Computation and Measurement of Flow and Combustion in a Four-Valve Engine with Intake Variations

[1]  Paul A. Libby,et al.  Passage Times and Flamelet Crossing Frequencies in Premixed Turbulent Combustion , 1986 .

[2]  G. Bruneaux,et al.  Direct simulation and modeling of flame-wall interaction for premixed turbulent combustion☆ , 1993 .

[3]  J. Heywood,et al.  How Heat Losses to the Spark Plug Electrodes Affect Flame Kernel Development in an SI-Engine , 1990 .

[4]  Daniel C. Haworth,et al.  Multidimensional Port-and-in-Cylinder Flow Calculations and Flow Visualization Study in an Internal Combustion Engine with Different Intake Configurations , 1994 .

[5]  Yann Guezennec,et al.  Characterization of Intake-Generated Flow Fields in I.C. Engines Using 3-D Particle Tracking Velocimetry (3-D PTV) , 1994 .

[6]  Rolf D. Reitz,et al.  Computation of Premixed-Charge Combustion in Pancake and Pent-Roof Engines , 1989 .

[7]  R. Blint.  Stretch in Premixed Laminar Flames Under IC Engine Conditions , 1991 .

[8]  Bahram Khalighi,et al.  Intake-generated swirl and tumble motions in a 4-valve engine with various intake configurations-flow visualization and particle tracking velocimetry , 1990 .

[9]  Frediano V. Bracco,et al.  Three-dimensional visualization of premixed-charge engine flames : islands of reactants and products, fractal dimensions, and homogeneity , 1988 .

[10]  H. Affes,et al.  Use of Experimentally Measured In-Cylinder Flow Field Data at IVC as Initial Conditions to CFD Simulations of Compression Stroke in I.C. Engines - A Feasibility Study , 1994 .

[11]  W. Pfister,et al.  Cycle-Resolved Two-Dimensional Flame Visualization in a Spark-Ignition Engine , 1988 .

[12]  D. Haworth,et al.  Probability density function approach for multidimensional turbulentflow calculations with application to in-cylinder flows in reciprocating engines , 1991 .

[13]  Ken Naitoh,et al.  Large eddy simulation of premixed-flame in engine based on the multi-level formulation and the renormalization group theory , 1992 .

[14]  A. A. Amsden,et al.  KIVA-II: A Computer Program for Chemically Reactive Flows with Sprays , 1989 .

[15]  Tang-Wei Kuo,et al.  An experimental and computational evaluation of two dual-intake-valve combustion chambers , 1990 .

[16]  J. H. Whitelaw,et al.  Tumbling Motion: A Mechanism for Turbulence Enhancement in Spark-Ignition Engines , 1990 .

[17]  R. Adrian,et al.  Velocity, Vorticity, and Strain-Rate Ahead of a Flame Measured in an Engine Using Particle Image Velocimetry , 1990 .

[18]  J. Keck,et al.  Turbulent flame propagation and combustion in spark ignition engines , 1983 .

[19]  Christoph Espey,et al.  Diesel Engine Combustion Modeling Using the Coherent Flame Model in Kiva-II , 1993 .

[20]  Thierry Mantel,et al.  Three Dimensional Study of Flame Kernel Formation Around a Spark Plug , 1992 .

[21]  Daniel C. Haworth,et al.  A global approach to error estimation and physical diagnostics in multidimensional computational fluid dynamics , 1993 .

[22]  Thierry Poinsot,et al.  Numerical simulations of Lewis number effects in turbulent premixed flames , 1992, Journal of Fluid Mechanics.

[23]  A. C. Alkidas,et al.  Combustion and Heat Transfer Studies in a Spark-Ignited Multivalve Optical Engine , 1990 .

[24]  Daniel C. Haworth,et al.  Directions in Turbulence Modeling for In-Cylinder Flows in Reciprocating Engines , 1992 .

[25]  Mark S. Huebler,et al.  A Transient Water Analog of a Dual-Intake-Valve Engine for Intake Flow Visualization and Full-Field Velocity Measurements , 1988 .

[26]  Stephen B. Pope,et al.  The importance of time-dependent flame structures in stretched laminar flamelet models for turbulent jet diffusion flames , 1989 .

[27]  Derek Bradley,et al.  Dependence of turbulent burning velocity on turbulent reynolds number and ratio of flaminar burning velocity to R.M.S. turbulent velocity , 1977 .

[28]  J. H. Lienesch,et al.  Engine Improvements through Combustion Modeling , 1980 .

[29]  G. Sivashinsky,et al.  Flame Front Propagation in Nonsteady Hydrodynamic Fields , 1988 .

[30]  C. Arcoumanis,et al.  Fluid Mechanics of Internal Combustion Engines—a Review* , 1987 .

[31]  Todd D. Fansler,et al.  The Scavenging Flow Field in a Crankcase-Compression Two-Stroke Engine - A Three-Dimensional Laser-Velocimetry Survey , 1992 .

[32]  S. E. Tahry,et al.  Application of a Reynolds Stress Model to Engine-Like Flow Calculations , 1985 .

[33]  J. Ferziger,et al.  Structure and propagation speeds of turbulent premixed flames—A numerical study , 1991 .

[34]  M. T. Overington.  Combustion in Spark-ignition Engines , 1990 .

[35]  Frediano V. Bracco,et al.  Two-Dimensional Visualization of Premixed-Charge Flame Structure in an IC Engine - SP-715 , 1987 .

[36]  P. Ronney,et al.  A Comparison of Ignition Phenomena Modelled with Detailed and Simplified Kinetics , 1993 .

[37]  S. E. Tahry.  K-epsilon equation for compressible reciprocating engine flows , 1983 .

[38]  Stephen B. Pope,et al.  Computations of turbulent combustion: Progress and challenges , 1991 .

[39]  Charles A. Amann,et al.  Combustion Modeling in Reciprocating Engines , 1980 .

[40]  A. D. Gosman,et al.  Flow in a Model Engine with a Shrouded Valve-A Combined Experimental and Computational Study , 1985 .

[41]  S. H. El Tahry,et al.  A turbulent-combustion model for homogeneous charge engines , 1990 .

[42]  Daniel C. Haworth,et al.  Multidimensional Port-and-Cylinder Flow Calculations for Two- and Four-Valve-Per-Cylinder Engines: Influence of Intake Configuration on Flow Structure , 1990 .

[43]  Thierry Poinsot,et al.  Quenching processes and premixed turbulent combustion diagrams , 1991, Journal of Fluid Mechanics.

[44]  Stephen B. Pope,et al.  Propagating surfaces in isotropic turbulence , 1992, Journal of Fluid Mechanics.

[45]  Sharath S. Girimaji.  Proceedings of the First ICASE/LARC industry Roundtable Held at Williamsburg, Virginia on 3-4 October 1994. , 1995 .

[46]  L. Goss,et al.  Images of the quenching of a flame by a vortex-To quantify regimes of turbulent combustion , 1993 .

[47]  Toshio Yamada,et al.  Numerical Analysis of Flow in the Induction System of an Internal Combustion Engine -Multi-Dimensional Calculation Using a New Method of Lines , 1990 .