Recent advances in vegetable oil-based polyurethanes.
暂无分享,去创建一个
[1] Charlotte K. Williams,et al. Polymers from Renewable Resources: A Perspective for a Special Issue of Polymer Reviews , 2008 .
[2] V. Cádiz,et al. Poly(ether urethane) networks from renewable resources as candidate biomaterials: synthesis and characterization. , 2007, Biomacromolecules.
[3] Yongshang Lu,et al. Soybean-oil-based waterborne polyurethane dispersions: effects of polyol functionality and hard segment content on properties. , 2008, Biomacromolecules.
[4] S. Narine,et al. Sequential interpenetrating polymer networks produced from vegetable oil based polyurethane and poly(methyl methacrylate). , 2008, Biomacromolecules.
[5] Z. Petrović,et al. Primary Hydroxyl Content of Soybean Polyols , 2008 .
[6] Eric Cloutet,et al. Polyurethane nanoparticles from a natural polyol via miniemulsion technique , 2006 .
[7] Siddaramaiah,et al. Biobased chain extended polyurethane and its composites with silk fiber , 2010 .
[8] L. A. Goldblatt,et al. Solvent-blown, rigid urethane foams from low cost castor oil-polyol mixtures , 1962 .
[9] S. Narine,et al. Physical Properties of Polyurethanes Produced from Polyols from Seed Oils: I. Elastomers , 2007 .
[10] Wei Zhang,et al. Network structure and properties of polyurethanes from soybean oil , 2007 .
[11] H. Cramail,et al. Solubility in CO2 and carbonation studies of epoxidized fatty acid diesters: towards novel precursors for polyurethane synthesis , 2010 .
[12] R. Larock,et al. Castor oil-based thermosets with varied crosslink densities prepared by ring-opening metathesis polymerization (ROMP) , 2010 .
[13] R.V. Silva,et al. Thermal, Mechanical, and Hygroscopic Behavior of Sisal Fiber/Polyurethane Resin-based Composites , 2010 .
[14] V. Cádiz,et al. Development of novel phosphorus‐containing epoxy resins from renewable resources , 2006 .
[15] T. L. Ooi,et al. Synthesis of Palm Oil-Based Diethanolamides , 2007 .
[16] Ping Wang,et al. A novel vegetable oil–lactate hybrid monomer for synthesis of high‐Tg polyurethanes , 2010 .
[17] S. Narine,et al. Polyurethanes from benzene polyols synthesized from vegetable oils: Dependence of physical properties on structure , 2010 .
[18] J. A. Posada,et al. Preparation and Properties of Polyurethanes based on Castor Oil Chemically Modified with Yucca Starch Glycoside , 2009 .
[19] S. Narine,et al. Synthesis and characterization of highly functionalized symmetric aromatic hexa-ol intermediates from oleic acid. , 2008, Chemistry and physics of lipids.
[20] Siddaramaiah,et al. Structure-property relationship of castor oil based diol chain extended polyurethanes (PUs) , 2003 .
[21] Hans J. Schäfer,et al. Neue Synthesen mit Ölen und Fetten als nachwachsende Rohstoffe für die chemische Industrie , 2000 .
[22] Wei Zhang,et al. Structure and properties of polyurethanes prepared from triglyceride polyols by ozonolysis. , 2005, Biomacromolecules.
[23] M. Meier,et al. Metathesis as a versatile tool in oleochemistry , 2008 .
[24] S. Kamarudin,et al. Effect of Compactabilization of Polymer on the Properties of Polyurethane-Palm Fiber Composites , 2009 .
[25] Gökhan Çaylı,et al. Biobased polyisocyanates from plant oil triglycerides: Synthesis, polymerization, and characterization , 2008 .
[26] I. Javni,et al. Polyurethane networks from polyols obtained by hydroformylation of soybean oil , 2008 .
[27] Chengshuang Wang,et al. Synthesis and Characterization of the Different Soy-Based Polyols by Ring Opening of Epoxidized Soybean Oil with Methanol, 1,2-Ethanediol and 1,2-Propanediol , 2009 .
[28] S. Narine,et al. Synthesis of aromatic triols and triacids from oleic and erucic acid: separation and characterization of the asymmetric and symmetric isomers. , 2008, Chemistry and physics of lipids.
[29] A. P. Costa,et al. Polyurethane networks from formiated soy polyols: Synthesis and mechanical characterization , 2005 .
