Significantly improvement in formability and ductility of AZ31 Mg alloy by differential temperature rolling

[1]  Bijin Zhou,et al.  Revealing the weak work-hardening behavior in aged Mg–RE alloys: A synchrotron radiation diffraction study , 2023, Journal of Alloys and Compounds.

[2]  A. Komissarov,et al.  Effects of temperature on critical resolved shear stresses of slip and twining in Mg single crystal via experimental and crystal plasticity modeling , 2023, Journal of Magnesium and Alloys.

[3]  Mahesh Panchal,et al.  Recent advances in the in-plane shear testing of Mg alloy sheets , 2023, Journal of Magnesium and Alloys.

[4]  Weiying Huang,et al.  Effect of 90° route on microstructure of AZ31 magnesium alloy sheets by forging-bending repeated deformation , 2023, Journal of Alloys and Compounds.

[5]  A. Luo,et al.  Bimodal grain structure formation and strengthening mechanisms in Mg-Mn-Al-Ca extrusion alloys , 2023, Journal of Magnesium and Alloys.

[6]  W. Liang,et al.  Enhancement of the mechanical properties of textured AZ31 Mg alloy sheets by bimodal-orientation microstructure: Basal orientation and RD-texture , 2022, Materials Science and Engineering: A.

[7]  M. Barnett,et al.  Three-dimensional crystal plasticity and HR-EBSD analysis of the local stress-strain fields induced during twin propagation and thickening in magnesium alloys , 2022, Journal of Magnesium and Alloys.

[8]  R. Misra,et al.  On the Structure, Mechanical Behavior, and Deformation Mechanism of Az91 Magnesium Alloy Processed by Symmetric and Asymmetric Rolling , 2022, SSRN Electronic Journal.

[9]  A. Luo,et al.  A new dilute Mg–Mn–Al alloy with exceptional rollability and ductility at room temperature , 2022, Materials Science and Engineering: A.

[10]  F. Pan,et al.  Bimodal grained Mg–0.5Gd–xMn alloys with high strength and low-cost fabricated by low-temperature extrusion , 2022, Journal of Alloys and Compounds.

[11]  P. Peng,et al.  An optimized constitutive model and microstructure characterization of a homogenized Al-Cu-Li alloy during hot deformation , 2022, Journal of Alloys and Compounds.

[12]  A. Tang,et al.  Simultaneous improvement in strength and ductility of extruded Mg alloy via novel closed forging extrusion , 2022, Transactions of Nonferrous Metals Society of China.

[13]  Q. Dai,et al.  The mechanisms of grain growth of Mg alloys: A review , 2022, Journal of Magnesium and Alloys.

[14]  Hua Zhang,et al.  Enhanced stretch formability of AZ31 Magnesium alloy sheet by secondary regulation of initial twin orientation , 2022, Materials letters (General ed.).

[15]  Yiming Jin,et al.  Microstructures and mechanical properties of titanium-reinforced magnesium matrix composites: Review and perspective , 2022, Journal of Magnesium and Alloys.

[16]  Huihui Yu,et al.  Quantitative study on the tension-compression yield asymmetry of a Mg-3Al-1 Zn alloy with bimodal texture components , 2022, Journal of Magnesium and Alloys.

[17]  W. Liang,et al.  Improvement of stretch formability and weakening the basal texture of Mg alloy by corrugated wide limit alignment and annealing process , 2022, Journal of Materials Research and Technology.

[18]  Kai Song,et al.  A strategy to regulate the microstructure and properties of Mg-2.0Zn-1.5Mn magnesium alloy by tracing the existence of Mn element , 2022, Journal of Alloys and Compounds.

[19]  A. Luo,et al.  Dynamic precipitation and enhanced mechanical properties of ZK60 magnesium alloy achieved by low temperature extrusion , 2022, Materials Science and Engineering: A.

[20]  Qiang Yang,et al.  Achieving high strength-ductility in a wrought Mg–9Gd–3Y–0.5Zr alloy by modifying with minor La addition , 2021 .

[21]  Z. Jie,et al.  Deformation behavior of the Al-5.9Zn-2.1Mg-2.1Cu (wt%) alloy during isothermal pressure-holding after pre-deformation , 2021, Materials Today Communications.

[22]  J. Moverare,et al.  Shear banding-induced slip enables unprecedented strength-ductility combination of laminated metallic composites , 2021, Journal of Materials Science & Technology.

[23]  M. Zha,et al.  Enhanced ductility and strength of Mg-1Zn-1Sn-0.3Y-0.2Ca alloy achieved by novel micro-texture design , 2021 .

[24]  Dikai Guan,et al.  The evolution of coarse grains and its effects on weakened basal texture during annealing of a cold-rolled magnesium AZ31B alloy , 2021, Journal of Magnesium and Alloys.

