Quenching–partitioning–tempering process for ultra-high strength steel

A quenching–partitioning–tempering (QPT) precipitation process is proposed to further increase the strength of ultra-high strength steels containing the carbide forming element Nb and/or Mo. Based ...

[1]  D. Matlock,et al.  Carbon partitioning to austenite from martensite or bainite during the quench and partition (Q&P) process: A critical assessment , 2008 .

[2]  D. Matlock,et al.  Influence of interface migration during annealing of martensite/austenite mixtures , 2007 .

[3]  D. Matlock,et al.  Quenching and Partitioning of Ni-Added High Strength Steels , 2007 .

[4]  D. Matlock,et al.  Quenching and partitioning martensite-a novel steel heat treatment , 2006 .

[5]  D. Matlock,et al.  Comments on “On the definitions of paraequilibrium and orthoequilibrium” by M. Hillert and J. Ågren, Scripta Materialia, 50, 697–9 (2004) , 2005 .

[6]  D. Matlock,et al.  Partitioning of carbon from supersaturated plates of ferrite, with application to steel processing and fundamentals of the bainite transformation , 2004 .

[7]  D. Matlock,et al.  Application of the Quenching and Partitioning (Q&P) Process to a Medium-Carbon, High-Si Microalloyed Bar Steel , 2003 .

[8]  D. Matlock,et al.  Carbon partitioning into austenite after martensite transformation , 2003 .

[9]  G. B. Olson,et al.  Precipitation of paraequilibrium cementite: Experiments, and thermodynamic and kinetic modeling , 2002 .

[10]  L. Höglund,et al.  DICTRA, a tool for simulation of diffusional transformations in alloys , 2000 .

[11]  L. Höglund,et al.  Escape of carbon from ferrite plates in austenite , 1993 .

[12]  J. H. Huang,et al.  The fracture and shear band formation in an AlCuLiMgZr alloy , 1986 .

[13]  Cao Siwei,et al.  Mechanism of embrittlement in tempered martensite , 1985 .

[14]  Li Lin.  A method for calculating Ms in multicomponent steels and its application to heat treatment , 1985 .

[15]  T. Hsu.  An approximate approach for the calculation ofMs in iron-base alloys , 1985 .

[16]  T. Hsu,et al.  Thermodynamics of the bainitic transformation in Fe-C alloys , 1984 .

[17]  V. Seetharaman.  Deformation and martensitic transformation , 1984 .

[18]  T. Hsu,et al.  Diffusion of carbon during the formation of low-carbon martensite , 1983 .

[19]  D. P. Koistinen,et al.  A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels , 1959 .

[20]  John Crank,et al.  The Mathematics Of Diffusion , 1956 .