Economic Optimal HVAC Design for Hybrid GEOTABS Buildings and CO2 Emissions Analysis

In the early design phase of a building, the task of the Heating, Ventilation and Air Conditioning (HVAC) engineer is to propose an appropriate HVAC system for a given building. This system should provide thermal comfort to the building occupants at all time, meet the building owner’s specific requirements, and have minimal investment, running, maintenance and replacement costs (i.e., the total cost) and energy use or environmental impact. Calculating these different aspects is highly time-consuming and the HVAC engineer will therefore only be able to compare a (very) limited number of alternatives leading to suboptimal designs. This study presents therefore a Python tool that automates the generation of all possible scenarios for given thermal power profiles and energy load and a given database of HVAC components. The tool sizes each scenario properly, computes its present total cost (PC) and the total CO 2 emissions associated with the building energy use. Finally, the different scenarios can be searched and classified to pick the most appropriate scenario. The tool uses static calculations based on standards, manufacturer data and basic assumptions similar to those made by engineers in the early design phase. The current version of the tool is further focused on hybrid GEOTABS building, which combines a GEOthermal heat pump with a Thermally Activated System (TABS). It should further be noted that the tool optimizes the HVAC system but not the building envelope, while, ideally, both should be simultaneously optimized.

[1]  Edward Henry Mathews,et al.  Needs and trends in building and HVAC system design tools , 2002 .

[2]  Lieve Helsen,et al.  Thermally activated building systems in office buildings: impact of controller settings on energy performance and thermal comfort , 2010 .

[3]  Manfred Morari,et al.  Use of model predictive control and weather forecasts for energy efficient building climate control , 2012 .

[4]  Ralph Evins,et al.  Multi-level optimization of building design, energy system sizing and operation , 2015 .

[5]  Lukas Ferkl,et al.  Model predictive control of a building heating system: The first experience , 2011 .

[6]  Lieve Helsen,et al.  Slow thermally activated building system and fast air handling unit join forces through the use of model based predictive control , 2013 .

[7]  Damien Picard,et al.  Modeling, Optimal Control and HVAC Design of Large Buildings using Ground Source Heat Pump Systems , 2017 .

[8]  Iakovos Michailidis,et al.  Model-based and model-free “plug-and-play” building energy efficient control , 2015 .

[9]  Luis Pérez-Lombard,et al.  A review on buildings energy consumption information , 2008 .

[10]  Stefan Plesser,et al.  Advanced system design and operation of GEOTABS buildings : design and operation of GEOTABS systems , 2013 .

[11]  Bjarne W. Olesen,et al.  Radiant heating and cooling by embedded water-based systems. , 2004 .

[12]  Lieve Helsen,et al.  Combined design and control optimization of residential heating systems in a smart-grid context , 2016 .

[13]  Lukas Ferkl,et al.  Model-based energy efficient control applied to an office building , 2014 .

[14]  Lino Guzzella,et al.  Optimal design and operation of building services using mixed-integer linear programming techniques , 2013 .

[15]  Ryozo Ooka,et al.  Optimization of the HVAC system design to minimize primary energy demand , 2014 .

[16]  Ryozo Ooka,et al.  Optimal design method for building energy systems using genetic algorithms , 2009 .

[17]  Zhen Tian,et al.  Energy performance optimization of radiant slab cooling using building simulation and field measurements , 2009 .

[18]  Gregor P. Henze,et al.  Primary energy and comfort performance of ventilation assisted thermo-active building systems in continental climates , 2008 .

[19]  Güntensperger Werner,et al.  CONTROL OF CONCRETE CORE CONDITIONING SYSTEMS , 2005 .

[20]  Iakovos Michailidis,et al.  Proactive control for solar energy exploitation: A german high-inertia building case study , 2015 .

[21]  Martine Baelmans,et al.  Efficiently produced heat and cold is squandered by inappropriate control strategies: A case study , 2009 .

[22]  Maarten Sourbron.  Dynamic Thermal Behaviour of Buildings with Concrete Core Activation (Dynamisch thermisch gedrag van gebouwen met betonkernactivering) , 2012 .

[23]  Philippe Rigo,et al.  A review on simulation-based optimization methods applied to building performance analysis , 2014 .

[24]  Manfred Morari,et al.  Model Predictive Control of a Swiss Office Building , 2013 .