Thermal field characteristic analysis of steel box girder based on long-term measurement data

Thermal loads are important factors that affect the serviceability of long-span bridges. In this paper, the distribution characteristics and statistical features of thermal field in flat steel box girder are presented based on long-term field measurement data collected by the structural health monitoring system (SHMS) permanently installed on the Runyang Suspension Bridge (RSB). Firstly, the daily variations as well as seasonal ones of measurement temperature and temperature differences in the box girder cross-section are summarized. Secondly, employing a combined probability distribution model defined by the weighted sum of one Weibull distribution and one normal distribution, the probability density function (PDF) of each temperature difference is formulated. Thirdly, making use of the extreme value analysis, the extreme temperature differences are predicted with a return period of bridge design working life and compared with the expected values in British standard (BS EN 1991-1-5, 2003). Finally, the critical temperature difference models in cross-section are proposed for thermal stresses calculation according to correlation analysis. The results provide a clear understanding of thermal field in flat steel box girder bridges and have reference values for structural design and evaluation.

[1]  L. Tham,et al.  Numerical modelling for temperature distribution in steel bridges , 2001 .

[2]  Bo Chen,et al.  Monitoring temperature effect on a long suspension bridge , 2009 .

[3]  Jyrki Kullaa,et al.  Eliminating Environmental or Operational Influences in Structural Health Monitoring using the Missing Data Analysis , 2009 .

[4]  I C Potgieter,et al.  RESPONSE OF HIGHWAY BRIDGES TO NONLINEAR TEMPERATURE DISTRIBUTIONS. CIVIL ENGINEERING STUDIES. FINAL REPORT , 1983 .

[5]  M Emerson,et al.  THE CALCULATION OF THE DISTRIBUTION OF TEMPERATURE IN BRIDGES , 1973 .

[6]  Enrique Castillo.  Extreme value theory in engineering , 1988 .

[7]  Allan Churchward,et al.  Prediction of temperatures in concrete bridges , 1981 .

[8]  Mjn Priestley,et al.  Design thermal gradients for concrete bridges , 1976 .

[9]  Mo Shing Cheung,et al.  THERMAL BEHAVIOR OF COMPOSITE BRIDGES , 1990 .

[10]  H. Hao,et al.  Long term vibration monitoring of an RC slab: Temperature and humidity effect , 2006 .

[11]  W. Zuk.  THERMAL BEHAVIOR OF COMPOSITE BRIDGES - INSULATED AND UNINSULATED , 1965 .

[12]  Ali S. Hadi,et al.  Extreme Value and Related Models with Applications in Engineering and Science , 2004 .

[13]  B. Hunt,et al.  Thermal Calculations for Bridge Design , 1975 .

[14]  M W Capps,et al.  The thermal behaviour of the Beachley Viaduct/Wye Bridge , 1968 .

[15]  M. Arockiasamy,et al.  Analytical and Measured Strains in Sunshine Skyway Bridge. II , 1996 .

[16]  John T. DeWolf,et al.  Effect of Differential Temperature on a Curved Post-Tensioned Concrete Bridge , 2004 .

[17]  Fernando A. Branco,et al.  THERMAL ACTIONS FOR CONCRETE BRIDGE DESIGN , 1993 .

[18]  C. L. Roberts-Wollman,et al.  Measurements of Thermal Gradients and their Effects on Segmental Concrete Bridge , 2002 .

[19]  AiQun Li,et al.  Temperature-induced variations of measured modal frequencies of steel box girder for a long-span suspension bridge , 2011 .

[20]  K. Folliard,et al.  Temperature Boundary Condition Models for Concrete Bridge Members , 2007 .

[21]  Jyrki Kullaa,et al.  Distinguishing between sensor fault, structural damage, and environmental or operational effects in structural health monitoring , 2011 .

[22]  Duen Ho,et al.  Extreme Thermal Loadings in Highway Bridges , 1989 .

[23]  Enrique Mirambell,et al.  Temperature and Stress Distributions in Concrete Box Girder Bridges , 1990 .

[24]  M. Priestley.  Design of Concrete Bridges for Temperature Gradients , 1978 .

[25]  Jack H. Emanuel,et al.  Thermal stresses and movements in bridges , 1974 .

[26]  Youliang Ding,et al.  Fatigue reliability assessment for bridge welded details using long-term monitoring data , 2011 .

[27]  Sung Pil Chang,et al.  Design Thermal Loads In Composite Box Girder Bridges , 1998 .

[28]  Dongning Li,et al.  Thermal design criteria for deep prestressed concrete girders based on data from Confederation Bridge , 2004 .

[29]  Sung-Pil Chang,et al.  Estimating Extreme Thermal Loads in Composite Bridge using Long-term Measured Data , 2004 .

[30]  J. Kennedy,et al.  TEMPERATURE DISTRIBUTION IN COMPOSITE BRIDGES , 1987 .