Emerging Biofabrication Strategies for Engineering Complex Tissue Constructs
暂无分享,去创建一个
Ali Navaei | Mehdi Nikkhah | Mohsen Akbari | Alireza Dolatshahi-Pirouz | Ashish Thakur | Nima Khadem Mohtaram | Bahram Mirani | M. Mehrali | M. Akbari | N. K. Mohtaram | S. Willerth | M. Nikkhah | A. Dolatshahi-Pirouz | R. Pedde | Stephanie M Willerth | Mehdi Mehrali | A. Thakur | A. Navaei | Bahram Mirani | Tara Styan | Sarah Wong | Armin Bayati | R Daniel Pedde | Tara Styan | Sarah Wong | Armin Bayati
[1] Uwe Klinge,et al. The lightweight and large porous mesh concept for hernia repair , 2005, Expert review of medical devices.
[2] B. Yao,et al. 3D bioprinted extracellular matrix mimics facilitate directed differentiation of epithelial progenitors for sweat gland regeneration. , 2016, Acta biomaterialia.
[3] Yoshito Ikada,et al. Challenges in tissue engineering , 2006, Journal of The Royal Society Interface.
[4] Adnan Memić,et al. Tissue Engineering: Nano‐Enabled Approaches for Stem Cell‐Based Cardiac Tissue Engineering(Adv. Healthcare Mater. 13/2016) , 2016, Advanced healthcare materials.
[5] Peyton B. Hudson,et al. Joseph's Introductory Textile Science , 1992 .
[6] F. Guillemot,et al. Laser-assisted bioprinting for creating on-demand patterns of human osteoprogenitor cells and nano-hydroxyapatite , 2011, Biofabrication.
[7] A. Mikos,et al. Review: tissue engineering for regeneration of articular cartilage. , 2000, Biomaterials.
[8] Joseph W Freeman,et al. Ligament tissue engineering: an evolutionary materials science approach. , 2005, Biomaterials.
[9] Y. S. Zhang,et al. An injectable shear-thinning biomaterial for endovascular embolization , 2016, Science Translational Medicine.
[10] J. Vacanti,et al. Tissue engineering : Frontiers in biotechnology , 1993 .
[11] R. Klebe,et al. Cytoscribing: a method for micropositioning cells and the construction of two- and three-dimensional synthetic tissues. , 1988, Experimental cell research.
[12] Alessandro Sannino,et al. Polymeric hydrogels for burn wound care: Advanced skin wound dressings and regenerative templates , 2014, Burns & Trauma.
[13] Pankaj Karande,et al. Design and fabrication of human skin by three-dimensional bioprinting. , 2014, Tissue engineering. Part C, Methods.
[14] A. Schambach,et al. Skin tissue generation by laser cell printing , 2012, Biotechnology and bioengineering.
[15] Ali Khademhosseini,et al. A Bioactive Carbon Nanotube‐Based Ink for Printing 2D and 3D Flexible Electronics , 2016, Advanced materials.
[16] James J. Yoo,et al. Hybrid printing of mechanically and biologically improved constructs for cartilage tissue engineering applications , 2012, Biofabrication.
[17] Ali Navaei,et al. PNIPAAm-based biohybrid injectable hydrogel for cardiac tissue engineering. , 2016, Acta biomaterialia.
[18] R. B. Ashman,et al. Young's modulus of trabecular and cortical bone material: ultrasonic and microtensile measurements. , 1993, Journal of biomechanics.
[19] Shoji Takeuchi,et al. Metre-long cell-laden microfibres exhibit tissue morphologies and functions. , 2013, Nature materials.
[20] A. McGuigan,et al. Challenges and opportunities for tissue-engineering polarized epithelium. , 2014 .
[21] A. J. Grodzinsky,et al. Self-assembling peptide hydrogel fosters chondrocyte extracellular matrix production and cell division: Implications for cartilage tissue repair , 2002, Proceedings of the National Academy of Sciences of the United States of America.
[22] Chee Kai Chua,et al. Porous polycaprolactone scaffold for cardiac tissue engineering fabricated by selective laser sintering. , 2010, Acta biomaterialia.
[23] Guoping Chen,et al. A hybrid network of synthetic polymer mesh and collagen sponge , 2000 .
[24] Mehdi Nikkhah,et al. Biomaterial Approaches for Stem Cell-Based Myocardial Tissue Engineering , 2015, Biomarker insights.
[25] Brian Derby,et al. Bioprinting: Inkjet printing proteins and hybrid cell-containing materials and structures , 2008 .
