Preliminary Study on Shape Sensing for Continuum Robot Affected by External Load Using Piecewise Fitting Curves

This paper proposes a new method of shape sensing for continuum robot affected by external load using piecewise fitting curves. This scheme will integrate posture sensors into continuum robot, and then the shape is reconstructed by piecewise fitting Bézier curves. The simulation analysis is used to analyze the curvature and radius change of each section of the continuum robot, when the end of the bending continuum robot with constant curvature is subjected to external load. The layout scheme of sensors is determined according to the curvature and radius of each section. The shape of image recognition is compared with the shape of piecewise fitting cubic Bézier curves in simulation. The maximum tracking error is 1.4 mm and the minimum tracking error is 0.006 mm. The simulation results verify the accuracy and feasibility of this method.

[1]  Alan D. Kersey,et al.  Shape and vibration mode sensing using a fiber optic Bragg grating array , 1996 .

[2]  S. Misra,et al.  Three-Dimensional Needle Shape Reconstruction Using an Array of Fiber Bragg Grating Sensors , 2014, IEEE/ASME Transactions on Mechatronics.

[3]  Chung-Li Tai,et al.  Virtual binocular vision systems to solid model reconstruction , 2007 .

[4]  Li Liu,et al.  Preliminary study on magnetic tracking-based planar shape sensing and navigation for flexible surgical robots in transoral surgery: methods and phantom experiments , 2018, International Journal of Computer Assisted Radiology and Surgery.

[5]  R. J. Black,et al.  Real-Time Estimation of 3-D Needle Shape and Deflection for MRI-Guided Interventions , 2010, IEEE/ASME Transactions on Mechatronics.

[6]  C. Laschi,et al.  Sensorization of continuum soft robots for reconstructing their spatial configuration , 2012, 2012 4th IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob).

[7]  Charles V. Stewart,et al.  The Trinocular General Support Algorithm: A Three-camera Stereo Algorithm For Overcoming Binocular Matching Errors , 1988, [1988 Proceedings] Second International Conference on Computer Vision.

[8]  Shuang Song,et al.  Real-Time Shape Estimation for Wire-Driven Flexible Robots With Multiple Bending Sections Based on Quadratic Bézier Curves , 2015, IEEE Sensors Journal.

[9]  Shuichi Wakimoto,et al.  Beautiful Flexible Microactuator changing its structural color with variable pitch grating , 2011, 2011 IEEE International Conference on Robotics and Automation.

[10]  Rajni V. Patel,et al.  Shape sensing for torsionally compliant concentric-tube robots , 2016, SPIE BiOS.

[11]  Russell H. Taylor,et al.  Shape Tracking of a Dexterous Continuum Manipulator Utilizing Two Large Deflection Shape Sensors , 2015, IEEE Sensors Journal.

[12]  Guang-Zhong Yang,et al.  Vision-based intraoperative shape sensing of concentric tube robots , 2015, 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[13]  D. Caleb Rucker,et al.  Visual sensing of continuum robot shape using self-organizing maps , 2010, 2010 IEEE International Conference on Robotics and Automation.

[14]  Dragos Axinte,et al.  A Novel Continuum Robot Using Twin-Pivot Compliant Joints: Design, Modeling, and Validation , 2016 .

[15]  Yantao Shen,et al.  Integrated sensing for ionic polymer–metal composite actuators using PVDF thin films , 2007 .

[16]  Alon Wolf,et al.  Shape Tracking of Planar Hyper-Flexible Beams via Embedded PVDF Deflection Sensors , 2014, IEEE/ASME Transactions on Mechatronics.

[17]  Sarthak Misra,et al.  Steering of Multisegment Continuum Manipulators Using Rigid-Link Modeling and FBG-Based Shape Sensing , 2016, IEEE Transactions on Robotics.

[18]  D. Caleb Rucker,et al.  A Geometrically Exact Model for Externally Loaded Concentric-Tube Continuum Robots , 2010, IEEE Transactions on Robotics.

[19]  Mohsen Shahinpoor,et al.  Dynamic curvature sensing employing ionic-polymer–metal composite sensors , 2011 .

[20]  Ian D. Walker,et al.  Real-time shape estimation for continuum robots using vision , 2005, Robotica.

[21]  Dragos Axinte,et al.  Development of a slender continuum robotic system for on-wing inspection/repair of gas turbine engines , 2017 .