论文信息 - Average temperature of the rotor of high-speed rotating heat exchanger during the period of thermal start-up

Average temperature of the rotor of high-speed rotating heat exchanger during the period of thermal start-up

Abstract The paper presents results of the calculations of the average temperature variations of model rotor of a high-speed rotating heat exchanger in the course of thermal start up. A model rotor adopted for the calculations has a porous structure formed by radially oriented ducts of a constant circular cross-section. The scope of this paper covers numerical calculations of temperature distribution in the material of the rotor versus its rotational speed, temperature difference of the gases at the inlet, and types of the rotor material. With the use of these results, graphs are elaborated representing the dependence of the rotor’s dimensionless temperature on the Fourier number, with the Biot number used as a parameter.

Joanna Wilk | J. Wilk

[1] R. L. Earle. CHAPTER 5 – HEAT-TRANSFER THEORY , 1983 .

[2] Franz Mayinger,et al. Transport processes in narrow channels with application to rotary exchangers , 1998 .

[3] J. Wilk. Mass/heat transfer coefficient in the radially rotating circular channels of the rotor of the high-speed heat regenerator , 2004 .

[4] John W. Mitchell,et al. Design theory for rotary heat and mass exchangers—I. Wave analysis of rotary heat and mass exchangers with infinite transfer coefficients , 1985 .

[5] J. Wilk,et al. Forced convection mass/heat transfer coefficient at the surface of the rotor of the sucking and forcing regenerative exchanger , 1995 .