[26] Anthony Atala,et al. A 3D bioprinted complex structure for engineering the muscle–tendon unit , 2015, Biofabrication.
[27] T. Boland,et al. Inkjet printing of viable mammalian cells. , 2005, Biomaterials.
[28] Ali Khademhosseini,et al. Dermal Patch with Integrated Flexible Heater for on Demand Drug Delivery , 2016, Advanced healthcare materials.
[29] R. Ritchie,et al. Bioinspired structural materials. , 2014, Nature materials.
[30] Ali Khademhosseini,et al. A toolkit of thread-based microfluidics, sensors, and electronics for 3D tissue embedding for medical diagnostics , 2016, Microsystems & Nanoengineering.
[31] Ali Khademhosseini,et al. Directed endothelial cell morphogenesis in micropatterned gelatin methacrylate hydrogels. , 2012, Biomaterials.
[32] Ursula Graf-Hausner,et al. Standardized 3D Bioprinting of Soft Tissue Models with Human Primary Cells , 2016, Journal of laboratory automation.
[33] D. Mooney,et al. Synthetic niche to modulate regenerative potential of MSCs and enhance skeletal muscle regeneration. , 2016, Biomaterials.
[34] Tao Xu,et al. High-Throughput Production of Single-Cell Microparticles Using an Inkjet Printing Technology , 2008 .
[35] Seeram Ramakrishna,et al. Biomaterials and scaffolds for ligament tissue engineering. , 2006, Journal of biomedical materials research. Part A.
[36] Takashi Ushida,et al. 3D culture of osteoblast‐like cells by unidirectional or oscillatory flow for bone tissue engineering , 2009, Biotechnology and bioengineering.
[37] F. Guillemot,et al. High-throughput laser printing of cells and biomaterials for tissue engineering. , 2010, Acta biomaterialia.
[38] Ali Khademhosseini,et al. PGS:Gelatin nanofibrous scaffolds with tunable mechanical and structural properties for engineering cardiac tissues. , 2013, Biomaterials.
[39] Stephen E. Jones,et al. Neural activation during response inhibition differentiates blast from mechanical causes of mild to moderate traumatic brain injury. , 2014, Journal of Neurotrauma.
[40] M. Ferguson,et al. Tissue engineering of replacement skin: the crossroads of biomaterials, wound healing, embryonic development, stem cells and regeneration , 2007, Journal of The Royal Society Interface.
[41] Ali Khademhosseini,et al. Engineered contractile skeletal muscle tissue on a microgrooved methacrylated gelatin substrate. , 2012, Tissue engineering. Part A.
[42] Hiroaki Nakamura,et al. Acceleration of peripheral nerve regeneration using nerve conduits in combination with induced pluripotent stem cell technology and a basic fibroblast growth factor drug delivery system. , 2014, Journal of biomedical materials research. Part A.
[43] S. Ahadian,et al. Hybrid hydrogel-aligned carbon nanotube scaffolds to enhance cardiac differentiation of embryoid bodies. , 2016, Acta biomaterialia.
[44] D. Hutmacher,et al. Reduced contraction of skin equivalent engineered using cell sheets cultured in 3D matrices. , 2006, Biomaterials.
[45] A. Perets,et al. Textile-templated electrospun anisotropic scaffolds for regenerative cardiac tissue engineering. , 2014, Biomaterials.
[46] P. Kannus. Structure of the tendon connective tissue , 2000, Scandinavian journal of medicine & science in sports.
[47] Joseph W Freeman,et al. Tissue engineering of the anterior cruciate ligament using a braid-twist scaffold design. , 2007, Journal of biomechanics.
[48] G. Pins,et al. Restoration of skeletal muscle defects with adult human cells delivered on fibrin microthreads. , 2011, Tissue engineering. Part A.
[49] Jean-François Ganghoffer,et al. A multilayer braided scaffold for Anterior Cruciate Ligament: mechanical modeling at the fiber scale. , 2012, Journal of the mechanical behavior of biomedical materials.
[50] M. Colina,et al. DNA deposition through laser induced forward transfer. , 2005, Biosensors & bioelectronics.
[51] Wei Wang,et al. Alginate/graphene oxide fibers with enhanced mechanical strength prepared by wet spinning , 2012 .
[52] Zsolt Bor,et al. Survival and proliferative ability of various living cell types after laser-induced forward transfer. , 2005, Tissue engineering.
[53] Elliot P. Douglas,et al. Bone structure and formation: A new perspective , 2007 .
