Micro inverter with a front-end current-fed converter

The reliability of micro inverters is an important factor as it would be necessary to reduce cost and maintenance of the small and medium scale distributed PV power conversion systems. Electrolytic capacitors and active power decouple circuits can be avoided in micro inverters with the use of a medium voltage DC-link. Such a DC-link based micro inverter is proposed with a front-end dual inductor current-fed push-pull converter. The primary side power switches of the front-end converter have reduced switching losses due to multi-resonant operation. In addition, the voltage and current stresses on the diodes of the secondary diode voltage doubler rectifier are reduced due to the presence of a series resonant circuit in the front-end converter. The operation of the proposed micro inverter is explained using an in-depth analysis of the switching characteristics of the power semiconductor devices. The theoretical analysis of the proposed micro inverter is validated using simulation results.

[1]  F. Lee,et al.  Evaluation and Application of 600 V GaN HEMT in Cascode Structure , 2014, IEEE Transactions on Power Electronics.

[2]  Sebastian Strache,et al.  A Comprehensive, Quantitative Comparison of Inverter Architectures for Various PV Systems, PV Cells, and Irradiance Profiles , 2014, IEEE Transactions on Sustainable Energy.

[3]  Enrique Romero-Cadaval,et al.  Grid-Connected Photovoltaic Generation Plants: Components and Operation , 2013, IEEE Industrial Electronics Magazine.

[4]  Michael Dale,et al.  Energy balance of the global photovoltaic (PV) industry--is the PV industry a net electricity producer? , 2013, Environmental science & technology.

[5]  Eugene H. Kim,et al.  High step-up resonant push-pull converter with high efficiency , 2009 .

[6]  Akshay Kumar Rathore,et al.  Naturally Clamped Zero-Current Commutated Soft-Switching Current-Fed Push–Pull DC/DC Converter: Analysis, Design, and Experimental Results , 2015, IEEE Transactions on Power Electronics.

[7]  Remus Teodorescu,et al.  A New Single-Phase PLL Structure Based on Second Order Generalized Integrator , 2006 .

[8]  Gerd Griepentrog,et al.  Towards next generation photovoltaic inverters , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[9]  S. Harb,et al.  Reliability of Candidate Photovoltaic Module-Integrated-Inverter (PV-MII) Topologies—A Usage Model Approach , 2013, IEEE Transactions on Power Electronics.

[10]  Y. Lembeye,et al.  Novel Half-Bridge Inductive DC–DC Isolated Converters for Fuel Cell Applications , 2009, IEEE Transactions on Energy Conversion.

[11]  D. M. Vilathgamuwa,et al.  HFL PV micro-inverter with front-end current-fed converter and half-wave cycloconverter , 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).

[12]  Yong-Chae Jung,et al.  Soft-Switching Current-Fed Push–Pull Converter for 250-W AC Module Applications , 2014, IEEE Transactions on Power Electronics.

[13]  Bill Marion,et al.  Performance and Economic Analysis of Distributed Power Electronics in Photovoltaic Systems , 2011 .

[14]  Gehan A. J. Amaratunga,et al.  Long-Lifetime Power Inverter for Photovoltaic AC Modules , 2008, IEEE Transactions on Industrial Electronics.

[15]  I. Barbi,et al.  A comparison between two current-fed push-pull DC-DC converters-analysis, design and experimentation , 1996, Proceedings of Intelec'96 - International Telecommunications Energy Conference.

[16]  Quan Li,et al.  An Analysis of the ZVS Two-Inductor Boost Converter under Variable Frequency Operation , 2007, IEEE Transactions on Power Electronics.

[17]  D. M. Vilathgamuwa,et al.  Optimized switching control strategy for current-fed half-bridge converter , 2014, 2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014.

[18]  Fred C. Lee,et al.  Evaluation and application of 600V GaN HEMT in cascode structure , 2013, 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[19]  Emilio Figueres,et al.  Reconfigurable Control Scheme for a PV Microinverter Working in Both Grid-Connected and Island Modes , 2013, IEEE Transactions on Industrial Electronics.

[20]  D. M. Vilathgamuwa,et al.  High-frequency-link micro-inverter with front-end current-fed half-bridge boost converter and half-wave cycloconverter , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

[21]  A. K. Rathore,et al.  Analysis, Design, and Experimental Results of a Novel Soft-Switching Snubberless Current-Fed Half-Bridge Front-End Converter-Based PV Inverter , 2013, IEEE Transactions on Power Electronics.

[22]  J. Doval-Gandoy,et al.  Grid-synchronization methods for power converters , 2009, 2009 35th Annual Conference of IEEE Industrial Electronics.

[23]  Haibing Hu,et al.  A Review of Power Decoupling Techniques for Microinverters With Three Different Decoupling Capacitor Locations in PV Systems , 2013, IEEE Transactions on Power Electronics.

[24]  Quan Li,et al.  A Review of the Single Phase Photovoltaic Module Integrated Converter Topologies With Three Different DC Link Configurations , 2008, IEEE Transactions on Power Electronics.

[25]  Peter J. Wolfs.  A current-sourced DC-DC converter derived via the duality principle from the half-bridge converter , 1993, IEEE Trans. Ind. Electron..

[26]  Arthur F. Witulski,et al.  A unified treatment of a family of ZVS and ZCS resonant inverters , 1997, PESC97. Record 28th Annual IEEE Power Electronics Specialists Conference. Formerly Power Conditioning Specialists Conference 1970-71. Power Processing and Electronic Specialists Conference 1972.

[27]  Akshay Kumar Rathore,et al.  Analysis, Design and Experimental Results of Wide Range ZVS Active-Clamped L-L Type Current-Fed DC/DC Converter for Fuel Cells to Utility Interface , 2012, IEEE Transactions on Industrial Electronics.