Ironless axial flux permanent magnet motor control with multilevel cascaded H-bridge converter for electric vehicle applications

The Ironless Axial Flux Permanent Magnet (IAFPM) machine, also referred to as air-cored or coreless machine is a variant of the AFPM machine with the iron removed from the stator. This allows the efficiency and power density of the machine to be further improved [1]-[4]. However, IAFPM motors generally have very low inductance (< 50μH) due to their ironless nature [5], which increases the design complexity of the drive system as the motor currents becomes difficult to control. If neglected, the large current ripple will produce significant torque ripple. The Multilevel Cascaded H-bridge (MLCHB) converter topology could potentially address this issue. This paper first provides an analysis of the IAFPM motor characteristics and control method, then it provides a review of topologies currently used to control IAFPM motors. Lastly the application of a MLCHB converter for the control of low inductance motors is introduced. Simulation results of an IAFPM motor with 5μH line inductance driven by a MLCHB converter are presented with comparisons made to existing strategies.

[1]  Po-Tai Cheng,et al.  Zero-sequence voltage injection for DC capacitor voltage balancing control of the star-connected cascaded H-bridge PWM converter under unbalanced grid , 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).

[2]  Ezio Santini,et al.  Multi-stage axial-flux PM machine for wheel direct drive , 1995 .

[3]  Alan J. Watson,et al.  A Complete Harmonic Elimination Approach to DC Link Voltage Balancing for a Cascaded Multilevel Rectifier , 2007, IEEE Transactions on Industrial Electronics.

[4]  Leon M. Tolbert,et al.  Charge balance control schemes for cascade multilevel converter in hybrid electric vehicles , 2002, IEEE Trans. Ind. Electron..

[5]  Gang Liu,et al.  Instantaneous Torque Control of Small Inductance Brushless DC Motor , 2012, IEEE Transactions on Power Electronics.

[6]  H. V. Venkatasetty,et al.  Recent advances in lithium-ion and lithium-polymer batteries , 2002, Seventeenth Annual Battery Conference on Applications and Advances. Proceedings of Conference (Cat. No.02TH8576).

[7]  Gui-Jia Su,et al.  High-performance permanent magnet machine drive for electric vehicle applications using a current source inverter , 2008, 2008 34th Annual Conference of IEEE Industrial Electronics.

[8]  Juan Dixon,et al.  23-Level Inverter for Electric Vehicles Using a Single Battery Pack and Series Active Filters , 2012, IEEE Transactions on Vehicular Technology.

[9]  Baoming Ge,et al.  Medium-Voltage Multilevel Converters—State of the Art, Challenges, and Requirements in Industrial Applications , 2010, IEEE Transactions on Industrial Electronics.

[10]  Maarten J. Kamper,et al.  Analysis and performance of an ironless stator axial flux PM machine , 1999 .

[11]  Yongdong Li,et al.  Analysis and Calculation of Zero-Sequence Voltage Considering Neutral-Point Potential Balancing in Three-Level NPC Converters , 2010, IEEE Transactions on Industrial Electronics.

[12]  Bin Wu.  PWM Current Source Inverters , 2006 .

[13]  Abdelaziz Kheloui,et al.  Hybrid Cascaded H-Bridge Multilevel-Inverter Induction-Motor-Drive Direct Torque Control for Automotive Applications , 2010, IEEE Transactions on Industrial Electronics.

[14]  Tao Fu,et al.  Predictive Instantaneous Torque Control for Disc Coreless Permanent Magnet Synchronous Motor With the Current Source Chopper , 2015, IEEE Transactions on Power Electronics.

[15]  Bin Wu,et al.  Powering the Future of Industry: High-Power Adjustable Speed Drive Topologies , 2012, IEEE Industry Applications Magazine.

[16]  Fabrizio Marignetti,et al.  Influence of voltage and current source inverters on low-power induction motors , 2005 .

[17]  S R Pulikanti,et al.  Voltage Balancing Control of Three-Level Active NPC Converter Using SHE-PWM , 2011, IEEE Transactions on Power Delivery.

[18]  Fang Zheng Peng,et al.  Multilevel inverters: a survey of topologies, controls, and applications , 2002, IEEE Trans. Ind. Electron..

[19]  M. Marchesoni,et al.  A non conventional power converter for plasma stabilization , 1988, PESC '88 Record., 19th Annual IEEE Power Electronics Specialists Conference.