[54] P. Dubruel,et al. The 3D printing of gelatin methacrylamide cell-laden tissue-engineered constructs with high cell viability. , 2014, Biomaterials.
[55] A. Khademhosseini,et al. Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs. , 2014, Lab on a chip.
[56] M. Nikkhah,et al. 3D Cardiac Microtissues Encapsulated with the Co‐Culture of Cardiomyocytes and Cardiac Fibroblasts , 2015, Advanced healthcare materials.
[57] Tao Xu,et al. Fabrication and characterization of bio-engineered cardiac pseudo tissues , 2009, Biofabrication.
[58] G. G. Stokes. "J." , 1890, The New Yale Book of Quotations.
[59] Wei Sun,et al. Biofabrication of a three-dimensional liver micro-organ as an in vitro drug metabolism model , 2010, Biofabrication.
[60] A. Boccaccini,et al. Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering. , 2006, Biomaterials.
[61] Shan-hui Hsu,et al. 3D bioprinting: A new insight into the therapeutic strategy of neural tissue regeneration , 2015, Organogenesis.
[62] Soon Hee Kim,et al. The effect of VEGF on the myogenic differentiation of adipose tissue derived stem cells within thermosensitive hydrogel matrices. , 2010, Biomaterials.
[63] Guohua Xu,et al. 3D artificial bones for bone repair prepared by computed tomography-guided fused deposition modeling for bone repair. , 2014, ACS applied materials & interfaces.
[64] Maurilio Marcacci,et al. Stem cells associated with macroporous bioceramics for long bone repair: 6- to 7-year outcome of a pilot clinical study. , 2007, Tissue engineering.
[65] J. Lewis,et al. 3D Bioprinting of Vascularized, Heterogeneous Cell‐Laden Tissue Constructs , 2014, Advanced materials.
[66] Nan Ma,et al. Laser printing of skin cells and human stem cells. , 2010, Tissue engineering. Part C, Methods.
[67] Farshid Guilak,et al. Functional properties of cell-seeded three-dimensionally woven poly(epsilon-caprolactone) scaffolds for cartilage tissue engineering. , 2010, Tissue engineering. Part A.
[68] James J. Yoo,et al. A 3D bioprinting system to produce human-scale tissue constructs with structural integrity , 2016, Nature Biotechnology.
[69] Anja Lode,et al. Direct Plotting of Three‐Dimensional Hollow Fiber Scaffolds Based on Concentrated Alginate Pastes for Tissue Engineering , 2013, Advanced healthcare materials.
[70] Christine E Schmidt,et al. Neural tissue engineering: strategies for repair and regeneration. , 2003, Annual review of biomedical engineering.
[71] K. Leong,et al. Rapid Prototyping: Principles and Applications (with Companion CD-ROM) , 2003 .
[72] Ofer Bar-Yosef,et al. 30,000-Year-Old Wild Flax Fibers , 2009, Science.
[73] D. Seliktar. Designing Cell-Compatible Hydrogels for Biomedical Applications , 2012, Science.
[74] R. Samanipour,et al. A simple and high-resolution stereolithography-based 3D bioprinting system using visible light crosslinkable bioinks , 2015, Biofabrication.
[75] C. Laurencin,et al. Novel matrix based anterior cruciate ligament (ACL) regeneration , 2010 .
[76] D. Kooy,et al. Stem and progenitor cells: the premature desertion of rigorous definitions , 2003, Trends in Neurosciences.
[77] U. Demirci,et al. Bioprinting for stem cell research. , 2013, Trends in biotechnology.
[78] Amir Sanati-Nezhad,et al. Skin Diseases Modeling using Combined Tissue Engineering and Microfluidic Technologies , 2016, Advanced healthcare materials.
[79] Rui L Reis,et al. New biotextiles for tissue engineering: development, characterization and in vitro cellular viability. , 2013, Acta biomaterialia.
[80] N. Jones. Science in three dimensions: The print revolution , 2012, Nature.
[81] Siew Lok Toh,et al. A bFGF-releasing silk/PLGA-based biohybrid scaffold for ligament/tendon tissue engineering using mesenchymal progenitor cells. , 2010, Biomaterials.
[82] Mark A. Skylar-Scott,et al. Three-dimensional bioprinting of thick vascularized tissues , 2016, Proceedings of the National Academy of Sciences.
[83] David J. Mooney,et al. Biomaterials based strategies for skeletal muscle tissue engineering: existing technologies and future trends. , 2015, Biomaterials.
