 .

[8]  M. Chen,et al.  RETRACTED – Formation and properties of Zr-based bulk quasicrystalline alloys with high strength and good ductility , 2000 .

[9]  A. Inoue,et al.  Ductile quasicrystalline alloys , 2000 .

[10]  A. Inoue,et al.  Grain growth behaviour of quasicrystals from the supercooled liquid region of Zr65Cu7.5Al7.5Ni10Ag10 metallic glass , 2000 .

[11]  A. Inoue.  Stabilization of metallic supercooled liquid and bulk amorphous alloys , 2000 .

[12]  A. Inoue,et al.  Formation of icosahedral quasicrystalline phase in Zr-Al-Ni-Cu-M (M=Ag, Pd, Au or Pt) systems , 1999 .

[13]  A. Inoue,et al.  Quasicrystals in a partially devitrified Zr65Al7.5Ni10Cu12.5Ag5 bulk metallic glass , 1999 .

[14]  A. Inoue,et al.  Synthesis of High Strength Bulk Amorphous Zr–Al–Ni–Cu–Ag Alloys with a Nanoscale Secondary Phase , 1997 .

[15]  A. Inoue,et al.  Deformation behavior of Zr65Al10Ni10Cu15 glassy alloy with wide supercooled liquid region , 1996 .

[16]  A. Inoue,et al.  Fabrication of bulk glassy Zr55Al10Ni5Cu30 alloy of 30 mm in diameter by a suction casting method , 1996 .

[17]  A. Inoue.  High strength bulk amorphous alloys with low critical cooling rates (overview) , 1995 .

[18]  H. Baker,et al.  Alloy phase diagrams , 1992 .

[19]  A. Inoue,et al.  Amorphous Zr–Al–TM (TM=Co, Ni, Cu) Alloys with Significant Supercooled Liquid Region of Over 100 K , 1991 .

[20]  R. Nandedkar,et al.  On the Formation of a New Superstructure in the Zirconium‐Aluminium System , 1982 .