[25]  Huamiao Wang,et al.  Grain-size effect on the deformation of Mg–3Al–3Sn alloy: Experiments and elastic-viscoplastic self-consistent modeling , 2021 .

[26]  Haoran Wu,et al.  A novel method for improving the strength and ductility of Mg–Y–Er–Zn alloy using rotary-die equal-channel angular pressing , 2021, Journal of Materials Research and Technology.

[27]  N. Guo,et al.  Simultaneous enhancement of strength and ductility by aging treatment in fine-grained Mg-13Gd alloy , 2021 .

[28]  D. Raabe,et al.  The role of Ca, Al and Zn on room temperature ductility and grain boundary cohesion of magnesium , 2021 .

[29]  P. Nagy,et al.  Superior low-temperature superplasticity in fine-grained ZK60 Mg alloy sheet produced by a combination of repeated upsetting process and sheet extrusion , 2021, Materials Science and Engineering: A.

[30]  M. Zha,et al.  Enhanced ductility of Mg–1Zn–0.2Zr alloy with dilute Ca addition achieved by activation of non-basal slip and twinning , 2021 .

[31]  Dingfei Zhang,et al.  A good balance between strength and ductility in Mg–Zn–Mn-Gd alloy , 2021 .

[32]  Chunhua Xu,et al.  The formation of the cross shear bands and its influence on dynamic recrystallization and mechanical properties under Turned-Reverse Rolling , 2021 .

[33]  Yuan-chun Huang,et al.  Influence of shear deformation during asymmetric rolling on the microstructure, texture, and mechanical properties of the AZ31B magnesium alloy sheet , 2021 .

[34]  S. Shi,et al.  Deformation mechanisms and differential work hardening behavior of AZ31 magnesium alloy during biaxial deformation , 2020 .

[35]  H. Pinto,et al.  Effect of Ce-base mischmetal addition on the microstructure and mechanical properties of hot-rolled ZK60 alloy , 2020 .

[36]  Zhimin Zhang,et al.  Microstructure evolution, texture and mechanical properties of a Mg–Gd–Y–Zn–Zr alloy fabricated by cyclic expansion extrusion with an asymmetrical extrusion cavity: The influence of passes and processing route , 2020 .

[37]  F. Pan,et al.  The effects of orientation control via tension-compression on microstructural evolution and mechanical behavior of AZ31 Mg alloy sheet , 2020 .

[38]  Qing Liu,et al.  On the texture memory effect of a cross-rolled Mg-2Zn-2Gd plate after unidirectional rolling , 2020 .

[39]  Changlin Yang,et al.  Mechanistic investigation of a low-alloy Mg–Ca-based extrusion alloy with high strength–ductility synergy , 2020 .

[40]  Qi Zichen,et al.  Preparation of Steel/Aluminum Laminated Composites by Differential Temperature Rolling with Induction Heating , 2019 .

[41]  Xiaoxu Huang,et al.  Quantitative prediction of texture effect on Hall–Petch slope for magnesium alloys , 2019, Acta Materialia.

[42]  Yun-lai Deng,et al.  Homogenization of 7050 plates by a novel differential temperature rolling , 2018, Materials and Manufacturing Processes.

[43]  K. Alaneme,et al.  Enhancing plastic deformability of Mg and its alloys—A review of traditional and nascent developments , 2017 .

[44]  Cheng Xu,et al.  Preparation and properties for Ti/Al clad plates generated by differential temperature rolling , 2017 .

[45]  Junjie He,et al.  Effect of effective strain gradient on texture and mechanical properties of Mg–3Al–1Zn alloy sheets produced by asymmetric extrusion , 2017 .

[46]  F. Pan,et al.  Enhanced mechanical properties of AZ31 magnesium alloy sheets by continuous bending process after V-bending , 2016 .

[47]  Adrien Chapuis,et al.  Simulations of texture evolution for HCP metals: Influence of the main slip systems , 2015 .

[48]  Tao Chen,et al.  Effects of texture on anisotropy of mechanical properties in annealed Mg–0.6%Zr–1.0%Cd sheets by unidirectional and cross rolling , 2014 .

[49]  F. Pan,et al.  Influence of an asymmetric shear deformation on microstructure evolution and mechanical behavior of AZ31 magnesium alloy sheet , 2014 .

[50]  W. Kim,et al.  Microstructure and mechanical properties of Mg–Al–Zn alloy sheets severely deformed by asymmetrical rolling , 2007 .

[51]  K. Maruyama,et al.  The activity of non-basal slip systems and dynamic recovery at room temperature in fine-grained AZ31B magnesium alloys , 2003 .

[52]  Ashutosh Kumar Singh,et al.  Activation of non-basal slip in coarse-grained Mg-Sc alloy , 2022, Scripta Materialia.

[53]  Dingfei Zhang,et al.  Understanding the enhanced ductility of Mg-Gd with Ca and Zn microalloying by slip trace analysis , 2021 .