[84] C. Vaquette,et al. Aligned poly(L-lactic-co-e-caprolactone) electrospun microfibers and knitted structure: a novel composite scaffold for ligament tissue engineering. , 2010, Journal of biomedical materials research. Part A.
[85] Ung-Jin Kim,et al. In vitro cartilage tissue engineering with 3D porous aqueous-derived silk scaffolds and mesenchymal stem cells. , 2005, Biomaterials.
[86] Woong-Ryeol Yu,et al. 3D braid scaffolds for regeneration of articular cartilage. , 2014, Journal of the mechanical behavior of biomedical materials.
[87] Fabien Guillemot,et al. Laser-assisted cell printing: principle, physical parameters versus cell fate and perspectives in tissue engineering. , 2010, Nanomedicine.
[88] Y U Lee,et al. 3D‐Printed Biodegradable Polymeric Vascular Grafts , 2016, Advanced healthcare materials.
[89] Wan-Ju Li,et al. Braided nanofibrous scaffold for tendon and ligament tissue engineering. , 2013, Tissue engineering. Part A.
[90] P. Vogt,et al. Tissue Engineered Skin Substitutes Created by Laser-Assisted Bioprinting Form Skin-Like Structures in the Dorsal Skin Fold Chamber in Mice , 2013, PloS one.
[91] Eric D. Miller,et al. Engineered spatial patterns of FGF-2 immobilized on fibrin direct cell organization. , 2005, Biomaterials.
[92] Ryan Wicker,et al. Stereolithography of spatially controlled multi-material bioactive poly(ethylene glycol) scaffolds. , 2010, Acta biomaterialia.
[93] Milos Pekny,et al. A novel method for three-dimensional culture of central nervous system neurons. , 2014, Tissue engineering. Part C, Methods.
[94] A. Zhang,et al. Digital microfabrication of user‐defined 3D microstructures in cell‐laden hydrogels , 2013, Biotechnology and bioengineering.
[95] Ali Navaei,et al. Gold nanorod-incorporated gelatin-based conductive hydrogels for engineering cardiac tissue constructs. , 2016, Acta biomaterialia.
[96] I Zein,et al. Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling. , 2001, Journal of biomedical materials research.
[97] J. Qin,et al. Simple Spinning of Heterogeneous Hollow Microfibers on Chip , 2016, Advanced materials.
[98] Junzo Tanaka,et al. Culturing of skin fibroblasts in a thin PLGA-collagen hybrid mesh. , 2005, Biomaterials.
[99] Ivan Martin,et al. Silk matrix for tissue engineered anterior cruciate ligaments. , 2002, Biomaterials.
[100] Boyang Zhang,et al. Platform technology for scalable assembly of instantaneously functional mosaic tissues , 2015, Science Advances.
[101] David Juncker,et al. Microfluidic direct writer with integrated declogging mechanism for fabricating cell-laden hydrogel constructs , 2014, Biomedical microdevices.
[102] F. Melchels,et al. A review on stereolithography and its applications in biomedical engineering. , 2010, Biomaterials.
[103] Masatoshi Sato,et al. Reconstruction of rabbit Achilles tendon with three bioabsorbable materials: histological and biomechanical studies , 2000, Journal of orthopaedic science : official journal of the Japanese Orthopaedic Association.
[104] Guoping Chen,et al. The influence of structural design of PLGA/collagen hybrid scaffolds in cartilage tissue engineering. , 2010, Biomaterials.
[105] Shruti V. Kabadi,et al. CR8, a Novel Inhibitor of CDK, Limits Microglial Activation, Astrocytosis, Neuronal Loss, and Neurologic Dysfunction after Experimental Traumatic Brain Injury , 2014, Journal of cerebral blood flow and metabolism : official journal of the International Society of Cerebral Blood Flow and Metabolism.
[106] Michael P. O’Donnell,et al. Axon growth and guidance: receptor regulation and signal transduction. , 2009, Annual review of neuroscience.
[107] Satyajit Patra,et al. A Review of 3D Printing Techniques and the Future in Biofabrication of Bioprinted Tissue , 2016, Cell Biochemistry and Biophysics.
[108] Marc E. Nelson,et al. Bioresorbable airway splint created with a three-dimensional printer. , 2013, The New England journal of medicine.
[109] Farshid Guilak,et al. Multifunctional hybrid three-dimensionally woven scaffolds for cartilage tissue engineering. , 2010, Macromolecular bioscience.
