Advanced process characterization using light source performance modulation and monitoring

As DUV multi-patterning requirements continue to become more stringent, it is critical that all sources of lithography patterning variability are characterized and monitored. Advanced process characterization studies have been enabled using Cymer’s novel technique to modulate Beam Divergence and Polarization, and Energy, Bandwidth, or Wavelength light source performance. These techniques have been instrumental in helping identify process sensitivities that enable proactive light source monitoring and excursion detection using SmartPulseTM. Demonstration of the benefits of these technologies is provided through results from recent experiments at imec. Changes in patterning performance are characterized using top down CD-SEM metrology, enabling excellent correlation between optical parameters and on wafer attributes for typical patterning geometries. In addition, new results show that changes in laser beam parameter performance can have measurable wafer patterning and/or illumination impacts. Chipmakers can benefit from the use of this capability to perform proactive, comprehensive characterization of current and next generation process nodes.

[1]  Shinji Wakamoto,et al.  Immersion lithography extension to sub-10nm nodes with multiple patterning , 2014, Advanced Lithography.

[2]  Hung-Yi Wu,et al.  Effects of laser bandwidth on tool to tool CD matching , 2008, SPIE Advanced Lithography.

[3]  Jan Baselmans,et al.  Optimum ArFi laser bandwidth for 10nm node logic imaging performance , 2015, Advanced Lithography.

[4]  Kazuyuki Yoshimochi,et al.  Study of iso-dense bias (IDB) sensitivity to laser spectral shape at the 45nm node , 2007, SPIE Advanced Lithography.

[5]  Will Conley,et al.  Improvements in bandwidth and wavelength control for XLR 660xi systems , 2014, Advanced Lithography.

[6]  Lieve Van Look,et al.  Lithography imaging control by enhanced monitoring of light source performance , 2013, Advanced Lithography.

[7]  J. Finders,et al.  Imaging challenges in 20nm and 14nm logic nodes: hot spots performance in Metal1 layer , 2013, Other Conferences.

[8]  Michiel Kupers,et al.  Laser bandwidth effect on overlay budget and imaging for the 45 nm and 32nm technology nodes with immersion lithography , 2010, Advanced Lithography.

[9]  Ivan Lalovic,et al.  Effects of 95% integral vs. FWHM bandwidth specifications on lithographic imaging , 2001, SPIE Advanced Lithography.

[10]  Toshihiro Oga,et al.  Challenging to meet 1nm iso-dense bias (IDB) by controlling laser spectrum , 2007, SPIE Advanced Lithography.

[11]  Wayne J. Dunstan,et al.  Active spectral control of DUV light sources for OPE minimization , 2006, SPIE Advanced Lithography.

[12]  Christopher P. Ausschnitt,et al.  Laser bandwidth and other sources of focus blur in lithography , 2006 .

[13]  Kevin O'Brien,et al.  High-range laser light bandwidth measurement and tuning , 2011, Advanced Lithography.

[14]  Joost Bekaert,et al.  Improving on-wafer CD correlation analysis using advanced diagnostics and across-wafer light-source monitoring , 2014, Advanced Lithography.

[15]  Takayuki Funatsu,et al.  Immersion scanners enabling 10nm half-pitch production and beyond , 2014, Advanced Lithography.

[16]  Jan Mulkens,et al.  Holistic optimization architecture enabling sub-14-nm projection lithography , 2014 .

[17]  Sang-Ho Lee,et al.  Analysis of the effect of laser bandwidth on imaging of memory patterns , 2008, Lithography Asia.

[18]  John Lin,et al.  Effects of laser bandwidth on iso-dense bias and line end shortening at sub-micron process nodes , 2007, SPIE Advanced Lithography.

[19]  P. Bisschop,et al.  Impact of finite laser bandwidth on the critical dimension of L/S structures , 2008 .

[20]  Hajime Aoyama,et al.  Impact of realistic source shape and flexibility on source mask optimization , 2013 .

[21]  Stephen P. Renwick,et al.  Effects of laser bandwidth on OPE in a modern lithography tool , 2006, SPIE Advanced Lithography.

[22]  Nakgeuon Seong,et al.  Enhancing lithography process control through advanced, on-board beam parameter metrology for wafer level monitoring of light source parameters , 2012, Advanced Lithography.