Voltage feedback based flux-weakening control of IPMSMs with fuzzy-PI controller

[1]  Roberto Petrella,et al.  Feedforward Flux-Weakening Control of Surface-Mounted Permanent-Magnet Synchronous Motors Accounting for Resistive Voltage Drop , 2010, IEEE Transactions on Industrial Electronics.

[2]  C. Xia,et al.  Improving rotor geometry to strengthen anti-demagnetization ability of PM , 2017 .

[3]  Kai Wang,et al.  Advances on Single-Phase Line-Start High Efficiency Interior Permanent Magnet Motors , 2012, IEEE Transactions on Industrial Electronics.

[4]  G. Stumberger,et al.  Novel Field-Weakening Control Scheme for Permanent-Magnet Synchronous Machines Based on Voltage Angle Control , 2012, IEEE Transactions on Industry Applications.

[5]  H. Fujimoto,et al.  A Precise Model-Based Design of Voltage Phase Controller for IPMSM , 2013, IEEE Transactions on Power Electronics.

[6]  Gianmario Pellegrino,et al.  Direct-Flux Vector Control of IPM Motor Drives in the Maximum Torque Per Voltage Speed Range , 2012, IEEE Transactions on Industrial Electronics.

[7]  Wei Xu,et al.  Novel Composite Sliding Mode Control for PMSM Drive System Based on Disturbance Observer , 2016, IEEE Transactions on Applied Superconductivity.

[8]  Zhenfei Chen,et al.  A harmonic current injection method for electromagnetic torque ripple suppression in permanent-magnet synchronous machines , 2017 .

[9]  Xing Chen,et al.  An analytical model of unbalanced magnetic pull for PMSM used in electric vehicle: Numerical and experimental validation , 2017 .

[10]  X. Liu,et al.  Efficiency Improvement of Switched Flux PM Memory Machine Over Interior PM Machine for EV/HEV Applications , 2014, IEEE Transactions on Magnetics.