Solid-state electrochemical synthesis of ammonia: a review

Ammonia is one of the most produced chemicals worldwide, and it is not only a major end product but also an important energy storage intermediate. The solid-state electrochemical synthesis of ammonia has the promise to overcome the limitations of the conventional catalytic reactors such as the limited conversion, severe environmental pollution and high energy consumption. Solid-state electrolytes either protonic or oxide ion conductors have been reviewed and particular emphasis is placed on their application to synthesise ammonia. The highest rate of ammonia formation according to the type of electrolyte utilised were in the following order; solid polymers > Ce0.8Gd0.2O2−δ-(Ca3(PO4)2-K3PO4) composites > fluorites > perovskites > pyrochlores although the catalysts in electrodes also play an important role. The highest rate reported so far is found to be 1.13 × 10−8 mol s−1 cm−2 at 80 °C with a potential of 2 V using Nafion membrane, SmFe0.7Cu0.1Ni0.2O3 (SFCN), and Ni-Ce0.8Sm0.2O2−δ as solid electrolyte, cathode and anode, respectively. Synthesising ammonia from steam and N2, by-passing H2 stage offers many advantages such as reduction of device numbers and then the overall costs. The factors affecting the rate of ammonia formation have been discussed as well.

[1]  G. Karagiannakis,et al.  ΝΗ3 decomposition in a proton conducting solid electrolyte cell , 2008 .

[2]  Ibrahim Dincer,et al.  Using ammonia as a sustainable fuel , 2008 .

[3]  Craig A. J. Fisher,et al.  Oxide-ion and proton conducting electrolyte materials for clean energy applications: structural and mechanistic features. , 2010, Chemical Society reviews.

[4]  M. Ouzounidou,et al.  Catalytic and electrocatalytic synthesis of NH3 in a H+ conducting cell by using an industrial fe catalyst , 2007 .

[5]  P. Zhou,et al.  Cost-effective yttrium doped ceria-based composite ceramic materials for intermediate temperature solid oxide fuel cell applications , 2001 .

[6]  Qing Yang,et al.  Preparation via microemulsion method and proton conduction at intermediate-temperature of BaCe1−xYxO3−α , 2009 .

[7]  Michael Stoukides,et al.  High temperature proton conductors: Applications in catalytic processes , 2007 .

[8]  G. Ma,et al.  Preparation, proton conduction, and application in ammonia synthesis at atmospheric pressure of La0.9Ba0.1Ga1–xMgxO3–α , 2008, Journal of Materials Science.

[9]  K. Kreuer.  First published online as a Review in Advance on April 9, 2003 PROTON-CONDUCTING OXIDES , 2022 .

[10]  T. Mori,et al.  Electrochemical studies on ionic conduction in Ca-doped BaCeO3 , 1995 .

[11]  T. Ohashi,et al.  Proton conductors of oxide and their application to research into metal-hydrogen systems , 1995 .

[12]  Ming-hua Zhou,et al.  Sol–gel processing of In-doped CaZrO3 solid electrolyte and the impedimetric sensing characteristics of humidity and hydrogen , 2008 .

[13]  R. Slade,et al.  The perovskite-type proton-conducting solid electrolyte BaCe0.90Y0.10O3−α in high temperature electrochemical cells , 1993 .

[14]  Ruiquan Liu,et al.  Comparison of Electrochemical Synthesis of Ammonia by Using Sulfonated Polysulfone and Nafion Membrane with Sm1.5Sr0.5NiO4 , 2010 .

[15]  W. Winiwarter,et al.  How a century of ammonia synthesis changed the world , 2008 .

[16]  J. Janek,et al.  Oxide nitrides: From oxides to solids with mobile nitrogen ions , 2009 .

[17]  John B. Goodenough.  Oxide-ion electrolytes , 2003 .

[18]  Zheng Xu,et al.  Preparation of double-doped BaCeO3 and its application in the synthesis of ammonia at atmospheric pressure , 2007 .

[19]  Gaochao Xu,et al.  Sm1.5Sr0.5MO4 (M=Ni, Co, Fe) Cathode Catalysts for Ammonia Synthesis at Atmospheric Pressure and Low Temperature , 2009 .

