It is necessary for encapsulants to have not only a suitable coefficient of thermal expansion (CTE) compatible to IC devices and a low dielectric constant to reduce the device propagation delay, but also a high thermal conductivity to dissipate large amounts of heat from power-hungry, high-speed IC and high-density packages. Fillers such as silica have been mixed with polymers to improve their properties. Aluminum nitride (AlN) is considered as an alternative one, because it has a higher theoretical thermal conductivity of ∼320 W/mK 1 , a compatible CTE with silicon chips and a low dielectric constant. Commercial AlN fillers are angular in shape, because they are prepared via grinding coarse AlN powders synthesized by direct nitridation of aluminum metal and classification. The angular AlN are not expected to have high fluidity when mixed with polymers and hence low packing density. Recently, we successfully obtained single-crystalline spherical AlN fillers. Furthermore, polymer composites filled with the spherical AlN showed excellent thermal conductivity (>8 W/mK) as encapsulants for dissipating the heat generated in electronic devices.
[1]
E. Cox.
A method of assigning numerical and percentage values to the degree of roundness of sand grains
,
1927
.
[2]
Junichi Tatami,et al.
Morphology-retaining synthesis of AlN particles by gas reduction-nitridation
,
2002
.
[3]
Robert L. Powell,et al.
Effect of particle size distributions on the rheology of concentrated bimodal suspensions
,
1994
.
[4]
C. O. Dugger.
The synthesis of aluminum nitride single crystals
,
1974
.
[5]
K. Watari.
High Thermal Conductivity Non-Oxide Ceramics
,
2001
.
[6]
Robert O. Pohl,et al.
The intrinsic thermal conductivity of AIN
,
1987
.
[7]
G. A. Slack,et al.
Nonmetallic crystals with high thermal conductivity
,
1973
.