[110] Alessandro Giacomello,et al. Cardiac tissue engineering using tissue printing technology and human cardiac progenitor cells. , 2012, Biomaterials.
[111] Lisa E. Freed,et al. Accordion-Like Honeycombs for Tissue Engineering of Cardiac Anisotropy , 2008, Nature materials.
[112] Mark D. Miller,et al. Bone-patella tendon-bone autograft anterior cruciate ligament reconstruction. , 2007, Clinics in sports medicine.
[113] Manabu Mizutani,et al. Molecular Design of Photocurable Liquid Biodegradable Copolymers. 1. Synthesis and Photocuring Characteristics , 2000 .
[114] Anthony Atala,et al. In situ bioprinting of the skin for burns , 2010 .
[115] Herman H. Vandenburgh,et al. Maintenance of highly contractile tissue-cultured avian skeletal myotubes in collagen gel , 1988, In Vitro Cellular & Developmental Biology.
[116] Dai Fukumura,et al. Engineering vascularized tissue , 2005, Nature Biotechnology.
[117] Tien-Min G. Chu,et al. CT-generated porous hydroxyapatite orbital floor prosthesis as a prototype bioimplant. , 1997, AJNR. American journal of neuroradiology.
[118] Bruce K Milthorpe,et al. Engineering thick tissues--the vascularisation problem. , 2007, European cells & materials.
[119] Xiaofeng Cui,et al. Application of inkjet printing to tissue engineering , 2006, Biotechnology journal.
[120] Ali Khademhosseini,et al. Engineering functional epithelium for regenerative medicine and in vitro organ models: a review. , 2013, Tissue engineering. Part B, Reviews.
[121] A. Khademhosseini,et al. Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink , 2016, Advanced materials.
[122] Peter Niederer,et al. Three-dimensional architecture of the left ventricular myocardium. , 2006, The anatomical record. Part A, Discoveries in molecular, cellular, and evolutionary biology.
[123] Keekyoung Kim,et al. 3D bioprinting for engineering complex tissues. , 2016, Biotechnology advances.
[124] Ozan Akkus,et al. Tenogenic Induction of Human MSCs by Anisotropically Aligned Collagen Biotextiles , 2014, Advanced functional materials.
[125] Eric D. Miller,et al. Microenvironments Engineered by Inkjet Bioprinting Spatially Direct Adult Stem Cells Toward Muscle‐ and Bone‐Like Subpopulations , 2008, Stem cells.
[126] Sophie C Cox,et al. 3D printing of porous hydroxyapatite scaffolds intended for use in bone tissue engineering applications. , 2015, Materials science & engineering. C, Materials for biological applications.
[127] B. Duan,et al. 3D bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels. , 2013, Journal of biomedical materials research. Part A.
[128] Zhongze Gu,et al. Controlled Fabrication of Bioactive Microfibers for Creating Tissue Constructs Using Microfluidic Techniques. , 2016, ACS applied materials & interfaces.
[129] C. Wilkinson,et al. The control of human mesenchymal cell differentiation using nanoscale symmetry and disorder. , 2007, Nature materials.
[130] L. Niklason,et al. Scaffold-free vascular tissue engineering using bioprinting. , 2009, Biomaterials.
[131] Jae Nam,et al. Direct cell writing of 3D microorgan for in vitro pharmacokinetic model. , 2008, Tissue engineering. Part C, Methods.
[132] G. Wallace,et al. Knitted Carbon-Nanotube-Sheath/Spandex-Core Elastomeric Yarns for Artificial Muscles and Strain Sensing. , 2016, ACS nano.
[133] Ali Khademhosseini,et al. Textile Technologies and Tissue Engineering: A Path Toward Organ Weaving , 2016, Advanced healthcare materials.
[134] Douglas B. Chrisey,et al. Application of laser printing to mammalian cells , 2004 .
[135] A. Wagers,et al. Stem cells for skeletal muscle repair , 2011, Philosophical Transactions of the Royal Society B: Biological Sciences.
[136] Vamsi Krishna Balla,et al. Microwave‐sintered 3D printed tricalcium phosphate scaffolds for bone tissue engineering , 2013, Journal of tissue engineering and regenerative medicine.
[137] W. Sun,et al. Bioprinting cell-laden matrigel for radioprotection study of liver by pro-drug conversion in a dual-tissue microfluidic chip , 2011, Biofabrication.
[138] J. Knowles,et al. Sequential identification of a degradable phosphate glass scaffold for skeletal muscle regeneration , 2014, Journal of tissue engineering and regenerative medicine.
