Mechanical and microstructural characteristics of cemented paste tailings modified with nano-calcium carbonate and cured under various thermal conditions

ABSTRACT This paper focuses on the evaluation of the strength development and microstructure of nano-calcium carbonate (CaCO3) cemented paste backfill experimentally cured under isothermal conditions at room temperature and non-isothermal conditions in the field. A series of mechanical (uniaxial compressive strength, UCS) and microstructural (thermogravimetric, mercury intrusion porosimetry, scanning electron microscope) tests as well as monitoring experiments are experimentally conducted on cemented paste backfill (CPB) specimens with and without nano-calcium carbonate and cured at different times and under isothermal or non-isothermal conditions. The results show that the addition of nano-CaCO3 particles to CPB significantly improves its mechanical strength, irrespective of the thermal curing conditions (isothermal, field non-isothermal conditions). However, the impact of nano-CaCO3 particles on the increase in strength of CPB is only effective or significant at the early ages (curing time≤7 days). It is also found that the higher temperatures improve the accelerating effect of nano-CaCO3 much more than they accelerate the PCI hydration reactions in the first 3 days. Moreover, it is also found the sulphate ions present in the natural gold tailings negatively affect the mechanical performance of nano-CPB and reduced the accelerating effect of nano-CaCO3 due to sulphate attacks.

[1]  K. Adhikari,et al.  Nano Calcium Carbonate (CaCO3) as a Reliable, Durable, and Environment-Friendly Alternative to Diminishing Fly Ash , 2021, Materials.

[2]  D. Fino,et al.  Recycling CO2 from flue gas for CaCO3 nanoparticles production as cement filler: A Life Cycle Assessment , 2021 .

[3]  M. Fall,et al.  Time- and Temperature-Dependence of Rheological Properties of Cemented Tailings Backfill with Sodium Silicate , 2021 .

[4]  K. Adhikari,et al.  Mechanical and Durability Properties of Portland Limestone Cement (PLC) Incorporated with Nano Calcium Carbonate (CaCO3) , 2021, Materials.

[5]  Peng Zhang,et al.  Effect of Nano-CaCO3 on the Mechanical Properties and Durability of Concrete Incorporating Fly Ash , 2020 .

[6]  M. Fall,et al.  Strength development of cemented tailings materials containing polycarboxylate ether-based superplasticizer: experimental results on the effect of time and temperature , 2020 .

[7]  Jiangong Yang.  Effect of nano CaCO3 on durability of concrete , 2020, E3S Web of Conferences.

[8]  Aaas News,et al.  Book Reviews , 1893, Buffalo Medical and Surgical Journal.

[9]  A. Bull.  Temperature Dependence of the Leachability of Cemented Paste Backfill , 2019 .

[10]  S. Shen,et al.  Effect of Macro-, Micro- and Nano-Calcium Carbonate on Properties of Cementitious Composites—A Review , 2019, Materials.

[11]  F. Glasser,et al.  A New, Carbon-Negative Precipitated Calcium Carbonate Admixture (PCC-A) for Low Carbon Portland Cements , 2019, Materials.

[12]  F. Stellacci,et al.  Amorphous CaCO3: Influence of the Formation Time on Its Degree of Hydration and Stability. , 2018, Journal of the American Chemical Society.

[13]  M. Fall,et al.  Sulphate induced changes in the reactivity of cemented tailings backfill , 2017 .

[14]  J. de Brito,et al.  Review on concrete nanotechnology , 2016 .

[15]  M. Fall,et al.  Sulphate effect on the early age strength and self-desiccation of cemented paste backfill , 2016 .

[16]  M. Lachemi,et al.  Nano-modification to improve the ductility of cementitious composites , 2015 .

[17]  Maisarah Ali,et al.  Effect of Calcium Carbonate Replacement on Workability and Mechanical Strength of Portland Cement Concrete , 2015 .

[18]  Scott Z. Jones,et al.  Multi-Scale Investigation of the Performance of Limestone in Concrete , 2015 .

[19]  T. Belem,et al.  Curing time effect on consolidation behaviour of cemented paste backfill containing different cement types and contents , 2015 .

[20]  G. Saoût,et al.  Influence of limestone and anhydrite on the hydration of Portland cements , 2014 .

[21]  Alireza Ghirian,et al.  Coupled thermo-hydro-mechanical–chemical behaviour of cemented paste backfill in column experiments. Part I: Physical, hydraulic and thermal processes and characteristics , 2013 .

[22]  Di Wu,et al.  Coupled Modeling of Temperature Distribution and Evolution in Cemented Tailings Backfill Structures that Contain Mineral Admixtures , 2012, Geotechnical and Geological Engineering.

[23]  M. Fall,et al.  Coupled Thermochemical Effects on the Strength Development of Slag-Paste Backfill Materials , 2011 .

[24]  Mamadou Fall,et al.  Coupled effects of sulphate and temperature on the strength development of cemented tailings backfills: Portland cement-paste backfill , 2010 .

[25]  M. Fall,et al.  A contribution to understanding the effects of curing temperature on the mechanical properties of mine cemented tailings backfill , 2010 .

[26]  G. Blight.  Geotechnical Engineering for Mine Waste Storage Facilities , 2009 .

[27]  M. Fall,et al.  Modeling the heat development in hydrating CPB structures , 2009 .

[28]  Farshad Rajabipour,et al.  Electrical conductivity of drying cement paste , 2007 .

[29]  B. Lothenbach,et al.  The Role of Calcium Carbonate in Cement Hydration , 2007 .

[30]  Mamadou Fall,et al.  Modeling the effect of sulphate on strength development of paste backfill and binder mixture optimization , 2005 .

[31]  Edgardo F. Irassar,et al.  Studies on the carboaluminate formation in limestone filler-blended cements , 2001 .

[32]  L. M. Amaratunga,et al.  Development of a high modulus paste fill using fine gold mill tailings , 1997 .

[33]  G. Ferro,et al.  Nano CaCO3 particles in cement mortars towards developing a circular economy in the cement industry , 2020 .

[34]  W. Marsden.  I and J , 2012 .

[35]  J. J. Beaudoin,et al.  Effect of nano-CaCO3 on hydration of cement containing supplementary cementitious materials , 2011 .

[36]  Mamadou Fall,et al.  Mix proportioning of underground cemented tailings backfill , 2008 .

[37]  Nagaratnam Sivakugan,et al.  Geotechnical considerations in mine backfilling in Australia , 2006 .

[38]  Mamadou Fall,et al.  Experimental characterization of the influence of tailings fineness and density on the quality of cemented paste backfill , 2005 .