Hydrogen from aqueous fraction of biomass pyrolysis liquids by catalytic steam reforming in fluidized bed

Sustainable pathways for producing hydrogen as a synthesis intermediate or as a clean energetic vector will be needed in the future. Renewable biomass resources should be taken into account in this new scenario. Processing through a pyrolysis step, optimized to high liquid production (bio-oil), increases the energy bulk density of biomass for transportation. Steam reforming of the aqueous fraction is an alternative process that increases the hydrogen content of the syngas. However, the thermochemical conversion of organic compounds derived from biomass involves drawbacks such as coke formation on the catalysts. This work studies the performance of Ni–Al catalysts modified with Ca or Mg in the steam reforming of the aqueous fraction of pyrolysis liquids and the resulting coke deposits. The catalyst composition influenced the quantity and type of coke deposits. Calcium improved the formation of carbonaceous products leading to lower H2/CO ratios while magnesium improved the WGS (water gas shift) reaction. The strategy of reducing the space velocity resulted in a low coke removal although the addition of small quantities of oxygen decreased the coke content of the catalyst by more than 50% weight. Greater efficiency and further catalyst development are needed to improve the energetic requirements of the process.

[1]  R. Bilbao,et al.  Hydrogen Production by Catalytic Steam Reforming of Acetol, a Model Compound of Bio-Oil , 2007 .

[2]  A. Lemonidou,et al.  Hydrogen Production via Reforming of the Aqueous Phase of Bio-Oil over Ni/Olivine Catalysts in a Spouted Bed Reactor , 2009 .

[3]  W. V. Swaaij,et al.  Catalytic and Noncatalytic Gasification of Pyrolysis Oil , 2007 .

[4]  S. Voutetakis,et al.  Hydrogen Production via Steam Reforming of the Aqueous Phase of Bio-Oil in a Fixed Bed Reactor , 2006 .

[5]  R. Bilbao,et al.  Hydrogen Production by Steam Reforming of Bio-Oil Using Coprecipitated Ni−Al Catalysts. Acetic Acid as a Model Compound , 2005 .

[6]  Enrico Bocci,et al.  Biomass to hydrogen for the realization of closed cycles of energy resources , 2007 .

[7]  A. K. Dalai,et al.  Synthesis Gas Production from Steam Gasification of Biomass-Derived Oil , 2003 .

[8]  Esteban Chornet,et al.  Catalytic steam reforming of biomass-derived oxygenates: acetic acid and hydroxyacetaldehyde , 1996 .

[9]  Jianhui He,et al.  Structural analysis of bio-oils from sub-and supercritical water liquefaction of woody biomass , 2007 .

[10]  Robert J. Evans,et al.  Hydrogen from biomass-production by steam reforming of biomass pyrolysis oil ☆ , 2007 .

[11]  Nikola Batina,et al.  Coke characterization for an industrial Pt–Sn/γ-Al2O3 reforming catalyst , 2005 .

[12]  A. M. Efstathiou,et al.  Characterization of Carbonaceous Species Formed during Reforming of CH4with CO2over Ni/CaO–Al2O3Catalysts Studied by Various Transient Techniques , 1996 .

[13]  S. Kersten,et al.  Evaporation of biomass fast pyrolysis oil: Evaluation of char formation , 2009 .

[14]  L. García,et al.  Catalytic steam reforming of model compounds of biomass pyrolysis liquids in fluidized bed reactor with modified Ni/Al catalysts , 2009 .

[15]  Fuchen Wang,et al.  Hydrogen production via catalytic steam reforming of fast pyrolysis bio-oil in a two-stage fixed bed reactor system , 2008 .

[16]  E. Wolf,et al.  Steam reforming of methane on reduced non-stoichiometric nickel aluminate catalysts , 1988 .

[17]  Xenophon E. Verykios,et al.  Steam reforming of the aqueous fraction of bio-oil over structured Ru/MgO/Al2O3 catalysts , 2007 .

[18]  Claude Mirodatos,et al.  Hydrogen production from crude pyrolysis oil by a sequential catalytic process , 2007 .

[19]  Richard L. Bain,et al.  Fluidizable reforming catalyst development for conditioning biomass-derived syngas , 2007 .

[20]  Lucía García,et al.  Catalytic steam reforming of bio-oils for the production of hydrogen : effects of catalyst composition , 2000 .

[21]  J. Fierro,et al.  Nickel/alumina catalysts modified by basic oxides for the production of synthesis gas by methane partial oxidation , 2006 .

[22]  Stefan Czernik,et al.  Hydrogen by Catalytic Steam Reforming of Liquid Byproducts from Biomass Thermoconversion Processes , 2002 .

[23]  Daniel Montané,et al.  Biomass to hydrogen via fast pyrolysis and catalytic steam reforming of the pyrolysis oil or its fractions , 1996 .

[24]  J. Afonso,et al.  The chemistry of coke deposits formed on a PtSn catalyst during dehydrogenation of n-alkanes to mono-olefins , 1994 .

[25]  David L. Trimm,et al.  Coke formation and minimisation during steam reforming reactions , 1997 .

[26]  Ayşe Eren Pütün,et al.  Rice straw as a bio-oil source via pyrolysis and steam pyrolysis. , 2004 .

[27]  H. Lasa,et al.  Coke Formation over a Nickel Catalyst under Methane Dry Reforming Conditions: Thermodynamic and Kinetic Models , 2005 .

[28]  Xianguo Hu,et al.  Characterization of the lubricity of bio-oil/diesel fuel blends by high frequency reciprocating test rig , 2010 .

[29]  Ayşe Eren Pütün,et al.  Bio-oil production from pyrolysis and steam pyrolysis of soybean-cake: product yields and composition , 2002 .

[30]  L. García,et al.  Catalytic steam reforming of acetic acid in a fluidized bed reactor with oxygen addition , 2008 .

[31]  Daniel Montané,et al.  Hydrogen from Biomass: Steam Reforming of Model Compounds of Fast-Pyrolysis Oil , 1999 .

[32]  F. Meunier,et al.  Steam reforming of model compounds and fast pyrolysis bio-oil on supported noble metal catalysts , 2005 .

[33]  Ger Devlin,et al.  A review of recent laboratory research and commercial developments in fast pyrolysis and upgrading , 2011 .

[34]  Nurgül Özbay,et al.  Characterization of bio-oil obtained from fruit pulp pyrolysis , 2008 .