[139] Peter Popper,et al. Some recent advances in the fabrication and design of three-dimensional textile preforms: a review , 2000 .
[140] Takashi Ushida,et al. Collagen hybridization with poly(l-lactic acid) braid promotes ligament cell migration , 2001 .
[141] Vahid Hosseini,et al. Skeletal Muscle Tissue Engineering: Methods to Form Skeletal Myotubes and Their Applications , 2014 .
[142] D. Odde,et al. Laser-guided direct writing for applications in biotechnology. , 1999, Trends in biotechnology.
[143] Joseph W Freeman,et al. Fiber-based tissue-engineered scaffold for ligament replacement: design considerations and in vitro evaluation. , 2005, Biomaterials.
[144] Karl R Edminster,et al. Multi-layered culture of human skin fibroblasts and keratinocytes through three-dimensional freeform fabrication. , 2009, Biomaterials.
[145] A Ranella,et al. Direct laser writing of 3D scaffolds for neural tissue engineering applications , 2011, Biofabrication.
[146] Dong-Woo Cho,et al. Biofabrication: reappraising the definition of an evolving field , 2016, Biofabrication.
[147] Nan Ma,et al. Patterning human stem cells and endothelial cells with laser printing for cardiac regeneration. , 2011, Biomaterials.
[148] D. D’Lima,et al. Direct human cartilage repair using three-dimensional bioprinting technology. , 2012, Tissue engineering. Part A.
[149] Wim E Hennink,et al. 25th Anniversary Article: Engineering Hydrogels for Biofabrication , 2013, Advanced materials.
[150] Steve Weiner,et al. THE MATERIAL BONE: Structure-Mechanical Function Relations , 1998 .
[151] Jia-Horng Lin,et al. Evaluation of a multi-layer microbraided polylactic acid fiber-reinforced conduit for peripheral nerve regeneration , 2009, Journal of materials science. Materials in medicine.
[152] Liu Yang,et al. Type I collagen and polyvinyl alcohol blend fiber scaffold for anterior cruciate ligament reconstruction , 2013, Biomedical materials.
[153] W. Comper,et al. Physiological function of connective tissue polysaccharides. , 1978, Physiological reviews.
[154] Ryan B. Wicker,et al. Stereolithography of Three-Dimensional Bioactive Poly(Ethylene Glycol) Constructs with Encapsulated Cells , 2006, Annals of Biomedical Engineering.
[155] Tal Dvir,et al. Nanotechnological strategies for engineering complex tissues. , 2020, Nature nanotechnology.
[156] Li-Hsin Han,et al. Fabrication of three-dimensional scaffolds for heterogeneous tissue engineering , 2010, Biomedical microdevices.
[157] Michael S Jaffee,et al. Posttraumatic stress disorder and posttraumatic stress disorder-like symptoms and mild traumatic brain injury. , 2007, Journal of rehabilitation research and development.
[158] Stéphanie Houis,et al. A poly(lactic acid-co-caprolactone)-collagen hybrid for tissue engineering applications. , 2009, Tissue engineering. Part A.
[159] Yan Wang,et al. The predominant role of collagen in the nucleation, growth, structure and orientation of bone apatite. , 2012, Nature materials.
[160] Zheng-Ming Huang,et al. The mechanical properties of composites reinforced with woven and braided fabrics , 2000 .
[161] Farshid Guilak,et al. A biomimetic three-dimensional woven composite scaffold for functional tissue engineering of cartilage. , 2007, Nature materials.
[162] Bradley R Ringeisen,et al. Jet‐based methods to print living cells , 2006, Biotechnology journal.
[163] W Cris Wilson,et al. Cell and organ printing 1: protein and cell printers. , 2003, The anatomical record. Part A, Discoveries in molecular, cellular, and evolutionary biology.
[164] F. Guillemot,et al. Laser assisted bioprinting of engineered tissue with high cell density and microscale organization. , 2010, Biomaterials.
[165] Jordan Grafman,et al. Neural correlates of apathy revealed by lesion mapping in participants with traumatic brain injuries , 2014, Human brain mapping.
[166] C. Golding,et al. Design of textile scaffolds for tissue engineering: the use of biodegradable yarns , 2004 .
[167] Anthony Atala,et al. Tissue engineering of human bladder. , 2011, British medical bulletin.
[168] Jeff W Lichtman,et al. Functional muscle regeneration with combined delivery of angiogenesis and myogenesis factors , 2009, Proceedings of the National Academy of Sciences.