[20]  I. Oguocha,et al.  Characterisation of AA2618 containing alumina particles , 1997 .

[21]  M. Stoukides,et al.  Modelling of equilibrium limited hydrogenation reactions carried out in H+ conducting solid oxide membrane reactors , 1996 .

[22]  G. Meng,et al.  Novel intermediate temperature ceramic fuel cells with doped ceria-based composite electrolytes , 2002 .

[23]  Yahong Xie,et al.  Preparation of BaCe0.8Gd0.2O3−δ by the citrate method and its application in the synthesis of ammonia at atmospheric pressure , 2005 .

[24]  Jin Wang,et al.  Electrochemical synthesis of ammonia using a cell with a Nafion membrane and SmFe 0.7 Cu 0.3− x Ni x O 3 ( x = 0−0.3) cathode at atmospheric pressure and lower temperature , 2009 .

[25]  Takashi Hibino,et al.  Protonic conduction in calcium, strontium and barium zirconates , 1993 .

[26]  Bin Zhu,et al.  Innovative low temperature SOFCs and advanced materials , 2003 .

[27]  J. Mizusaki,et al.  The atomic hydrogen permeability in (CeO2)0.85(CaO)0.15 at high temperatures , 2001 .

[28]  T. Schober.  Composites of Ceramic High-Temperature Proton Conductors with Inorganic Compounds , 2005 .

[29]  Stephen J. Skinner,et al.  Oxygen ion conductors , 2003 .

[30]  C. Wagner.  Adsorbed Atomic Species as Intermediates in Heterogeneous Catalysis , 1970 .

[31]  T. Nohira,et al.  Electrolytic ammonia synthesis from water and nitrogen gas in molten salt under atmospheric pressure , 2005 .

[32]  Zheng-fang Zhang,et al.  Cathode catalysis performance of SmBaCuMO5+δ (M=Fe, Co, Ni) in ammonia synthesis , 2010 .

[33]  K. Liang,et al.  Some factors that determine proton conductivity in nonstoichiometric complex perovskites , 1999 .

[34]  V. Kharton,et al.  Transport properties of solid oxide electrolyte ceramics: a brief review , 2004 .

[35]  J. Isasi,et al.  Ionic conductivity of a new defect pyrochlore , 1996 .

[36]  D. Perednis,et al.  Fabrication of thin electrolytes for second-generation solid oxide fuel cells , 2000 .

[37]  Ibrahim Dincer,et al.  Ammonia as a green fuel and hydrogen source for vehicular applications , 2009 .

[38]  G. Marnellos,et al.  The use of proton conducting solid electrolytes for improved performance of hydro- and dehydrogenation reactors , 1997 .

[39]  U. Varadaraju,et al.  Oxide ion conductivity in some substituted rare earth pyrozirconates , 1995 .

[40]  Yang Du,et al.  Galvanic cell measurements on a fast proton conducting complex perovskite electrolyte , 1996 .

[41]  M. Dudek.  Usefulness of gel-casting method in the fabrication of nonstoichiometric CaZrO3-based electrolytes for high temperature application , 2009 .

[42]  Jianzhong Xiao,et al.  A Microwave-induced Solution-polymerization Synthesis of Doped LaGaO3 Powders , 2006 .

[43]  Yahong Xie,et al.  Protonic conduction in Ca2+-doped La2M2O7 (M = Ce, Zr) with its application to ammonia synthesis electrochemically , 2005 .

[44]  B. Zhu,et al.  Samarium doped ceria–(Li/Na)2CO3 composite electrolyte and its electrochemical properties in low temperature solid oxide fuel cell , 2010 .

[45]  R. Lan,et al.  Electrochemical synthesis of ammonia based on a carbonate-oxide composite electrolyte , 2011 .

[46]  G. Kyriacou,et al.  Electrochemical synthesis of ammonia at atmospheric pressure and low temperature in a solid polymer electrolyte cell , 2000 .

[47]  H. Iwahara,et al.  Ionic conduction in pyrochlore-type oxides containing rare earth elements at high temperature , 1996 .

