Many adaptive optics (AO) applications require mirror arrays with hundreds to thousands of segments, necessitating a CMOS-compatible MEMS process to integrate the mirrors with their driving electronics. This paper proposes a MEMS actuator that is fabricated using low-temperature polycrystalline silicon-germanium (poly-SiGe) surface-micromaching technology (total thermal budget is 6 hours at or below 425°C). The MEMS actuator consists of three flexures and a hexagonal platform, on which a micromirror is to be assembled. The flexures are made of single-layer poly-SiGe with stress gradient across thickness of the film, making them bend out-of-plane after sacrificial-layer release to create a large nominal gap. The platform, on the other hand, has an additional stress-balancing SiGe layer deposited on top, making the dual-layer stack stay flat after release. Using this process, we have successfully fabricated the MEMS actuator which is lifted 14.6 μm out-of-plane by 290-μm-long flexures. The 2-μm-thick hexagonal mirror-platform exhibits a strain gradient of -5.5×10-5 μm-1 (equivalent to 18 mm radius-of-curvature), which would be further reduced once the micromirror is assembled.
[1]
Roger T. Howe,et al.
Optimization of Poly-SiGe Deposition Processes for Modular MEMS Integration
,
2003
.
[2]
R. Howe,et al.
Fluidic self-assembly of micromirrors onto microactuators using capillary forces
,
2002
.
[3]
Christian Rembe,et al.
Micromirrors for Adaptive-Optics Arrays
,
2001
.
[4]
Albert P. Pisano,et al.
POLY-SIGE: A HIGH-Q STRUCTURAL MATERIAL FOR INTEGRATED RF MEMS
,
2002
.
[5]
R. Howe,et al.
Polycrystalline silicon-germanium films for integrated microsystems
,
2003
.
[6]
T. King,et al.
Low-Resistance Silicon-Germanium Contact Technology for Modular Integration of MEMS with Electronics
,
2004
.