[169] B. Derby,et al. Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing. , 2008, Biomaterials.
[170] Patrick J. Smith,et al. Inkjet printing Schwann cells and neuronal analogue NG108-15 cells , 2016, Biofabrication.
[171] Ali Khademhosseini,et al. Skeletal muscle tissue engineering: methods to form skeletal myotubes and their applications. , 2014, Tissue engineering. Part B, Reviews.
[172] Ali Khademhosseini,et al. Fiber-based tissue engineering: Progress, challenges, and opportunities. , 2013, Biotechnology advances.
[173] Gerard Riedy,et al. Postconcussional disorder and PTSD symptoms of military‐related traumatic brain injury associated with compromised neurocircuitry , 2014, Human brain mapping.
[174] A. Khademhosseini,et al. Composite Living Fibers for Creating Tissue Constructs Using Textile Techniques , 2014, Advanced functional materials.
[175] Guoping Chen,et al. The use of a novel PLGA fiber/collagen composite web as a scaffold for engineering of articular cartilage tissue with adjustable thickness. , 2003, Journal of biomedical materials research. Part A.
[176] Lei Yang. From fibroblast cells to cardiomyocytes: direct lineage reprogramming , 2011, Stem Cell Research & Therapy.
[177] Vladimir Mironov,et al. Organ printing: tissue spheroids as building blocks. , 2009, Biomaterials.
[178] J. Suh,et al. Application of chitosan-based polysaccharide biomaterials in cartilage tissue engineering: a review. , 2000, Biomaterials.
[179] Deok‐Ho Kim,et al. Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink , 2014, Nature Communications.
[180] Marco Rasponi,et al. Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip. , 2016, Biomaterials.
[181] David L Kaplan,et al. Tissue engineering of ligaments. , 2004, Annual review of biomedical engineering.
[182] Thomas Eschenhagen,et al. Engineering Myocardial Tissue , 2005, Circulation research.
[183] Qing He,et al. Porous chitosan tubular scaffolds with knitted outer wall and controllable inner structure for nerve tissue engineering. , 2006, Journal of biomedical materials research. Part A.
[184] S. Hsu,et al. 3D bioprinting of neural stem cell-laden thermoresponsive biodegradable polyurethane hydrogel and potential in central nervous system repair. , 2015, Biomaterials.
[185] Horst Fischer,et al. Controlling Shear Stress in 3D Bioprinting is a Key Factor to Balance Printing Resolution and Stem Cell Integrity , 2016, Advanced healthcare materials.
[186] Peihua Zhang,et al. Design and properties of a new braided poly lactic-co-glycolic acid catheter for peripheral nerve regeneration , 2015 .
[187] Michael C. McAlpine,et al. 3D Printed Anatomical Nerve Regeneration Pathways , 2015, Advanced functional materials.
[188] V Mironov,et al. Biofabrication: a 21st century manufacturing paradigm , 2009, Biofabrication.
[189] D. Odde,et al. Laser-guided direct writing of living cells. , 2000, Biotechnology and bioengineering.
[190] T. Boland,et al. Human microvasculature fabrication using thermal inkjet printing technology. , 2009, Biomaterials.
[191] Tao Xu,et al. Viability and electrophysiology of neural cell structures generated by the inkjet printing method. , 2006, Biomaterials.
[192] K. Clark,et al. Apparent Decline of the Golden Toad: Underground or Extinct? , 1992 .
[193] S. Willerth,et al. Approaches to neural tissue engineering using scaffolds for drug delivery. , 2007, Advanced drug delivery reviews.
[194] Jason A Inzana,et al. 3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration. , 2014, Biomaterials.
[195] Anthony Atala,et al. 3D bioprinting of tissues and organs , 2014, Nature Biotechnology.
[196] Julia Will,et al. Porous ceramic bone scaffolds for vascularized bone tissue regeneration , 2008, Journal of materials science. Materials in medicine.
[197] S. Bersini,et al. A 3D vascularized bone remodeling model combining osteoblasts and osteoclasts in a CaP nanoparticle-enriched matrix. , 2016, Nanomedicine.
[198] Y. S. Zhang,et al. Graphene-based materials for tissue engineering. , 2016, Advanced drug delivery reviews.
[199] Liping Tang,et al. Synthesis and characterization of a biodegradable elastomer featuring a dual crosslinking mechanism. , 2010, Soft matter.
[200] P. Mali,et al. Efficient Generation of Functional Dopaminergic Neurons from Human Induced Pluripotent Stem Cells Under Defined Conditions , 2010, Stem cells.