[30] S. Oprea. Synthesis and Properties of the Porous Collagen/Polyurethane Composite , 2010 .
[31] Ivan Javni,et al. Thermal and mechanical properties of glass reinforced soy-based polyurethane composites , 2005 .
[32] N. Karak,et al. Synthesis, characterization of poly(urethane amide) resins from Nahar seed oil for surface coating applications , 2005 .
[33] V. Cádiz,et al. Polyurethane networks from fatty-acid-based aromatic triols: synthesis and characterization. , 2007, Biomacromolecules.
[34] S. Narine,et al. Production of Polyols from Canola Oil and their Chemical Identification and Physical Properties , 2007 .
[35] S. Das,et al. Morphology and properties of thermoplastic polyurethanes with dangling chains in ricinoleate-based soft segments , 2008 .
[36] H. Cramail,et al. Synthesis of biobased polyurethane from oleic and ricinoleic acids as the renewable resources via the AB-type self-condensation approach. , 2010, Biomacromolecules.
[37] S. Narine,et al. Novel Long Chain Unsaturated Diisocyanate from Fatty Acid: Synthesis, Characterization, and Application in Bio-Based Polyurethane , 2010 .
[38] Andrew Guo,et al. The hydroformylation of vegetable oils and model compounds by ligand modified rhodium catalysis , 2002 .
[39] Gel point prediction of metal‐filled castor oil‐based polyurethanes system , 2002 .
[40] G. Wilkes,et al. Characterization of soy‐based polyurethane networks prepared with different diisocyanates and their blends with petroleum‐based polyols , 2007 .
[41] R. Narayan,et al. Ozone-mediated polyol synthesis from soybean oil , 2005 .
[42] S. Ahmad,et al. Synthesis, characterization, antibacterial and corrosion protective properties of epoxies, epoxy-polyols and epoxy-polyurethane coatings from linseed and Pongamia glabra seed oils. , 2007, International journal of biological macromolecules.
[43] Ying Xia,et al. Vegetable oil-based polymeric materials: synthesis, properties, and applications , 2010 .
[44] Anupama Kaushik,et al. Synthesis and Characterization of Castor Oil/Trimethylol Propane Polyol as Raw Materials for Polyurethanes Using Time-of-Flight Mass Spectroscopy , 2005 .
[45] Wei Zhang,et al. Polyester polyols and polyurethanes from ricinoleic acid , 2008 .
[46] Hatice Mutlu,et al. Castor oil as a renewable resource for the chemical industry , 2010 .
[47] Siddaramaiah,et al. Mechanical, Thermal and Morphological Behaviors of Castor Oil Based PU/PS Interpenetrating Polymer Network-Metakaolin Composites , 2010 .
[48] V. Athawale,et al. Chemoenzymatic synthesis of urethane oil based on special functional group oil , 1998 .
[49] N. Marcovich,et al. Polyurethane Foams Obtained from Castor Oil-based Polyol and Filled with Wood Flour , 2009 .
[50] N. Marcovich,et al. Polyurethanes from tung oil: Polymer characterization and composites , 2009 .
[51] Q. Lu,et al. Differentiation of bulk and surface contribution to supercapacitance in amorphous and crystalline NiO. , 2010, ChemSusChem.
[52] S. Narine,et al. Functional thermoplastics from linear diols and diisocyanates produced entirely from renewable lipid sources. , 2010, Biomacromolecules.
[53] L. Avérous,et al. Polyurethanes Based on Castor Oil: Kinetics, Chemical, Mechanical and Thermal Properties , 2008 .
[54] D S Ogunniyi,et al. Castor oil: a vital industrial raw material. , 2006, Bioresource technology.
[55] V. Cádiz,et al. Novel silicon-containing polyurethanes from vegetable oils as renewable resources. Synthesis and properties. , 2006, Biomacromolecules.
[56] N. Karak,et al. Effect of the NCO/OH ratio on the properties of Mesua Ferrea L. seed oil‐modified polyurethane resins , 2006 .
[57] Yongshang Lu,et al. Soybean oil-based, aqueous cationic polyurethane dispersions: Synthesis and properties , 2010 .
[58] S. Narine,et al. Physical properties of polyurethane plastic sheets produced from polyols from canola oil. , 2007, Biomacromolecules.
