Interference-Free Inspection Path Generation for Impeller Blades Using an On-Machine Probe

Inspecting an impeller is a challenging task in manufacturing automation due to its free-form surface and overlapping and twisted blades. Existing inspection method by a Coordinate Measuring Machine is complex and time consuming, because of offline reclamping and manual operation. Automatic on-machine inspection without transferring and reclamping workpiece is a promising technique, and has found an extensive application in recent years. This paper proposes a novel method of interference-free inspection path generation for impeller blades using an on-machine probe. The accessibility cone is defined to search for the approach direction vectors of a probe cylinder, whereby the sizes of both cylinder rod and cylinder disk are considered. Then, the idea of area sweeping minimization is applied to construct an objective function from which required direction vectors of the probe cylinder in a smooth path are easily solved. The generated path can avoid the interference and collision between a moving probe cylinder with the overlapping blades, and guarantee stable speed and acceleration of the rotary motions of the five-axis machine tool. Its effectiveness is verified by the on-machine inspection experiments.

[1]  Han Ding,et al.  A GPU-based algorithm for generating collision-free and orientation-smooth five-axis finishing tool paths of a ball-end cutter , 2010 .

[2]  Byung-Kwon Min,et al.  Reduction of machining errors of a three-axis machine tool by on-machine measurement and error compensation system , 2004 .

[3]  Dong-Won Kim,et al.  CBIMS: Case-based impeller machining strategy support system , 2009 .

[4]  Chih-Hsing Chu,et al.  An integrated framework of tool path planning in 5-axis machining of centrifugal impeller with split blades , 2012, J. Intell. Manuf..

[5]  Alan C. Lin,et al.  Automatic inspection of turbine blades using a 3-axis CMM together with a 2-axis dividing head , 2005 .

[6]  Ying Zhang,et al.  Collision and interference correction for impeller machining with non-orthogonal four-axis machine tool , 2013 .

[7]  Dong-Won Kim,et al.  Computer-aided measurement plan for an impeller on a coordinate measurement machine with a rotating and tilting probe , 2008 .

[8]  Xiang Chen,et al.  Semiautomatic Model-Based View Planning for Active Triangulation 3-D Inspection Systems , 2015, IEEE/ASME Transactions on Mechatronics.

[9]  Kai Tang,et al.  Parametric representation of a surface pencil with a common spatial geodesic , 2004, Comput. Aided Des..

[10]  Han Ding,et al.  Visibility theory and algorithms with application to manufacturing processes , 2000 .

[11]  Jiancheng Liu,et al.  Autonomously Generative CMM Part Programming for In-Process Inspection , 2003 .

[12]  Laine Mears,et al.  Quality and Inspection of Machining Operations: CMM Integration to the Machine Tool , 2009 .

[13]  Reginaldo Teixeira Coelho,et al.  Development of a low cost Touch Trigger Probe for CNC Lathes , 2006 .

[14]  Barbara Motyl,et al.  Compensation of geometrical errors of CAM/CNC machined parts by means of 3D workpiece model adaptation , 2014, Comput. Aided Des..

[15]  Juan Luis Monterde García-Pozuelo.  Bézier surfaces of minimal area: The Dirichlet approach , 2004 .

[16]  Nan Wang,et al.  Automatic generation of gouge-free and angular-velocity-compliant five-axis toolpath , 2007, Comput. Aided Des..

[17]  H. T. Loh,et al.  Tool-path generation for five-axis machining of free-form surfaces based on accessibility analysis , 2002 .

[18]  J.R.R. Mayer,et al.  Validation of volumetric error compensation for a five-axis machine using surface mismatch producing tests and on-machine touch probing , 2014 .

[19]  M.-W. Cho,et al.  Inspection Planning Strategy for the On-Machine Measurement Process Based on CAD/CAM/CAI Integration , 2002 .

[20]  Fangyu Peng,et al.  A measurement strategy and an error-compensation model for the on-machine laser measurement of large-scale free-form surfaces , 2014 .

[21]  Nuodi Huang,et al.  5-Axis adaptive flank milling of flexible thin-walled parts based on the on-machine measurement , 2014 .

[22]  Sanjay E. Sarma,et al.  Generating 5-axis NC roughing paths directly from a tessellated representation , 2000, Comput. Aided Des..