A general methodology for calculating mixed mode stress intensity factors and fracture toughness of solder joints with interfacial cracks

[1]  R. Mahajan,et al.  Fracture of Sn-Ag-Cu Solder Joints on Cu Substrates. II: Fracture Mechanism Map , 2012, Journal of Electronic Materials.

[2]  R. Mahajan,et al.  Fracture of Sn-Ag-Cu Solder Joints on Cu Substrates: I. Effects of Loading and Processing Conditions , 2012, Journal of Electronic Materials.

[3]  Yunsung Kim,et al.  Effect of surface finish on the fracture behavior of Sn–Ag–Cu solder joints during high-strain rate loading , 2009 .

[4]  D. R. Frear,et al.  Interfacial fracture toughness of Pb-free solders , 2009, Microelectron. Reliab..

[5]  V. Sarihan,et al.  Effects of strain rate and aging on deformation and fracture of Sn-Ag-Cu solder joints , 2008, 2008 11th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems.

[6]  K. Tu,et al.  Measurement of impact toughness of eutectic SnPb and SnAgCu solder joints in ball grid array by mini-impact tester , 2008 .

[7]  D. Frear,et al.  Deformation Behavior of Sn-3.8Ag-0.7Cu Solder at Intermediate Strain Rates: Effect of Microstructure and Test Conditions , 2008 .

[8]  P. Zavattieri,et al.  Determination of the effective mode-I toughness of a sinusoidal interface between two elastic solids , 2007 .

[9]  John H. L. Pang,et al.  Determination of interface fracture toughness of adhesive joint subjected to mixed-mode loading using finite element method , 2006 .

[10]  M. Toparli,et al.  Fracture toughness determination of composite resin and dentin/composite resin adhesive interfaces by laboratory testing and finite element models. , 1998, Dental materials : official publication of the Academy of Dental Materials.

[11]  H. Pang,et al.  A Compact Mixed Mode (CMM) fracture specimen for adhesive bonded joints , 1997 .

[12]  H.L.J. Pang,et al.  Mixed mode fracture analysis and toughness of adhesive joints , 1995 .

[13]  S. Atluri,et al.  Calculation of stress intensity factors for an interfacial crack between dissimilar anisotropic media, using a hybrid element method and the mutual integral , 1995 .

[14]  R. Yuuki,et al.  Boundary element analysis of dissimilar materials and interface crack , 1994 .

[15]  Yuuki Ryoji,et al.  Mixed mode fracture criteria for an interface crack , 1994 .

[16]  Z. Suo,et al.  Interface crack between two elastic layers , 1990 .

[17]  John W. Hutchinson,et al.  On crack path selection and the interface fracture energy in bimaterial systems , 1989 .

[18]  John W. Hutchinson,et al.  Crack Paralleling an Interface Between Dissimilar Materials , 1987 .

[19]  Z. Hashin,et al.  A method to produce uniform plane-stress states with applications to fiber-reinforced materials , 1978 .

[20]  J. Dundurs.  Discussion: ``Edge-Bonded Dissimilar Orthogonal Elastic Wedges Under Normal and Shear Loading'' (Bogy, D. B., 1968, ASME J. Appl. Mech., 35, pp. 460-466) , 1969 .

[21]  K. Nogita.  Stabilisation of Cu6Sn5 by Ni in Sn-0.7Cu-0.05Ni lead-free solder alloys , 2010 .

[22]  R. Mahajan,et al.  Role of Process and Microstructural Parameters on Mixed Mode Fracture of Sn-Ag-Cu Solder Joints Under Dynamic Loading Conditions , 2009 .

[23]  S. Hamoush,et al.  A stiffness derivative technique to determine mixed mode stress intensity factors of rectilinear anisotropic solids , 1993 .

[24]  Z. Suo,et al.  Mixed mode cracking in layered materials , 1991 .

[25]  Zhigang Suo,et al.  MECHANICS AND 1HERMODYNAMICS OF BRITILE IN1ERFACIAL FAILURE IN BIMATERIAL SYSTEMS , 1990 .

[26]  Zhigang Suo,et al.  Sandwich test specimens for measuring interface crack toughness , 1989 .

[27]  F. Hauser,et al.  Deformation and Fracture Mechanics of Engineering Materials , 1976 .

[28]  James K. Knowles,et al.  On a class of conservation laws in linearized and finite elastostatics , 1972 .

[29]  J. Dundurs,et al.  Discussion of Edge-Bonded Dissimilar Orthogonal Elastic Wedges under Normal and Shear Loading , 1969 .