[20]  K. Gopakumar,et al.  Generation of Higher Number of Voltage Levels by Stacking Inverters of Lower Multilevel Structures With Low Voltage Devices for Drives , 2017, IEEE Transactions on Power Electronics.

[21]  M. P. Kazmierkowski,et al.  High-Performance Motor Drives , 2011, IEEE Industrial Electronics Magazine.

[22]  Thomas A. Lipo,et al.  CarrierBased PWM of Multilevel Inverters , 2003 .

[23]  Bin Wu,et al.  Multilevel Voltage-Source-Converter Topologies for Industrial Medium-Voltage Drives , 2007, IEEE Transactions on Industrial Electronics.

[24]  N. Schofield,et al.  Current Source Inverters for PM machine control , 2009, 2009 IEEE International Electric Machines and Drives Conference.

[25]  T. Lipo,et al.  Hybrid multilevel power conversion system: a competitive solution for high power applications , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[26]  Ching Chuen Chan,et al.  Overview of Permanent-Magnet Brushless Drives for Electric and Hybrid Electric Vehicles , 2008, IEEE Transactions on Industrial Electronics.

[27]  A. Emadi,et al.  Design, Analysis, and Optimization of Ironless Stator Permanent Magnet Machines , 2013, IEEE Transactions on Power Electronics.

[28]  K. Gopakumar,et al.  Low-inductance axial flux BLDC motor drive for more electric aircraft , 2012 .

[29]  Metin Aydin,et al.  A New Coreless Axial Flux Interior Permanent Magnet Synchronous Motor With Sinusoidal Rotor Segments , 2016, IEEE Transactions on Magnetics.

[30]  Gui-Jia Su,et al.  Extended constant-torque and constant-power speed range control of permanent magnet machine using a current source inverter , 2009, 2009 IEEE Vehicle Power and Propulsion Conference.

[31]  Zi-Qiang Zhu,et al.  Electrical Machines and Drives for Electric, Hybrid, and Fuel Cell Vehicles , 2007, Proceedings of the IEEE.

[32]  Mika Salo,et al.  vector-controlled PWM current-source-inverter-fed induction motor drive with a new stator current control method , 2005, IEEE Transactions on Industrial Electronics.

[33]  Gui-Jia Su,et al.  Boost mode test of a current-source-inverter-fed permanent magnet synchronous motor drive for automotive applications , 2010, 2010 IEEE 12th Workshop on Control and Modeling for Power Electronics (COMPEL).

[34]  Hew Wooi Ping,et al.  A Comprehensive Review of Axial-Flux Permanent-Magnet Machines , 2014, Canadian Journal of Electrical and Computer Engineering.

[35]  Gui-Jia Su,et al.  Multilevel DC link inverter for brushless permanent magnet motors with very low inductance , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[36]  F. Caricchi,et al.  Active Output Voltage Regulation for an Ironless Axial-Flux PM Automotive Alternator with Electromechanical Flux Weakening , 2007, 2007 IEEE Industry Applications Annual Meeting.

[37]  Sergio M. Savaresi,et al.  A New BMS Architecture Based on Cell Redundancy , 2011, IEEE Transactions on Industrial Electronics.

[38]  M.J. Kamper,et al.  Optimal design of a coreless stator axial flux permanent-magnet generator , 2005, IEEE Transactions on Magnetics.

[39]  L.G. Franquelo,et al.  The age of multilevel converters arrives , 2008, IEEE Industrial Electronics Magazine.

[40]  V.F. Pires,et al.  Narrow Pulse Elimination PWM for Multilevel Digital Audio Power Amplifiers Using Two Cascaded H-Bridges as a Nine-Level Converter , 2007, IEEE Transactions on Power Electronics.

[41]  Weiwei Geng,et al.  Investigation of a New Ironless-Stator Self-Bearing Axial Flux Permanent Magnet Motor , 2016, IEEE Transactions on Magnetics.

[42]  José R. Rodríguez,et al.  A Survey on Neutral-Point-Clamped Inverters , 2010, IEEE Transactions on Industrial Electronics.

[43]  F. Crescimbini,et al.  Performance of coreless-winding axial-flux permanent-magnet generator with power output at 400 Hz-3000 rev/min , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.