Temporal and Spatial Detection of the Onset of Local Necking and Assessment of its Growth Behavior

This study proposes a method for the temporal and spatial determination of the onset of local necking determined by means of a Nakajima test set-up for a DC04 deep drawing and a DP800 dual-phase steel, as well as an AA6014 aluminum alloy. Furthermore, the focus lies on the observation of the progress of the necking area and its transformation throughout the remainder of the forming process. The strain behavior is learned by a machine learning approach on the basis of the images when the process is close to material failure. These learned failure characteristics are transferred to new forming sequences, so that critical areas indicating material failure can be identified at an early stage, and consequently enable the determination of the beginning of necking and the analysis of the necking area. This improves understanding of the necking behavior and facilitates the determination of the evaluation area for strain paths. The growth behavior and traceability of the necking area is objectified by the proposed weakly supervised machine learning approach, thereby rendering a heuristic-based determination unnecessary. Furthermore, a simultaneous evaluation on image and pixel scale is provided that enables a distinct selection of the failure quantile of the probabilistic forming limit curve.

[1]  Li Fei-Fei,et al.  ImageNet: A large-scale hierarchical image database , 2009, CVPR.

[2]  Paulo A.F. Martins,et al.  Recent Approaches for the Determination of Forming Limits by Necking and Fracture in Sheet Metal Forming , 2015 .

[3]  Andreas Maier,et al.  Analysis of Forming Limits in Sheet Metal Forming with Pattern Recognition Methods. Part 2: Unsupervised Methodology and Application , 2018, Materials.

[4]  Yann LeCun,et al.  Dimensionality Reduction by Learning an Invariant Mapping , 2006, 2006 IEEE Computer Society Conference on Computer Vision and Pattern Recognition (CVPR'06).

[5]  Christian Riess,et al.  Automatic Classification of Defective Photovoltaic Module Cells in Electroluminescence Images , 2018, Solar Energy.

[6]  Christian Riess,et al.  A Gentle Introduction to Deep Learning in Medical Image Processing , 2018, Zeitschrift fur medizinische Physik.

[7]  L. R. Dice Measures of the Amount of Ecologic Association Between Species , 1945 .

[8]  Andreas Maier,et al.  Analysis of Forming Limits in Sheet Metal Forming with Pattern Recognition Methods. Part 1: Characterization of Onset of Necking and Expert Evaluation , 2018, Materials.

[9]  Marion Merklein,et al.  A New Approach to the Evaluation of Forming Limits in Sheet Metal Forming , 2015 .

[10]  Marion Merklein,et al.  Metallographic analysis of failure mechanisms during Nakajima tests for the evaluation of forming limits on a dual-phase steel , 2018, IOP Conference Series: Materials Science and Engineering.

[11]  Andreas K. Maier,et al.  Deep Learning Computed Tomography , 2016, MICCAI.

[12]  Pavel Hora,et al.  New algorithm for a robust user-independent evaluation of beginning instability for the experimental FLC determination , 2011 .

[13]  Bill Triggs,et al.  Histograms of oriented gradients for human detection , 2005, 2005 IEEE Computer Society Conference on Computer Vision and Pattern Recognition (CVPR'05).

[14]  R. Arrieux,et al.  Determination of the Forming Limit Diagrams Using Image Analysis by the Corelation Method , 1999 .

[15]  Marion Merklein,et al.  Determination of Forming Limits in Sheet Metal Forming Using Deep Learning , 2019, Materials.

[16]  Michael S. Bernstein,et al.  ImageNet Large Scale Visual Recognition Challenge , 2014, International Journal of Computer Vision.

[17]  Geoffrey J. McLachlan,et al.  Robust mixture modelling using the t distribution , 2000, Stat. Comput..

[18]  Yuan Yu,et al.  TensorFlow: A system for large-scale machine learning , 2016, OSDI.

[19]  Andrew Zisserman,et al.  Very Deep Convolutional Networks for Large-Scale Image Recognition , 2014, ICLR.

[20]  Jun Wang,et al.  Unexpected Event Prediction in Wire Electrical Discharge Machining Using Deep Learning Techniques , 2018, Materials.

[21]  Heinrich Niemann,et al.  Klassifikation von Mustern , 1983 .

[22]  Affronti Emanuela,et al.  Metallographic Analysis of Nakajima Tests for the Evaluation of the Failure Developments , 2017 .

[23]  Yann LeCun,et al.  Learning a similarity metric discriminatively, with application to face verification , 2005, 2005 IEEE Computer Society Conference on Computer Vision and Pattern Recognition (CVPR'05).

[24]  Baiyan He,et al.  Measuring forming limit strains with digital image correlation analysis , 2014 .

[25]  Bernhard Schölkopf,et al.  Support Vector Method for Novelty Detection , 1999, NIPS.

[26]  Hervé Delingette,et al.  Robust Non-rigid Registration Through Agent-Based Action Learning , 2017, MICCAI.

[27]  Abhishek Das,et al.  Grad-CAM: Visual Explanations from Deep Networks via Gradient-Based Localization , 2016, 2017 IEEE International Conference on Computer Vision (ICCV).

[28]  Odd Sture Hopperstad,et al.  Experimental detection of forming limit strains on samples with multiple local necks , 2016 .

[29]  Andreas K. Maier,et al.  Sheet metal forming limits as classification problem , 2017, 2017 Fifteenth IAPR International Conference on Machine Vision Applications (MVA).

[30]  Thomas Brox,et al.  U-Net: Convolutional Networks for Biomedical Image Segmentation , 2015, MICCAI.

[31]  Nassir Navab,et al.  X-ray-transform Invariant Anatomical Landmark Detection for Pelvic Trauma Surgery , 2018, MICCAI.