论文信息 - Evaluation of the thixoformability of the A332 Alloy (Al–9.5 wt%Si–2.5 wt%Cu) - 字舞流文

Evaluation of the thixoformability of the A332 Alloy (Al–9.5 wt%Si–2.5 wt%Cu)

E. J. Zoqui | Marco Naldi

[1] A. Samuel,et al. Effects of Sr-modification, iron-based intermetallics and aging treatment on the impact toughness of 356 Al–Si–Mg alloy , 2011 .

[2] H. Atkinson,et al. Cooling slope casting to obtain thixotropic feedstock II: observations with A356 alloy , 2008 .

[3] E. J. Zoqui,et al. Thixo-formability of the AA6063 alloy : Conventional production processes versus electromagnetic stirring , 2008 .

[4] R. Ghomashchi,et al. The effect of dissolved titanium on the primary α-Al grain and globule size in the conventional and semi-solid casting of 356 Al–Si Alloy , 2006 .

[5] M. Paes,et al. Semi-solid behavior of new Al–Si–Mg alloys for thixoforming , 2005 .

[6] H. Atkinson,et al. Thermodynamic Prediction of Thixoformability in Alloys Based on the Al-Si-Cu and Al-Si-Cu-Mg Systems , 2005 .

[7] Z. Lee,et al. The effect of grain refining and oxide inclusion on the fluidity of Al–4.5Cu–0.6Mn and A356 alloys , 2003 .

[8] G. Lu,et al. Effects of low-frequency electromagnetic field on microstructures and macrosegregation of continuous casting 7075 aluminum alloy , 2003 .

[9] H. Atkinson,et al. Rapid compression of aluminum alloys and its relationship to thixoformability , 2003 .

[10] M. Flemings,et al. Deformation of semi-solid Sn-15 Pct Pb alloy , 1980 .