Microelectromechanical devices for satellite thermal control

Future space missions will include constellations of spacecraft, including nano- and picosatellites, where adaptive thermal control systems will be needed that fit the constraints of space applications with limited power and mass budgets. A microelectromechanical systems (MEMS) solution has been developed that will vary the emissivity on the surface of the small satellite radiator. The system is based on louver thermal controllers, where panels are mechanically positioned to modulate the effective radiator surface area. This system consists of MEMS arrays of gold-coated sliding shutters, fabricated with the Sandia ultraplanar, multilevel MEMS technology fabrication process, which utilizes multilayer polycrystalline silicon surface micromachining. The shutters can be operated independently to allow digital control of the effective emissivity. This first demonstrator technology is limited in the possible emittance range to a 40% change. Early prototypes of MEMS louvers that open away from the structure have shown the capability of a much wider dynamic range. The first generation of this active thermal management system will be demonstrated on NASA's New Millennium Program ST-5 spacecraft. With the opportunity to validate the MEMS thermal control technology in space on ST-5, lightweight, low-power MEMS radiators offer a possibility for flexible thermal control on future nanosatellites.

[1]  D. M. Tanner,et al.  The effect of humidity on the reliability of a surface micromachined microengine , 1999, 1999 IEEE International Reliability Physics Symposium Proceedings. 37th Annual (Cat. No.99CH36296).

[2]  Theodore D. Swanson,et al.  Design of the Thermal Control System for the Space Technology 5 Microsatellite , 2001 .

[3]  Rodgers,et al.  Designing microelectromechanical systems-on-a-chip in a 5-level surface micromachine technology , 1998 .

[4]  Y. Jaluria,et al.  An Introduction to Heat Transfer , 1950 .

[5]  Daniel M. Brown,et al.  MEMS microshutter SLM for intensity modulation , 1999, Photonics West.

[6]  William C. Tang,et al.  Laterally driven polysilicon resonant microstructures , 1989, IEEE Micro Electro Mechanical Systems, , Proceedings, 'An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots'.

[7]  E. Obermeier,et al.  A micro shutter for applications in optical and thermal detectors , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[8]  Gary McGuire,et al.  Artificial eyelid for protection of optical sensors , 2000, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[9]  Robert Osiander,et al.  MEMS in aerospace applications: Thermal control shutters , 2001 .

[10]  Sridhar Kota,et al.  A new class of high force, low-voltage, compliant actuation system , 2000 .

[11]  Robert Osiander,et al.  Controlling Variable Emittance (MEMS) Coatings for space applications , 2002, ITherm 2002. Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.02CH37258).

[12]  Robert Osiander,et al.  MEMS Shutters for Spacecraft Thermal Control , 2002 .

[13]  Theodore D. Swanson,et al.  Development of the Variable Emittance Thermal Suite for the Space Technology 5 Microsatellite , 2002 .

[14]  Franz Lura,et al.  Elaboration of thermal control systems on heat pipes for microsatellites Magion 4, 5 and BIRD , 2003 .

[15]  Mary J. Li,et al.  Magnetically actuated microshutter arrays , 2001, SPIE MOEMS-MEMS.

[16]  Robert Osiander,et al.  MEMS Louvers for Thermal Control , 1998 .

[17]  C. Figus,et al.  Capillary fluid loop developments in Astrium , 2003 .

[18]  M. Donabedian,et al.  Spacecraft Thermal Control Handbook, Volume II: Cryogenics , 2004 .

[19]  Antonio Martínez de Aragón.  Space applications of micro/nano-technologies , 1998 .