[48]  N. Sakai,et al.  Determination of hydrogen solubility in oxide ceramics by using SIMS analyses , 1999 .

[49]  C. Vancini,et al.  Synthesis of ammonia , 1971 .

[50]  Yahong Xie,et al.  Synthesis of ammonia from natural gas at atmospheric pressure with doped ceria–Ca3(PO4)2–K3PO4 composite electrolyte and its proton conductivity at intermediate temperature , 2006 .

[51]  S. Haile,et al.  Connection between oxygen-ion conductivity of pyrochlore fuel-cell materials and structural change with composition and temperature , 2000 .

[52]  C. Shi,et al.  First-principles study of protonic conduction in In-doped AZrO3 (A=Ca, Sr, Ba) , 2005 .

[53]  K. Kreuer,et al.  On the development of proton conducting materials for technological applications , 1997 .

[54]  B. Zhu.  Advantages of intermediate temperature solid oxide fuel cells for tractionary applications , 2001 .

[55]  Aglaia Skodra,et al.  Electrocatalytic synthesis of ammonia from steam and nitrogen at atmospheric pressure , 2009 .

[56]  G. Ma,et al.  Proton conduction in BaCe1−xGdxO3−α at intermediate temperature and its application to synthesis of ammonia at atmospheric pressure , 2009 .

[57]  Dmitry Medvedev,et al.  Investigation of the protonic conduction in Sm doped BaCeO3 , 2008 .

[58]  H. Iwahara.  Oxide-ionic and protonic conductors based on perovskite-type oxides and their possible applications , 1992 .

[59]  F. Zhang,et al.  Proton Conduction in La0.9Sr0.1Ga0.8Mg0.2O3-α , 2006 .

[60]  N. Sammes,et al.  Physical, chemical and electrochemical properties of pure and doped ceria , 2000 .

[61]  A. Katsaounis,et al.  High-Pressure Electrochemical Promotion of Ammonia Synthesis over an Industrial Iron Catalyst , 2000 .

[62]  H. Bohn,et al.  The high temperature proton conductor Ba3Ca1.18Nb1.82O9−δ. I. Electrical conductivity , 1999 .

[63]  J. Irvine,et al.  Structure and properties of nonstoichiometric mixed perovskites A3B′1+xB″2−xO9−δ , 2002 .

[64]  R. Hempelmann,et al.  Thin films of proton conducting SrZrO3-ceramics prepared by the sol-gel method , 1995 .

[65]  G. Marnellos,et al.  Modelling of solid oxide proton conducting reactor-cells: thermodynamics and kinetics , 1996 .

[66]  M. Ouzounidou,et al.  NH3 decomposition in a single-chamber proton conducting cell , 2006 .

[67]  Yahong Xie,et al.  Synthesis of ammonia at atmospheric pressure with Ce0.8M0.2O2−δ (M = La, Y, Gd, Sm) and their proton conduction at intermediate temperature , 2006 .

[68]  Yanguang Li,et al.  Microstructures and proton conduction behaviors of Dy-doped BaCeO3 ceramics at intermediate temperature , 2010 .

[69]  Hongfei Lin,et al.  Simple and rapid preparation of Ce0.9Gd0.1O1.95 electrolyte films for anode-supported solid oxide fuel cells , 2011 .

[70]  J. Schoonman,et al.  A wet-chemical method for the synthesis of in-doped CaZrO3 ceramic powders , 1999 .

[71]  T. Norby.  Solid-state protonic conductors: principles, properties, progress and prospects , 1999 .

[72]  K. Kreuer.  Proton Conductivity: Materials and Applications , 1996 .

[73]  D. Leung,et al.  Technological development of hydrogen production by solid oxide electrolyzer cell (SOEC) , 2008 .

[74]  G. Ma,et al.  Proton conduction at intermediate temperature and its application in ammonia synthesis at atmospheric pressure of BaCe1−xCaxO3−α , 2010 .

[75]  J. Phair,et al.  Review of proton conductors for hydrogen separation , 2006 .

[76]  T. Mazanec.  Prospects for ceramic electrochemical reactors in industry , 1994 .

[77]  Qinghua Liu,et al.  Intermediate temperature fuel cell with a doped ceria-carbonate composite electrolyte , 2010 .

