Online Measuring Method for the Engines’ IVC Timing Based on the In-Cylinder Pressure Fluctuation

[1]  Fushui Liu,et al.  Study on the Intake Valve Close Timing Misalignment Between the Maximum Volume Efficiency and the None Backflow on a Single Cylinder Diesel Engine , 2018, Journal of Engineering for Gas Turbines and Power.

[2]  Ming Jia,et al.  Multi-objective optimization of the combustion of a heavy-duty diesel engine with low temperature combustion (LTC) under a wide load range: (II) Detailed parametric, energy, and exergy analysis , 2017 .

[3]  Wen-ying Yang,et al.  Characteristics and effect factors of pressure oscillation in multi-injection DI diesel engine at high-load conditions , 2017 .

[4]  Xiang-rong Li,et al.  Combustion and emission performance of a split injection diesel engine in a double swirl combustion system , 2016 .

[5]  Alasdair Cairns,et al.  The competing chemical and physical effects of transient fuel enrichment on heavy knock in an optical spark ignition engine , 2016 .

[6]  Konstantinos Boulouchos,et al.  Cycle-to-cycle variations in diesel engines , 2016 .

[7]  Gary M. Bone,et al.  Fault detection and diagnosis of diesel engine valve trains , 2016 .

[8]  Fabio Bozza,et al.  Potentials of cooled EGR and water injection for knock resistance and fuel consumption improvements of gasoline engines , 2016 .

[9]  Emiliano Pipitone,et al.  Knock onset prediction of propane, gasoline and their mixtures in spark ignition engines , 2016 .

[10]  Tian Ran Lin,et al.  Normalization and source separation of acoustic emission signals for condition monitoring and fault detection of multi-cylinder diesel engines , 2015 .

[11]  Seunghwan Keum,et al.  Effect of Valve Opening/Closing Setup on Computational Fluid Dynamics Prediction of Engine Flows , 2015 .

[12]  Adrian Clenci,et al.  A CFD (computational fluid dynamics) study on the effects of operating an engine with low intake valve lift at idle corresponding speed , 2014 .

[13]  Wei Du,et al.  Development of performance and combustion system of Atkinson cycle internal combustion engine , 2014 .

[14]  P. Brijesh,et al.  Exhaust emissions and its control methods in compression ignition engines: A review , 2013 .

[15]  Ming Jia,et al.  Numerical evaluation of the potential of late intake valve closing strategy for diesel PCCI (premixed charge compression ignition) engine in a wide speed and load range , 2013 .

[16]  Ezzeddine Ftoutou,et al.  Internal combustion engine valve clearance fault classification using multivariate analysis of variance and discriminant analysis , 2012 .

[17]  Zhen Huang,et al.  Fuel design and management for the control of advanced compression-ignition combustion modes , 2011 .

[18]  Ming Jia,et al.  The effect of injection timing and intake valve close timing on performance and emissions of diesel PCCI engine with a full engine cycle CFD simulation , 2011 .

[19]  Mingfa Yao,et al.  Progress and recent trends in homogeneous charge compression ignition (HCCI) engines , 2009 .

[20]  Miroslaw L. Wyszynski,et al.  A modelling study into the effects of variable valve timing on the gas exchange process and performance of a 4-valve DI homogeneous charge compression ignition (HCCI) engine , 2009 .

[21]  Zhenyuan Zhong,et al.  Fault diagnosis for diesel valve trains based on time–frequency images , 2008 .

[22]  B. Walter,et al.  Variable Valve Actuation Systems for Homogeneous Diesel Combustion: How Interesting are They? , 2008 .

[23]  P. K. Senecal,et al.  A New Parallel Cut-Cell Cartesian CFD Code for Rapid Grid Generation Applied to In-Cylinder Diesel Engine Simulations , 2007 .

[24]  John Alexander Steel,et al.  Acoustic emission mapping of diesel engines for spatially located time series—Part II: Spatial reconstitution , 2007 .

[25]  John Alexander Steel,et al.  Source location of acoustic emission in diesel engines , 2007 .

[26]  Robert Lewis Reuben,et al.  AE mapping of engines for spatially located time series , 2005 .

[27]  James Turner,et al.  Influence of variable valve timings on the gas exchange process in a controlled auto-ignition engine , 2004 .

[28]  L. K. Hansen,et al.  On condition monitoring of exhaust valves in marine diesel engines , 1999, Neural Networks for Signal Processing IX: Proceedings of the 1999 IEEE Signal Processing Society Workshop (Cat. No.98TH8468).

[29]  Douglas A. Feldmaier,et al.  Cavity resonances in engine combustion chambers and some applications , 1983 .

[30]  Tadeu Cavalcante Cordeiro de Melo,et al.  Knocking prediction in internal combustion engines via thermodynamic modeling: preliminary results and comparison with experimental data , 2017 .

[31]  Carlos Guardiola,et al.  Estimation of trapped mass by in-cylinder pressure resonance in HCCI engines , 2016 .

[32]  Hui Xie,et al.  The effects of intake backflow on in-cylinder situation and auto ignition in a gasoline controlled auto ignition engine , 2013 .

[33]  Timothy A. Bodisco,et al.  Bayesian models for the determination of resonant frequencies in a DI diesel engine , 2011 .

[34]  Peter W. Tse,et al.  EMD-based fault diagnosis for abnormal clearance between contacting components in a diesel engine , 2010 .

[35]  Ming Jia,et al.  Full Engine Cycle CFD Investigation of Effects of Variable Intake Valve Closing on Diesel PCCI Combustion and Emissions , 2009 .

[36]  Robert Lewis Reuben,et al.  The role of acoustic emission in industrial condition monitoring. , 1998 .

[37]  Willard W. Pulkrabek,et al.  Engineering Fundamentals of the Internal Combustion Engine , 1997 .