A new topology for nonisolated multiport zero voltage switching dc‐dc converter

Int J Circ Theor Appl. 2018;1–24. Summary In this paper, a newmultiport zero voltage switching dc‐dc converter is proposed. Multiport dc‐dc converters are widely applicable in hybrid energy generating systems to provide substantial power to sensitive loads. The proposed topology can operate in 3 operational modes of boost, buck, and buck‐boost. Moreover, it has zero voltage switching operation for all switches and has the ability to eliminate the input current ripple; also, at low voltage side, the input sources can be extended. In addition, it has the ability of interfacing 3 different voltages only by using 3 switches. In this paper, the proposed topology is analyzed theoretically for all operatingmodes; besides, the voltage and current equations of all components are calculated. Furthermore, the required soft switching and zero input currents ripple conditions are analyzed. Finally, to demonstrate the accurate performance of the proposed converter, the Power System Computer Aided Design(PSCAD)/ Electro Magnetic Transient Design and Control(EMTDC) simulation and experimental results are extracted and presented.

[1]  Taehyung Kim,et al.  Single pole switch leg based multi-port converter with an energy storage , 2016 .

[2]  Carlo Cecati,et al.  High step-up high step-down bidirectional DC/DC converter , 2017 .

[3]  X. Ruan,et al.  Isolated Buck–Boost DC/DC Converters Suitable for Wide Input-Voltage Range , 2011, IEEE Transactions on Power Electronics.

[4]  Ali Ajami,et al.  Soft switching method for multiport DC/DC converters applicable in grid connected clean energy sources , 2015 .

[5]  Junjun Zhang,et al.  A Family of Multiport Buck–Boost Converters Based on DC-Link-Inductors (DLIs) , 2015, IEEE Transactions on Power Electronics.

[6]  Dmitri Vinnikov,et al.  Quasi-Z-Source-Based Isolated DC/DC Converters for Distributed Power Generation , 2011, IEEE Transactions on Industrial Electronics.

[7]  Ebrahim Babaei,et al.  A new interleaved bidirectional dc/dc converter with zero voltage switching and high voltage gain: analyses, design and simulation , 2017, Int. J. Circuit Theory Appl..

[8]  R. Outbib,et al.  Performances evaluation of an electrical and a magnetic coupling multi-port converters , 2014, 2014 First International Conference on Green Energy ICGE 2014.

[9]  M. Marchesoni,et al.  New DC–DC Converter for Energy Storage System Interfacing in Fuel Cell Hybrid Electric Vehicles , 2007, IEEE Transactions on Power Electronics.

[10]  Gerry Moschopoulos,et al.  Analysis and design of a ZVS-PWM full-bridge converter with reduced conduction losses , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[11]  Ebrahim Babaei,et al.  A New Topology of Bidirectional Buck-Boost dc/dc Converter with Capability of Soft Switching and input Current Ripple Cancellation , 2016 .

[12]  Yun Xu,et al.  An Analytical Steady-State Model of LCC type Series–Parallel Resonant Converter With Capacitive Output Filter , 2014, IEEE Transactions on Power Electronics.

[13]  Yu-Kang Lo,et al.  Analysis and design of a two‐transformer active‐clamping ZVS isolated inverse‐SEPIC converter , 2014, Int. J. Circuit Theory Appl..

[14]  Mehrdad Tarafdar Hagh,et al.  A Nonisolated Multiinput Multioutput DC–DC Boost Converter for Electric Vehicle Applications , 2015, IEEE Transactions on Power Electronics.

[15]  Kaushik Rajashekara,et al.  Novel Modular Multiple-Input Bidirectional DC–DC Power Converter (MIPC) for HEV/FCV Application , 2015, IEEE Transactions on Industrial Electronics.

[16]  Chun-An Cheng,et al.  Analysis and implementation of a high step-up converter for fuel cell power-generation systems , 2016, Int. J. Circuit Theory Appl..

[17]  Jianmin Wang,et al.  An active‐clamping zero‐voltage‐switching flyback converter with integrated transformer , 2015, Int. J. Circuit Theory Appl..

[18]  Ebrahim Babaei,et al.  Structure for multi-input multi-output dc–dc boost converter , 2016 .

[19]  Yi Zhao,et al.  PWM Plus Phase Angle Shift (PPAS) Control Scheme for Combined Multiport DC/DC Converters , 2012, IEEE Transactions on Power Electronics.

[20]  Ebrahim Babaei,et al.  A New Interleaved Bidirectional Zero Voltage Switching DC/DC Converter with High Conversion Ratio , 2017, J. Circuits Syst. Comput..

[21]  Hyun-Lark Do.  Nonisolated Bidirectional Zero-Voltage-Switching DC–DC Converter , 2011, IEEE Transactions on Power Electronics.

[22]  Fan Yi,et al.  Modeling, Control, and Seamless Transition of the Bidirectional Battery-Driven Switched Reluctance Motor/Generator Drive Based on Integrated Multiport Power Converter for Electric Vehicle Applications , 2016, IEEE Transactions on Power Electronics.

[23]  Yie-Tone Chen,et al.  An interleaved high step-up DC-DC converter with double boost paths , 2015, Int. J. Circuit Theory Appl..

[24]  Bin Gu,et al.  Hybrid-Switching Full-Bridge DC–DC Converter With Minimal Voltage Stress of Bridge Rectifier, Reduced Circulating Losses, and Filter Requirement for Electric Vehicle Battery Chargers , 2013, IEEE Transactions on Power Electronics.

[25]  Wei Jiang,et al.  Multi-port Power Electric Interface for Renewable Energy Sources , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[26]  Ebrahim Babaei,et al.  High voltage gain dc–dc converters based on coupled inductors , 2018 .

[27]  Gerry Moschopoulos,et al.  A ZVS-PWM full-bridge converter with reduced conduction losses , 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[28]  Yaow-Ming Chen,et al.  A Systematic Approach to Synthesizing Multi-Input DC/DC Converters , 2007, 2007 IEEE Power Electronics Specialists Conference.

[29]  Bor-Ren Lin,et al.  Implementation of an interleaved pulse-width modulation converter for renewable energy conversion , 2013, Int. J. Circuit Theory Appl..