Isothermal Crystallization Kinetics of Highly Filled Wood Plastic Composites: Effect of Wood Particles Content and Compatibilizer

The isothermal crystallization behavior and crystal structure of the polypropylene (PP) component in wood plastic composites (WPC) with respect to wood particle content and maleic anhydride-grafted polypropylene (MAHPP) compatibilizer were studied by means of polarized optical microscopy, scanning electron microscopy, x-ray diffraction, and differential scanning calorimetry. It was found that under the experimental conditions of this research, the speed of crystallization of PP was faster in WPC with MAHPP than in composites without MAHPP. This is ascribed to the difference in undercooling due to the change in the equilibrium melting temperatures (T 0 m ) of the PP component in WPC due to the addition of wood flour and MAHPP compatibilizer. T 0 m decreased with the increase of wood particle content, and it decreased more severely with the addition of wood flour than the addition of compatibilizer. The half-crystallization time was the smallest in PP/wood composites, intermediate in PP/wood/compatibilizer system, and the largest in pure PP under the same undercooling. The fast crystallization in PP/wood composites is ascribed to the heterogeneous nucleation effects of wood particles, which could be hindered by the MAHPP compatibilizers; this was verified by the higher fold surface free energy in WPC with compatibilizer than in WPC without compatibilizer.

[1]  Sangyeob Lee,et al.  Influence of surface morphology of the kraft pulp fibers on the growth of the transcrystalline layer of polypropylene , 2010 .

[2]  Lívia Dányádi,et al.  Effect of various surface modifications of wood flour on the properties of PP/wood composites , 2010 .

[3]  Fabrizio Sarasini,et al.  Acoustic emission for monitoring the mechanical behaviour of natural fibre composites: A literature review , 2009 .

[4]  P. Perré,et al.  Wood particle/high-density polyethylene composites: Thermal sensitivity and nucleating ability of wood particles , 2009 .

[5]  D. Harper,et al.  Effect of Wood Species on the Mechanical and Thermal Properties of Wood-Plastic Composites , 2009 .

[6]  M. A. Gómez,et al.  Analysis of the isothermal crystallization of polypropylene/wood flour composites , 2008 .

[7]  Mehdi Tajvidi,et al.  Mechanical properties of wood plastic composite panels made from waste fiberboard and particleboard , 2008 .

[8]  A. Ashori,et al.  Fundamental studies on wood–plastic composites: Effects of fiber concentration and mixing temperature on the mechanical properties of poplar/PP composite , 2008 .

[9]  T. Okamoto,et al.  Wood/Plastic Composite of High Filler Content , 2008 .

[10]  A. Behravesh,et al.  Flow Behavior of HDPE-Fine Wood Particles Composites , 2007 .

[11]  J. Móczó,et al.  Wood flour filled polypropylene composites : Interfacial adhesion and micromechanical deformations , 2007 .

[12]  Rashmi Kumari,et al.  Fundamental studies on wood/cellulose-plastic composites: effects of composition and cellulose dimension on the properties of cellulose/PP composite , 2007, Journal of Wood Science.

[13]  S. Borysiak.  Determination of nucleating ability ofwood for non-isothermal crystallisation of polypropylene , 2007 .

[14]  Bin Yang,et al.  Isothermal cold crystallization kinetics of polylactide/nucleating agents , 2007 .

[15]  J. Simonsen,et al.  Effect of compatibilizers on the crystallization kinetics of cellulose-filled high density polyethylene , 2007 .

[16]  Yong Zhang,et al.  Crystallization, melting behavior, and morphology of PP/Novolac blends , 2006 .

[17]  Wei Yu,et al.  Crystallization Kinetics of Linear and Long‐Chain Branched Polypropylene , 2006 .

[18]  Hongbing Lu,et al.  Isothermal crystallization kinetics of poly(butylene terephthalate)/attapulgite nanocomposites , 2006 .

[19]  K. Oksman,et al.  The Effect of Morphology and Chemical Characteristics of Cellulose Reinforcements on the Crystallinity of Polylactic Acid , 2006 .

[20]  B. Doczekalska,et al.  Influence of chemical modification of wood on the crystallisation of polypropylene , 2006, Holz als Roh- und Werkstoff.

[21]  C. Carrot,et al.  Rheology as a tool for the analysis of the dispersion of carbon filler in polymers , 2006 .

[22]  Stephen Z. D. Cheng,et al.  Enthalpic and entropic origins of nucleation barriers during polymer crystallization: the Hoffman–Lauritzen theory and beyond , 2005 .

[23]  Yong Zhang,et al.  Isothermal crystallization kinetics of PP in PP/Mg(OH)2 composites , 2005 .

[24]  N. Sombatsompop,et al.  Influence of Type and Concentration of Maleic Anhydride Grafted Polypropylene and Impact Modifiers on Mechanical Properties of PP/Wood Sawdust Composites , 2005 .

[25]  M. Wolcott,et al.  Rheology of wood plastics melt. Part 1. Capillary rheometry of HDPE filled with maple , 2005 .

[26]  W. Fan,et al.  Thermal and crystallization behavior of silane-crosslinked polypropylene , 2005 .

[27]  M. Wolcott,et al.  Interaction between coupling agent and lubricants in wood–polypropylene composites , 2004 .

[28]  J. Kenny,et al.  Rheology of particle suspensions in viscoelastic media. Wood flour-polypropylene melt , 2004 .

[29]  M. Arroyo,et al.  Composites based on PP/EPDM blends and aramid short fibres. Morphology/behaviour relationship , 2000 .

[30]  P. Supaphol,et al.  Application of the Avrami, Tobin, Malkin, and Simultaneous Avrami Macrokinetic Models to Isothermal Crystallization of Syndiotactic Polypropylenes , 2000 .

[31]  Feng-kui Li,et al.  Crystallization and melting behavior of polypropylene and maleated polypropylene blends , 1999 .

[32]  M. Arroyo,et al.  Crystallization kinetics of polypropylene : II. Effect of the addition of short glass fibres , 1997 .

[33]  S. Radhakrishnan,et al.  Effect of CaCO3 on the crystallization behaviour of polypropylene , 1996 .

[34]  J. Saja,et al.  Crystallization behavior of polypropylene filled with surface‐modified talc , 1996 .