Experimental Study on Delamination Migration in Composite Laminates

[1]  Tong Earn Tay,et al.  Modeling delamination migration in cross-ply tape laminates , 2015 .

[2]  Vincent B. C. Tan,et al.  Recent efforts toward modeling interactions of matrix cracks and delaminations: an integrated XFEM-CE approach , 2014 .

[3]  Tong Earn Tay,et al.  A floating node method for the modelling of discontinuities in composites , 2014 .

[4]  J. Ratcliffe,et al.  Investigating Delamination Migration in Composite Tape Laminates , 2014 .

[5]  Emile S. Greenhalgh,et al.  Delamination growth directionality and the subsequent migration processes – The key to damage tolerant design , 2013 .

[6]  Michael W. Czabaj,et al.  A Test for Characterizing Delamination Migration in Carbon/Epoxy Tape Laminates , 2012 .

[7]  S. Pinho,et al.  Delamination growth mechanism from embedded defects in compression , 2011 .

[8]  Emile S. Greenhalgh,et al.  Fractographic observations on delamination growth and the subsequent migration through the laminate , 2009 .

[9]  Emile S. Greenhalgh,et al.  Failure Analysis and Fractography of Polymer Composites , 2009 .

[10]  L. J. Sluys,et al.  A phantom node formulation with mixed mode cohesive law for splitting in laminates , 2009 .

[11]  Daosheng Ling,et al.  An augmented finite element method for modeling arbitrary discontinuities in composite materials , 2009 .

[12]  Michael R Wisnom,et al.  An experimental and numerical investigation into the damage mechanisms in notched composites , 2009 .

[13]  T. Belytschko,et al.  A review of extended/generalized finite element methods for material modeling , 2009 .

[14]  Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites 1 , 2009 .

[15]  Pedro P. Camanho,et al.  An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models , 2007 .

[16]  George Z. Voyiadjis,et al.  Mechanics of Composite Materials with MATLAB , 2005 .

[17]  J. Andersons,et al.  Dependence of fracture toughness of composite laminates on interface ply orientations and delamination growth direction , 2004 .

[18]  R. Krueger,et al.  Analysis of Flexure Tests for Transverse Tensile Strength Characterization of Unidirectional Composites , 2003 .

[19]  Pierre J. A. Minguet,et al.  Testing and Analysis of Composite Skin/Stringer Debonding Under Multi-Axial Loading , 1999 .

[20]  S. Singh,et al.  INVESTIGATION OF THE FAILURE MECHANISMS FOR DELAMINATION GROWTH FROM EMBEDDED DEFECTS , 1999 .

[21]  C. Sun,et al.  Influence of Ply Orientation on Delamination in Composite Laminates , 1996, Aerospace.

[22]  Tk O'Brien,et al.  Composite Interlaminar Shear Fracture Toughness, G IIc : Shear Measurement or Sheer Myth? , 1998 .

[23]  Barry D. Davidson,et al.  Effect of stacking sequence on energy release rate distributions in multidirectional DCB and ENF specimens , 1996 .

[24]  C. Sun,et al.  Delamination characteristics of double-cantilever beam and end-notched flexure composite specimens , 1996 .

[25]  D. Hull,et al.  Damage mechanism characterization in composite damage tolerance investigations , 1993 .

[26]  P. Robinson,et al.  A Modified DCB Specimen for Mode I Testing of Multidirectional Laminates , 1992 .

[27]  J. Hutchinson,et al.  Kinking of A Crack Out of AN Interface , 1989 .

[28]  John W. Hutchinson,et al.  Crack deflection at an interface between dissimilar elastic-materials , 1989 .

[29]  D. Purslow.  Matrix fractography of fibre-reinforced epoxy composites , 1986 .

[30]  M. Kanninen,et al.  A finite element calculation of stress intensity factors by a modified crack closure integral , 1977 .

[31]  T. S. Cook,et al.  Stresses in bonded materials with a crack perpendicular to the interface , 1972 .