[78]  Zhipeng Sun,et al.  Preparation of La1.9Ca0.1Zr2O6.95 with pyrochlore structure and its application in synthesis of ammonia at atmospheric pressure , 2004 .

[79]  G. Marnellos,et al.  Ammonia synthesis at atmospheric pressure , 1998, Science.

[80]  Q. Yang,et al.  Proton conduction in La0.9Sr0.1Ga0.8Mg0.2O3−α ceramic prepared via microemulsion method and its application in ammonia synthesis at atmospheric pressure , 2007 .

[81]  J. Nørskov,et al.  Ammonia for hydrogen storage: challenges and opportunities , 2008 .

[82]  H. Iwahara,et al.  Proton conduction in non-perovskite-type oxides at elevated temperatures , 2001 .

[83]  L. Green.  An ammonia energy vector for the hydrogen economy , 1982 .

[84]  H. Bohn,et al.  The high temperature proton conductor Ba3Ca1.18Nb1.82O9−δ: Part II: electrochemical cell measurements and TEM , 1999 .

[85]  G. Ma,et al.  Ammonia synthesis at atmospheric pressure using a reactor with thin solid electrolyte BaCe0.85Y0.15O3−α membrane , 2010 .

[86]  Wang Ji-de,et al.  Application of Proton Conductors (Ce 0.8 La 0.2 ) 1－x Ca x O 2－δ in Synthesis of Ammonia , 2005 .

[87]  Yahong Xie,et al.  A novel method for preparation of doped Ba3(Ca1.18Nb1.82)O9−δ: Application to ammonia synthesis at atmospheric pressure , 2005 .

[88]  F. Tietz,et al.  Dilatometry of the high-temperature proton conductor Ba3Ca1.18Nb1.82O9 − δ , 1997 .

[89]  H. Iwahara,et al.  High temperature-type proton conductive solid oxide fuel cells using various fuels , 1986 .

[90]  Electrolytic synthesis of ammonia in molten salts under atmospheric pressure. , 2003, Journal of the American Chemical Society.

[91]  G. Marnellos,et al.  Polarization studies in the Pd∣SrCe0.95Yb0.05O2.975∣Pd proton conducting solid electrolyte cell , 1999 .

[92]  T. Schober,et al.  The high-temperature proton conductor Ba3(Ca1.18Nb1.82)O9−gd: Thermogravimetry of the water uptake , 1996 .

[93]  O. Tillement.  Solid state ionics electrochemical devices , 1994 .

[94]  M. Tanaka,et al.  Recovery of hydrogen from gas mixture by an intermediate-temperature type proton conductor , 2010 .

[95]  R. Lan,et al.  Direct ammonia alkaline anion-exchange membrane fuel cells , 2010 .

[96]  C. Catlow,et al.  Defects and diffusion in pyrochlore structured oxides , 1998 .

[97]  R. Gerbasi,et al.  Role of synthetic route on the transport properties of BaCe1−xYxO3 proton conductor , 2009 .

[98]  Bin Zhu,et al.  Functional ceria–salt-composite materials for advanced ITSOFC applications , 2003 .

[99]  G. Marnellos,et al.  Synthesis of Ammonia at Atmospheric Pressure with the Use of Solid State Proton Conductors , 2000 .

[100]  H. Iwahara,et al.  Proton conduction in sintered oxides and its application to steam electrolysis for hydrogen production , 1981 .

[101]  Allan J. Jacobson,et al.  Materials for Solid Oxide Fuel Cells , 2010 .

[102]  T. Hibino,et al.  Evaluation of proton conductivity in SrCeO3, BaCeO3, CaZrO3 and SrZrO3 by temperature programmed desorption method , 1992 .

[103]  Srinivas Palanki,et al.  Analysis of ammonia decomposition reactor to generate hydrogen for fuel cell applications , 2010 .

[104]  Weishen Yang,et al.  Direct ammonia solid oxide fuel cell based on thin proton-conducting electrolyte , 2008 .

[105]  A. Nowick,et al.  High-temperature protonic conductors with perovskite-related structures , 1995 .