Selective oxidation technologies using various thicknesses of silicon nitride formed by low-pressure chemical vapor deposition (LPCVD), plasma assisted nitridation in ammonia, and by nitrogen ion implantation were investigated. The transition region ("bird's beak") profiles were found to be related to the rigidity of the nitride film and also the oxidation underneath the nitride film via the buffer oxide or even a native oxide. With complete elimination of any oxide between Si3N4and Si achieved by implanting with nitrogen ions or nitriding in an ammonia plasma, a very abrupt transition region was achieved. This new sealed interface localized oxidation (SILO) technology appears to have low crystal defect density suitable for VLSI MOS technology.
[1]
E. Irene.
Residual stress in silicon nitride films
,
1976
.
[2]
Takashi Ito,et al.
Retardation of Destructive Breakdown of SiO2 Films Annealed in Ammonia Gas
,
1980
.
[3]
Takashi Ito,et al.
Direct Thermal Nitridation of Silicon Dioxide Films in Anhydrous Ammonia Gas
,
1980
.
[4]
Takashi Ito,et al.
Thermally grown silicon nitride films for high-performance MNS devices
,
1978
.
[5]
TOPOLOGY OF SILICON STRUCTURES WITH RECESSED SILICON DIOXIDE
,
1977
.
[6]
T. Nakamura,et al.
Plasma-enhanced thermal nitridation of silicon
,
1981
.
[7]
A New Preferential Etch for Defects in Silicon Crystals
,
1977
.
[8]
LOW ENERGY NITROGEN IMPLANTATION INTO SILICON: ITS MATERIAL COMPOSITION, OXIDATION RESISTANCE, AND ELECTRICAL CHARACTERISTICS
,
1982
.