[201] D. Seidel. Cinchona Alkaloids in Synthesis & Catalysis: Ligands, Immobilization and Organocatalysis Cinchona Alkaloids in Synthesis & Catalysis: Ligands, Immobilization and Organocatalysis . Edited by Choong Eui Song (Sungkyunkwan University, Suwon, Republik Korea). WILEY-VCH Verlag GmbH & Co. KGaA: Weinheim. , 2010 .
[202] Leo Q Wan,et al. A hydrogel-mineral composite scaffold for osteochondral interface tissue engineering. , 2012, Tissue engineering. Part A.
[203] Hyoungshin Park,et al. Mechanical properties and remodeling of hybrid cardiac constructs made from heart cells, fibrin, and biodegradable, elastomeric knitted fabric. , 2005, Tissue engineering.
[204] R V Bellamkonda,et al. Polylysine-functionalised thermoresponsive chitosan hydrogel for neural tissue engineering. , 2007, Biomaterials.
[205] Thomas C. Ferrante,et al. A combinatorial cell-laden gel microarray for inducing osteogenic differentiation of human mesenchymal stem cells , 2014, Scientific Reports.
[206] Jeffrey S. Smith,et al. Combining enriched environment and induced pluripotent stem cell therapy results in improved cognitive and motor function following traumatic brain injury. , 2014, Restorative neurology and neuroscience.
[207] Birgit Glasmacher,et al. Laser printing of stem cells for biofabrication of scaffold-free autologous grafts. , 2011, Tissue engineering. Part C, Methods.
[208] John F. Kennedy,et al. Alginate fibres modified with unhydrolysed and hydrolysed chitosans for wound dressings , 2004 .
[209] Nigel P Hunt,et al. Development of a novel smart scaffold for human skeletal muscle regeneration , 2016, Journal of tissue engineering and regenerative medicine.
[210] Rainer Schmelzeisen,et al. Fabrication of soft tissue engineering scaffolds by means of rapid prototyping techniques , 2002 .
[211] Farshid Guilak,et al. Composite Three‐Dimensional Woven Scaffolds with Interpenetrating Network Hydrogels to Create Functional Synthetic Articular Cartilage , 2013, Advanced functional materials.
[212] S. Ramakrishna,et al. Electrospinning of nano/micro scale poly(L-lactic acid) aligned fibers and their potential in neural tissue engineering. , 2005, Biomaterials.
[213] Yuki Kanno,et al. Maxillofacial reconstruction using custom-made artificial bones fabricated by inkjet printing technology , 2009, Journal of Artificial Organs.
[214] N. Kuboyama,et al. A biodegradable porous composite scaffold of PGA/beta-TCP for bone tissue engineering. , 2010, Bone.
[215] I. Morita,et al. Biocompatible inkjet printing technique for designed seeding of individual living cells. , 2005, Tissue engineering.
[216] Costas Fotakis,et al. Directed three-dimensional patterning of self-assembled peptide fibrils. , 2008, Nano letters.
[217] T. Hasan,et al. A three-dimensional in vitro ovarian cancer coculture model using a high-throughput cell patterning platform. , 2011, Biotechnology journal.
[218] Baolin Guo,et al. Nanofiber Yarn/Hydrogel Core-Shell Scaffolds Mimicking Native Skeletal Muscle Tissue for Guiding 3D Myoblast Alignment, Elongation, and Differentiation. , 2015, ACS nano.
[219] S. Gerecht,et al. Acellular hydrogel for regenerative burn wound healing: translation from a porcine model , 2015, The Journal of investigative dermatology.
[220] Panagiotis Maghsoudlou,et al. Skeletal muscle tissue engineering: which cell to use? , 2013, Tissue engineering. Part B, Reviews.
[221] Jean J. Zhao,et al. Bioprinting for cancer research. , 2015, Trends in biotechnology.
[222] Y. S. Zhang,et al. Reduced Graphene Oxide-GelMA Hybrid Hydrogels as Scaffolds for Cardiac Tissue Engineering. , 2016, Small.
[223] Elaine Fuchs,et al. Getting under the skin of epidermal morphogenesis , 2002, Nature Reviews Genetics.
[224] S. Willerth,et al. Neural tissue engineering using embryonic and induced pluripotent stem cells , 2011, Stem Cell Research & Therapy.
[225] Ali Khademhosseini,et al. Tough and flexible CNT-polymeric hybrid scaffolds for engineering cardiac constructs. , 2014, Biomaterials.