Simulation-Based Comparison Between the Thermal Behavior of Coaxial and Double U-Tube Borehole Heat Exchangers

In this study, the thermal behavior of the coaxial and double U borehole heat exchangers was investigated using numerical simulations in both the long- and short-term. As a reference for borehole heat exchanger specifications, the existing coaxial and double U probes of a geothermal heat pump installed within the Horizon 2020 research project named “Cheap GSHPs” were considered. Nine years of simulations revealed that when borehole heat exchangers are subjected to a balanced thermal load, and intermittent operating modes of the ground source heat pump system are set, the coaxial pipes’ configuration provides better thermal performance due to the higher thermal capacitance of the heat-carrier fluid and the lower borehole thermal resistance. The analysis was conducted considering two different types of ground with different thermal conductivity values. As result, the more conductive ground type highlights the higher yield of the coaxial probe.

[1]  Enzo Zanchini,et al.  Improving the thermal performance of coaxial borehole heat exchangers , 2010 .

[2]  B. Palm,et al.  Distributed thermal response tests on pipe-in-pipe borehole heat exchangers , 2013 .

[3]  Z. Fang,et al.  Heat transfer analysis of boreholes in vertical ground heat exchangers , 2003 .

[4]  Michele De Carli,et al.  Short time-step performances of coaxial and double U-tube borehole heat exchangers: Modeling and measurements , 2011, HVAC&R Research.

[5]  V. C. Mei,et al.  Vertical concentric-tube ground-coupled heat exchangers , 1983 .

[6]  Paolo Conti,et al.  Dimensionless Maps for the Validity of Analytical Ground Heat Transfer Models for GSHP Applications , 2016 .

[7]  J. C. Jaeger,et al.  Conduction of Heat in Solids , 1952 .

[8]  Harry J. Braud,et al.  Thermal Exchange to Earth with Concentric Well Pipes , 1980 .

[9]  Jasmin Raymond,et al.  Designing coaxial ground heat exchangers with a thermally enhanced outer pipe , 2015, Geothermal Energy.

[10]  D. Marcotte,et al.  On the estimation of thermal resistance in borehole thermal conductivity test , 2008 .

[11]  G. Hellström.  Ground heat storage : thermal analyses of duct storage systems , 1991 .

[12]  E. Zanchini,et al.  Finite-element analysis of the fluid temperature distribution in double U-tube Borehole Heat Exchangers , 2016 .

[13]  Z. Fang,et al.  A finite line‐source model for boreholes in geothermal heat exchangers , 2002 .

[14]  G. Florides,et al.  A review of the design aspects of ground heat exchangers , 2018, Renewable and Sustainable Energy Reviews.

[15]  Saffa Riffat,et al.  Comparative performance of ‘U-tube’ and ‘coaxial’ loop designs for use with a ground source heat pump. , 2012 .

[16]  Stefano Lazzari,et al.  Effects of flow direction and thermal short-circuiting on the performance of small coaxial ground heat exchangers , 2010 .

[17]  Michele De Carli,et al.  Short time step analysis of vertical ground-coupled heat exchangers: The approach of CaRM , 2011 .