[59] G. Wilkes,et al. Incorporation of carbon dioxide into soybean oil and subsequent preparation and studies of nonisocyanate polyurethane networks , 2004 .
[60] L. A. Goldblatt,et al. Rigid urethane foams from blown castor oils , 1964 .
[61] D. Khakhar,et al. Castor Oil - Glycerol Blends as Polyols for Rigid Polyurethane Foams , 1993, Cellular Polymers.
[62] M. R. Pereira,et al. DSC monitoring of the cure kinetics of a castor oil-based polyurethane , 2005 .
[63] H. Yeganeh,et al. Synthesis and properties of polyurethane networks derived from new soybean oil-based polyol and a bulky blocked polyisocyanate , 2008 .
[64] Manjusri Misra,et al. Thermo‐Physical and Impact Properties of Epoxy Containing Epoxidized Linseed Oil, 1 , 2004 .
[65] N. Karak,et al. Catalytically Active Vegetable‐Oil‐Based Thermoplastic Hyperbranched Polyurethane/Silver Nanocomposites , 2010, Macromolecular Materials and Engineering.
[66] Chengshuang Wang,et al. Synthesis and thermal properties of soybean oil-based waterborne polyurethane coatings , 2010 .
[67] D. W. Schaefer,et al. Soy‐oil‐based segmented polyurethanes , 2005 .
[68] Z. Petrović,et al. Preparation and properties of castor oil‐based polyurethanes , 1984 .
[69] J. C. Cowan,et al. Polyester amides from linseed oil for protective coatings , 1966 .
[70] Yongshang Lu,et al. Novel polymeric materials from vegetable oils and vinyl monomers: preparation, properties, and applications. , 2009, ChemSusChem.
[71] Zoran S. Petrović,et al. Polyurethanes from Vegetable Oils , 2008 .
[72] G. Suppes,et al. Production of new soy-based polyols by enzyme hydrolysis of bodied soybean oil , 2007 .
[73] U. Cabulis,et al. Water-Blown Polyisocyanurate Foams From Vegetable Oil Polyols , 2008 .
[74] S. Ahmad,et al. Silica Reinforced Organic-Inorganic Hybrid Polyurethane Nanocomposites From Sustainable Resource , 2010 .
[75] K. Dušek,et al. Structure and properties of triolein-based polyurethane networks. , 2002, Biomacromolecules.
[76] Yongshang Lu,et al. New hybrid latexes from a soybean oil-based waterborne polyurethane and acrylics via emulsion polymerization. , 2007, Biomacromolecules.
[77] B. Hazer,et al. Synthesis of Segmented Polyurethane Based on Polymeric Soybean Oil Polyol and Poly (Ethylene Glycol) , 2009 .
[78] Y. Shashoua. Conservation of plastics : materials science, degradation and preservation , 2008 .
[79] E. Frankel,et al. Rigid polyurethane foams from diethanolamides of carboxylated oils and fatty acids , 1976 .
[80] B. Vijayendran,et al. Low cost and highly reactive biobased polyols: a co-product of the emerging biorefinery economy. , 2008 .
[81] Zhengdong Cheng,et al. Simultaneous Interpenetrating Polymer Networks of Polyurethane from Pentaerythritol–Modified Castor Oil and Polystyrene: Structure–Property Relationships , 2009 .
[82] Hamid Yeganeh,et al. Synthesis and properties of isocyanate curable millable polyurethane elastomers based on castor oil as a renewable resource polyol , 2004 .
[83] B. Suresh kumar,et al. Effect of zeolite particulate filler on the properties of polyurethane composites , 2009 .
[84] Wei Zhang,et al. Effect of structure on properties of polyols and polyurethanes based on different vegetable oils , 2004 .
[85] V. Mannari,et al. Hydrolysis of Epoxidized Soybean Oil in the Presence of Phosphoric Acid , 2007 .
[86] S. Narine,et al. Physical properties of canola oil based polyurethane networks. , 2007, Biomacromolecules.
[87] V. Cádiz,et al. Vegetable oil-based thermosetting polymers. , 2010 .
[88] Wei Zhang,et al. Structure–property relationships in polyurethanes derived from soybean oil , 2006 .
[89] Soo-Jin Park,et al. Effect of Biodegradable Epoxidized Castor Oil on Physicochemical and Mechanical Properties of Epoxy Resins , 2004 .
