Selective laser sintering (SLS) is a process that uses a rastering laser to sinter powder particles into a computer defined shape. In order to fabricate micro part with laser sintering the laser beam spot should be focused smaller, on the other hand the size of sintered powder particles should be smaller too. Therefore Nd:YAG laser doubling frequency is used to obtain mini-focus. Based on theories of nonlinear and resonant cavity, an equipment which perform frequency doubling on YAG laser(1.06μm) by the external resonant ring cavity has been designed. With the equipment the wave length of 0.532μm green light was output. The focused laser spot of 15μm diameter was obtained with 10W power. Meanwhile the micron metal powder was used in selective laser micro sintering (SLMS). The behavior of laser sintering different metal powder was investigated. Finally the micro Chinese characters which is small as a tip of match made with laser selective micro sintering micron metal powder are shown.
[1]
S. Baskaran,et al.
Issues in fabricating manufacturing tooling using powder-based additive freeform fabrication
,
1996
.
[2]
Duc Truong Pham,et al.
Selective laser sintering: Applications and technological capabilities
,
1999
.
[3]
K. Osakada,et al.
The manufacturing of hard tools from metallic powders by selective laser melting
,
2001
.
[4]
K. Osakada,et al.
Finite element analysis of melting and solidifying processes in laser rapid prototyping of metallic powders
,
1999
.
[5]
D. King,et al.
Alternative materials for rapid tooling
,
2002
.