[90] J. Metzger,et al. Synthesis and characterization of polyurethanes from epoxidized methyl oleate based polyether polyols as renewable resources , 2006 .
[91] Hamid Yeganeh,et al. Preparation and properties of novel biodegradable polyurethane networks based on castor oil and poly(ethylene glycol) , 2007 .
[92] R. Larock,et al. Novel thermosets obtained by the ring‐opening metathesis polymerization of a functionalized vegetable oil and dicyclopentadiene , 2009 .
[93] Wei Zhang,et al. Vegetable oil‐based triols from hydroformylated fatty acids and polyurethane elastomers , 2010 .
[94] A. Hasnat,et al. Poly (urethane fatty amide) resin from linseed oil-A renewable resource , 2009 .
[95] J. Patel,et al. Polyurethane adhesive system from biomaterial-based polyol for bonding wood , 2003 .
[96] G. Glenn,et al. Biodegradation of Thermoplastic Polyurethanes from Vegetable Oils , 2010 .
[97] S. Narine,et al. Physical properties of sequential interpenetrating polymer networks produced from canola oil-based polyurethane and poly(methyl methacrylate). , 2008, Biomacromolecules.
[98] Wei Zhang,et al. Polyols and Polyurethanes from Hydroformylation of Soybean Oil , 2002 .
[99] H. Moeini. Preparation and properties of novel green poly(ether–ester urethane)s insulating coatings based on polyols derived from glycolyzed PET, castor oil, and adipic acid and blocked isocyanate , 2007 .
[100] H. Deka,et al. Vegetable Oil-Based Hyperbranched Thermosetting Polyurethane/Clay Nanocomposites , 2009, Nanoscale research letters.
[101] S. Narine,et al. Fatty acid-derived diisocyanate and biobased polyurethane produced from vegetable oil: synthesis, polymerization, and characterization. , 2009, Biomacromolecules.
[102] Manjusri Misra,et al. Thermo-Physical and Impact Properties of Epoxy Containing Epoxidized Linseed Oil, 2† , 2004 .
[103] E. Frankel,et al. Rigid urethane foams from hydroxymethylated linseed oil and polyol esters , 1972 .
[104] Y. Cho,et al. Structure and properties of halogenated and nonhalogenated soy‐based polyols , 2000 .
[105] L. A. Goldblatt,et al. Solvent-blown rigid urethane foams from castor-based polyols , 1961 .
[106] Chengshuang Wang,et al. Polyurethane networks from different soy‐based polyols by the ring opening of epoxidized soybean oil with methanol, glycol, and 1,2‐propanediol , 2009 .
[107] G. Suppes,et al. Soy‐based polyols from oxirane ring opening by alcoholysis reaction , 2009 .
[108] S. Ajithkumar,et al. Kinetics of castor oil based polyol–toluene diisocyanate reactions , 1998 .
[109] W. Friedt,et al. New Syntheses with Oils and Fats as Renewable Raw Materials for the Chemical Industry. , 2000, Angewandte Chemie.
[110] G. Wilkes,et al. Characterization of flexible polyurethane foams based on soybean‐based polyols , 2009 .
[111] M. Valero. Polyurethane–Polystyrene Simultaneous Interpenetrating Networks from Modified Castor Oil , 2010 .
[112] Yongshang Lu,et al. Innovative plasticized starch films modified with waterborne polyurethane from renewable resources , 2005 .
[113] Wei Zhang,et al. Effect of different isocyanates on the properties of soy‐based polyurethanes , 2003 .
[114] Michael Szycher,et al. Szycher's Handbook of Polyurethanes , 2012 .
[115] Wei Zhang,et al. Structure and properties of polyurethanes based on halogenated and nonhalogenated soy–polyols , 2000 .
[116] Damien Erre,et al. Preparation and properties of starch thermoplastics modified with waterborne polyurethane from renewable resources , 2005 .
[117] I. Rácz,et al. Microfoams based on castor oil polyurethanes and vegetable fibers , 2007 .
[118] D. Randall,et al. The polyurethanes book , 2002 .
[119] I. Javni,et al. Soy‐based polyurethanes by nonisocyanate route , 2008 .
[120] A. Gandini,et al. Materials from Vegetable Oils: Major Sources, Properties and Applications , 2008 .
[121] H. Deka,et al. Bio-based hyperbranched polyurethanes for surface coating applications , 2009 .